Commit 1971b9d5 authored by Ville Syrjala's avatar Ville Syrjala Committed by Dmitry Torokhov

Input: ati_remote2 - add loadable keymap support

Support for loadable keymaps. The driver now supports individual
keymaps for each of the five modes (AUX1-AUX4 and PC) of the
remote. To achieve this the keymap scancode is interpreted as a
combination of the mode and actual button scancode. The original
keycode patches were done by Peter Stokes <linux@dadeos.co.uk>
but I modified it quite a lot.
Signed-off-by: default avatarVille Syrjala <syrjala@sci.fi>
Signed-off-by: default avatarDmitry Torokhov <dtor@mail.ru>
parent 8c4b3c29
/*
* ati_remote2 - ATI/Philips USB RF remote driver
*
* Copyright (C) 2005 Ville Syrjala <syrjala@sci.fi>
* Copyright (C) 2007 Peter Stokes <linux@dadeos.freeserve.co.uk>
* Copyright (C) 2005-2008 Ville Syrjala <syrjala@sci.fi>
* Copyright (C) 2007-2008 Peter Stokes <linux@dadeos.co.uk>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
......@@ -12,7 +12,7 @@
#include <linux/usb/input.h>
#define DRIVER_DESC "ATI/Philips USB RF remote driver"
#define DRIVER_VERSION "0.2"
#define DRIVER_VERSION "0.3"
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_VERSION(DRIVER_VERSION);
......@@ -27,7 +27,7 @@ MODULE_LICENSE("GPL");
* A remote's "channel" may be altered by pressing and holding the "PC" button for
* approximately 3 seconds, after which the button will slowly flash the count of the
* currently configured "channel", using the numeric keypad enter a number between 1 and
* 16 and then the "PC" button again, the button will slowly flash the count of the
* 16 and then press the "PC" button again, the button will slowly flash the count of the
* newly configured "channel".
*/
......@@ -45,9 +45,18 @@ static struct usb_device_id ati_remote2_id_table[] = {
};
MODULE_DEVICE_TABLE(usb, ati_remote2_id_table);
static struct {
int hw_code;
int key_code;
enum {
ATI_REMOTE2_AUX1,
ATI_REMOTE2_AUX2,
ATI_REMOTE2_AUX3,
ATI_REMOTE2_AUX4,
ATI_REMOTE2_PC,
ATI_REMOTE2_MODES,
};
static const struct {
u8 hw_code;
u16 keycode;
} ati_remote2_key_table[] = {
{ 0x00, KEY_0 },
{ 0x01, KEY_1 },
......@@ -73,6 +82,7 @@ static struct {
{ 0x37, KEY_RECORD },
{ 0x38, KEY_DVD },
{ 0x39, KEY_TV },
{ 0x3f, KEY_PROG1 }, /* AUX1-AUX4 and PC */
{ 0x54, KEY_MENU },
{ 0x58, KEY_UP },
{ 0x59, KEY_DOWN },
......@@ -91,15 +101,9 @@ static struct {
{ 0xa9, BTN_LEFT },
{ 0xaa, BTN_RIGHT },
{ 0xbe, KEY_QUESTION },
{ 0xd5, KEY_FRONT },
{ 0xd0, KEY_EDIT },
{ 0xd5, KEY_FRONT },
{ 0xf9, KEY_INFO },
{ (0x00 << 8) | 0x3f, KEY_PROG1 },
{ (0x01 << 8) | 0x3f, KEY_PROG2 },
{ (0x02 << 8) | 0x3f, KEY_PROG3 },
{ (0x03 << 8) | 0x3f, KEY_PROG4 },
{ (0x04 << 8) | 0x3f, KEY_PC },
{ 0, KEY_RESERVED }
};
struct ati_remote2 {
......@@ -117,6 +121,9 @@ struct ati_remote2 {
char name[64];
char phys[64];
/* Each mode (AUX1-AUX4 and PC) can have an independent keymap. */
u16 keycode[ATI_REMOTE2_MODES][ARRAY_SIZE(ati_remote2_key_table)];
};
static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id);
......@@ -172,7 +179,7 @@ static void ati_remote2_input_mouse(struct ati_remote2 *ar2)
mode = data[0] & 0x0F;
if (mode > 4) {
if (mode > ATI_REMOTE2_PC) {
dev_err(&ar2->intf[0]->dev,
"Unknown mode byte (%02x %02x %02x %02x)\n",
data[3], data[2], data[1], data[0]);
......@@ -191,7 +198,7 @@ static int ati_remote2_lookup(unsigned int hw_code)
{
int i;
for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++)
for (i = 0; i < ARRAY_SIZE(ati_remote2_key_table); i++)
if (ati_remote2_key_table[i].hw_code == hw_code)
return i;
......@@ -211,7 +218,7 @@ static void ati_remote2_input_key(struct ati_remote2 *ar2)
mode = data[0] & 0x0F;
if (mode > 4) {
if (mode > ATI_REMOTE2_PC) {
dev_err(&ar2->intf[1]->dev,
"Unknown mode byte (%02x %02x %02x %02x)\n",
data[3], data[2], data[1], data[0]);
......@@ -219,10 +226,6 @@ static void ati_remote2_input_key(struct ati_remote2 *ar2)
}
hw_code = data[2];
/*
* Mode keys (AUX1-AUX4, PC) all generate the same code byte.
* Use the mode byte to figure out which one was pressed.
*/
if (hw_code == 0x3f) {
/*
* For some incomprehensible reason the mouse pad generates
......@@ -236,8 +239,6 @@ static void ati_remote2_input_key(struct ati_remote2 *ar2)
if (data[1] == 0)
ar2->mode = mode;
hw_code |= mode << 8;
}
if (!((1 << mode) & mode_mask))
......@@ -260,8 +261,8 @@ static void ati_remote2_input_key(struct ati_remote2 *ar2)
case 2: /* repeat */
/* No repeat for mouse buttons. */
if (ati_remote2_key_table[index].key_code == BTN_LEFT ||
ati_remote2_key_table[index].key_code == BTN_RIGHT)
if (ar2->keycode[mode][index] == BTN_LEFT ||
ar2->keycode[mode][index] == BTN_RIGHT)
return;
if (!time_after_eq(jiffies, ar2->jiffies))
......@@ -276,7 +277,7 @@ static void ati_remote2_input_key(struct ati_remote2 *ar2)
return;
}
input_event(idev, EV_KEY, ati_remote2_key_table[index].key_code, data[1]);
input_event(idev, EV_KEY, ar2->keycode[mode][index], data[1]);
input_sync(idev);
}
......@@ -334,10 +335,60 @@ static void ati_remote2_complete_key(struct urb *urb)
"%s(): usb_submit_urb() = %d\n", __func__, r);
}
static int ati_remote2_getkeycode(struct input_dev *idev,
int scancode, int *keycode)
{
struct ati_remote2 *ar2 = input_get_drvdata(idev);
int index, mode;
mode = scancode >> 8;
if (mode > ATI_REMOTE2_PC || !((1 << mode) & mode_mask))
return -EINVAL;
index = ati_remote2_lookup(scancode & 0xFF);
if (index < 0)
return -EINVAL;
*keycode = ar2->keycode[mode][index];
return 0;
}
static int ati_remote2_setkeycode(struct input_dev *idev, int scancode, int keycode)
{
struct ati_remote2 *ar2 = input_get_drvdata(idev);
int index, mode, old_keycode;
mode = scancode >> 8;
if (mode > ATI_REMOTE2_PC || !((1 << mode) & mode_mask))
return -EINVAL;
index = ati_remote2_lookup(scancode & 0xFF);
if (index < 0)
return -EINVAL;
if (keycode < KEY_RESERVED || keycode > KEY_MAX)
return -EINVAL;
old_keycode = ar2->keycode[mode][index];
ar2->keycode[mode][index] = keycode;
set_bit(keycode, idev->keybit);
for (mode = 0; mode < ATI_REMOTE2_MODES; mode++) {
for (index = 0; index < ARRAY_SIZE(ati_remote2_key_table); index++) {
if (ar2->keycode[mode][index] == old_keycode)
return 0;
}
}
clear_bit(old_keycode, idev->keybit);
return 0;
}
static int ati_remote2_input_init(struct ati_remote2 *ar2)
{
struct input_dev *idev;
int i, retval;
int index, mode, retval;
idev = input_allocate_device();
if (!idev)
......@@ -350,8 +401,26 @@ static int ati_remote2_input_init(struct ati_remote2 *ar2)
idev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) |
BIT_MASK(BTN_RIGHT);
idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++)
set_bit(ati_remote2_key_table[i].key_code, idev->keybit);
for (mode = 0; mode < ATI_REMOTE2_MODES; mode++) {
for (index = 0; index < ARRAY_SIZE(ati_remote2_key_table); index++) {
ar2->keycode[mode][index] = ati_remote2_key_table[index].keycode;
set_bit(ar2->keycode[mode][index], idev->keybit);
}
}
/* AUX1-AUX4 and PC generate the same scancode. */
index = ati_remote2_lookup(0x3f);
ar2->keycode[ATI_REMOTE2_AUX1][index] = KEY_PROG1;
ar2->keycode[ATI_REMOTE2_AUX2][index] = KEY_PROG2;
ar2->keycode[ATI_REMOTE2_AUX3][index] = KEY_PROG3;
ar2->keycode[ATI_REMOTE2_AUX4][index] = KEY_PROG4;
ar2->keycode[ATI_REMOTE2_PC][index] = KEY_PC;
set_bit(KEY_PROG1, idev->keybit);
set_bit(KEY_PROG2, idev->keybit);
set_bit(KEY_PROG3, idev->keybit);
set_bit(KEY_PROG4, idev->keybit);
set_bit(KEY_PC, idev->keybit);
idev->rep[REP_DELAY] = 250;
idev->rep[REP_PERIOD] = 33;
......@@ -359,6 +428,9 @@ static int ati_remote2_input_init(struct ati_remote2 *ar2)
idev->open = ati_remote2_open;
idev->close = ati_remote2_close;
idev->getkeycode = ati_remote2_getkeycode;
idev->setkeycode = ati_remote2_setkeycode;
idev->name = ar2->name;
idev->phys = ar2->phys;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment