Commit 19771622 authored by Masahiro Yamada's avatar Masahiro Yamada Committed by Stephen Boyd

clk: uniphier: add NAND clock for all UniPhier SoCs

Add clock line for the Denali NAND controller.
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: default avatarStephen Boyd <sboyd@codeaurora.org>
parent 2fbae64a
......@@ -29,6 +29,12 @@
UNIPHIER_CLK_FACTOR("sd-200m", -1, "spll", 1, 10), \
UNIPHIER_CLK_FACTOR("sd-133m", -1, "spll", 1, 15)
#define UNIPHIER_SLD3_SYS_CLK_NAND(idx) \
UNIPHIER_CLK_GATE("nand", (idx), NULL, 0x2104, 2)
#define UNIPHIER_LD11_SYS_CLK_NAND(idx) \
UNIPHIER_CLK_GATE("nand", (idx), NULL, 0x210c, 0)
#define UNIPHIER_SLD3_SYS_CLK_STDMAC(idx) \
UNIPHIER_CLK_GATE("stdmac", (idx), NULL, 0x2104, 10)
......@@ -48,6 +54,7 @@ const struct uniphier_clk_data uniphier_sld3_sys_clk_data[] = {
UNIPHIER_CLK_FACTOR("vpll27a", -1, "ref", 5625, 512), /* 270 MHz */
UNIPHIER_CLK_FACTOR("uart", 0, "a2pll", 1, 16),
UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 16),
UNIPHIER_SLD3_SYS_CLK_NAND(2),
UNIPHIER_SLD3_SYS_CLK_SD,
UNIPHIER_CLK_FACTOR("usb2", -1, "upll", 1, 12),
UNIPHIER_SLD3_SYS_CLK_STDMAC(8),
......@@ -61,6 +68,7 @@ const struct uniphier_clk_data uniphier_ld4_sys_clk_data[] = {
UNIPHIER_CLK_FACTOR("vpll27a", -1, "ref", 5625, 512), /* 270 MHz */
UNIPHIER_CLK_FACTOR("uart", 0, "a2pll", 1, 16),
UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 16),
UNIPHIER_SLD3_SYS_CLK_NAND(2),
UNIPHIER_SLD3_SYS_CLK_SD,
UNIPHIER_CLK_FACTOR("usb2", -1, "upll", 1, 12),
UNIPHIER_SLD3_SYS_CLK_STDMAC(8), /* Ether, HSC, MIO */
......@@ -74,6 +82,7 @@ const struct uniphier_clk_data uniphier_pro4_sys_clk_data[] = {
UNIPHIER_CLK_FACTOR("vpll27a", -1, "ref", 270, 25), /* 270 MHz */
UNIPHIER_CLK_FACTOR("uart", 0, "a2pll", 1, 8),
UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 32),
UNIPHIER_SLD3_SYS_CLK_NAND(2),
UNIPHIER_SLD3_SYS_CLK_SD,
UNIPHIER_CLK_FACTOR("usb2", -1, "upll", 1, 12),
UNIPHIER_SLD3_SYS_CLK_STDMAC(8), /* HSC, MIO, RLE */
......@@ -89,6 +98,7 @@ const struct uniphier_clk_data uniphier_sld8_sys_clk_data[] = {
UNIPHIER_CLK_FACTOR("vpll27a", -1, "ref", 270, 25), /* 270 MHz */
UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 20),
UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 16),
UNIPHIER_SLD3_SYS_CLK_NAND(2),
UNIPHIER_SLD3_SYS_CLK_SD,
UNIPHIER_CLK_FACTOR("usb2", -1, "upll", 1, 12),
UNIPHIER_SLD3_SYS_CLK_STDMAC(8), /* Ether, HSC, MIO */
......@@ -101,6 +111,7 @@ const struct uniphier_clk_data uniphier_pro5_sys_clk_data[] = {
UNIPHIER_CLK_FACTOR("dapll2", -1, "ref", 144, 125), /* 2949.12 MHz */
UNIPHIER_CLK_FACTOR("uart", 0, "dapll2", 1, 40),
UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 48),
UNIPHIER_SLD3_SYS_CLK_NAND(2),
UNIPHIER_PRO5_SYS_CLK_SD,
UNIPHIER_SLD3_SYS_CLK_STDMAC(8), /* HSC */
UNIPHIER_PRO4_SYS_CLK_GIO(12), /* PCIe, USB3 */
......@@ -113,6 +124,7 @@ const struct uniphier_clk_data uniphier_pxs2_sys_clk_data[] = {
UNIPHIER_CLK_FACTOR("spll", -1, "ref", 96, 1), /* 2400 MHz */
UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 27),
UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 48),
UNIPHIER_SLD3_SYS_CLK_NAND(2),
UNIPHIER_PRO5_SYS_CLK_SD,
UNIPHIER_SLD3_SYS_CLK_STDMAC(8), /* HSC, RLE */
/* GIO is always clock-enabled: no function for 0x2104 bit6 */
......@@ -131,6 +143,7 @@ const struct uniphier_clk_data uniphier_ld11_sys_clk_data[] = {
UNIPHIER_CLK_FACTOR("vspll", -1, "ref", 80, 1), /* 2000 MHz */
UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 34),
UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 40),
UNIPHIER_LD11_SYS_CLK_NAND(2),
UNIPHIER_LD11_SYS_CLK_STDMAC(8), /* HSC, MIO */
UNIPHIER_CLK_FACTOR("usb2", -1, "ref", 24, 25),
/* CPU gears */
......@@ -156,6 +169,7 @@ const struct uniphier_clk_data uniphier_ld20_sys_clk_data[] = {
UNIPHIER_CLK_FACTOR("vppll", -1, "ref", 504, 5), /* 2520 MHz */
UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 34),
UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 40),
UNIPHIER_LD11_SYS_CLK_NAND(2),
UNIPHIER_LD20_SYS_CLK_SD,
UNIPHIER_LD11_SYS_CLK_STDMAC(8), /* HSC */
/* GIO is always clock-enabled: no function for 0x210c bit5 */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment