Skip to content

L
linux
Commit 198231a8 authored by Martin Dalecki's avatar Martin Dalecki Committed by Linus Torvalds
Browse files
Options

[PATCH] 2.5.7-pre2 IDE 22a 

- Apply more patches from Vojtech Pavlik for the handling of host chip setup.
   Hopefully they are settled now.

- Kill unused CONFIG_BLK_DEV_MODES

- Push register addressing down in to task_vlb_sync.

- Make the taskfile parsing stuff actually readable. This is compressing the
   code by an incredible amount. We use just one function doing the whole
   scanning right now. This should make sure that the IRQ handler used by a
   particular command is always right.  I didn't introduce typos hopefully
   here.

- Don't call ide_handler_parser as argument for do_taskfile() any longer. We
   have killed this function by coalescing it's functionality with
   ide_cmd_type_parser() anyway.

- Kill unused SLC90E66 code, which Vojtech apparently missed in his patch.

- sync up with 2.5.7-pre2

Once again the actual patch is rather big mostly due to the removal of
some default configuration variables which are not used anylonger. So time for
the next patch stage.
parent ed0e83f5
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 768 additions and 1259 deletions
arch/alpha/config.in
View file @ 198231a8
......@@ -290,7 +290,6 @@ tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
if [ "$CONFIG_IDE" != "n" ]; then
source drivers/ide/Config.in
else
define_bool CONFIG_BLK_DEV_IDE_MODES n
define_bool CONFIG_BLK_DEV_HD n
fi
endmenu
......
arch/alpha/defconfig
View file @ 198231a8
......@@ -274,7 +274,6 @@ CONFIG_BLK_DEV_CY82C693=y
# CONFIG_PDC202XX_FORCE is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
......
arch/arm/config.in
View file @ 198231a8
......@@ -564,7 +564,6 @@ tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
if [ "$CONFIG_IDE" != "n" ]; then
source drivers/ide/Config.in
else
define_bool CONFIG_BLK_DEV_IDE_MODES n
define_bool CONFIG_BLK_DEV_HD n
fi
endmenu
......
arch/arm/def-configs/footbridge
View file @ 198231a8
......@@ -429,7 +429,6 @@ CONFIG_BLK_DEV_PDC202XX=y
# CONFIG_PDC202XX_BURST is not set
# CONFIG_BLK_DEV_OSB4 is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_SL82C105=y
......
arch/arm/def-configs/iq80310
View file @ 198231a8
......@@ -478,7 +478,6 @@ CONFIG_BLK_DEV_CMD64X=y
# CONFIG_PDC202XX_FORCE is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_SL82C105 is not set
......
arch/cris/config.in
View file @ 198231a8
......@@ -149,7 +149,6 @@ tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
if [ "$CONFIG_IDE" != "n" ]; then
source drivers/ide/Config.in
else
define_bool CONFIG_BLK_DEV_IDE_MODES n
define_bool CONFIG_BLK_DEV_HD n
fi
endmenu
......
arch/i386/config.in
View file @ 198231a8
......@@ -305,7 +305,6 @@ tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
if [ "$CONFIG_IDE" != "n" ]; then
source drivers/ide/Config.in
else
define_bool CONFIG_BLK_DEV_IDE_MODES n
define_bool CONFIG_BLK_DEV_HD n
fi
endmenu
......
arch/i386/defconfig
View file @ 198231a8
......@@ -285,7 +285,6 @@ CONFIG_PIIX_TUNING=y
# CONFIG_PDC202XX_FORCE is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
......
arch/ia64/config.in
View file @ 198231a8
......@@ -131,7 +131,6 @@ tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
if [ "$CONFIG_IDE" != "n" ]; then
source drivers/ide/Config.in
else
define_bool CONFIG_BLK_DEV_IDE_MODES n
define_bool CONFIG_BLK_DEV_HD n
fi
endmenu
......
arch/ia64/defconfig
View file @ 198231a8
......@@ -248,7 +248,6 @@ CONFIG_BLK_DEV_PIIX=y
# CONFIG_PDC202XX_FORCE is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
......
arch/ia64/sn/configs/sn1/defconfig-bigsur-mp
View file @ 198231a8
......@@ -235,7 +235,6 @@ CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_PDC202XX_FORCE is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
......
arch/ia64/sn/configs/sn1/defconfig-bigsur-sp
View file @ 198231a8
......@@ -235,7 +235,6 @@ CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_PDC202XX_FORCE is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
......
arch/m68k/config.in
View file @ 198231a8
......@@ -161,7 +161,6 @@ tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
if [ "$CONFIG_IDE" != "n" ]; then
source drivers/ide/Config.in
else
define_bool CONFIG_BLK_DEV_IDE_MODES n
define_bool CONFIG_BLK_DEV_HD n
fi
endmenu
......
arch/mips/config.in
View file @ 198231a8
......@@ -350,7 +350,6 @@ if [ "$CONFIG_SGI_IP22" != "y" -a \
if [ "$CONFIG_IDE" != "n" ]; then
source drivers/ide/Config.in
else
define_bool CONFIG_BLK_DEV_IDE_MODES n
define_bool CONFIG_BLK_DEV_HD n
fi
endmenu
......
arch/mips/defconfig-ddb5476
View file @ 198231a8
......@@ -248,7 +248,6 @@ CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_PDC202XX_FORCE is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
......
arch/mips/defconfig-it8172
View file @ 198231a8
......@@ -317,7 +317,6 @@ CONFIG_IT8172_TUNING=y
# CONFIG_PDC202XX_FORCE is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_IDE_CHIPSETS=y
......
arch/mips64/config.in
View file @ 198231a8
......@@ -147,7 +147,6 @@ tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
if [ "$CONFIG_IDE" != "n" ]; then
source drivers/ide/Config.in
else
define_bool CONFIG_BLK_DEV_IDE_MODES n
define_bool CONFIG_BLK_DEV_HD n
fi
endmenu
......
arch/ppc/config.in
View file @ 198231a8
......@@ -425,7 +425,6 @@ tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
if [ "$CONFIG_IDE" != "n" ]; then
source drivers/ide/Config.in
else
define_bool CONFIG_BLK_DEV_IDE_MODES n
define_bool CONFIG_BLK_DEV_HD n
fi
endmenu
......
arch/ppc/configs/common_defconfig
View file @ 198231a8
......@@ -276,7 +276,6 @@ CONFIG_BLK_DEV_CMD64X=y
# CONFIG_PDC202XX_FORCE is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_SL82C105=y
......
arch/ppc/configs/k2_defconfig
View file @ 198231a8
......@@ -259,7 +259,6 @@ CONFIG_BLK_DEV_ALI15X3=y
# CONFIG_PDC202XX_FORCE is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_SL82C105 is not set
......
arch/ppc/configs/menf1_defconfig
View file @ 198231a8
......@@ -263,7 +263,6 @@ CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_PDC202XX_FORCE is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_SL82C105 is not set
......
arch/ppc/configs/mvme5100_defconfig
View file @ 198231a8
......@@ -256,7 +256,6 @@ CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_PDC202XX_BURST is not set
# CONFIG_BLK_DEV_OSB4 is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_SL82C105 is not set
......
arch/ppc/configs/pmac_defconfig
View file @ 198231a8
......@@ -266,7 +266,6 @@ CONFIG_BLK_DEV_CMD64X=y
# CONFIG_PDC202XX_FORCE is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_SL82C105=y
......
arch/ppc/configs/pplus_defconfig
View file @ 198231a8
......@@ -270,7 +270,6 @@ CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_PDC202XX_FORCE is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_BLK_DEV_SL82C105=y
......
arch/ppc/configs/sandpoint_defconfig
View file @ 198231a8
......@@ -233,7 +233,6 @@ CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_PDC202XX_FORCE is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_SL82C105=y
......
arch/ppc/defconfig
View file @ 198231a8
......@@ -276,7 +276,6 @@ CONFIG_BLK_DEV_CMD64X=y
# CONFIG_PDC202XX_FORCE is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_SL82C105=y
......
arch/ppc64/config.in
View file @ 198231a8
......@@ -92,7 +92,6 @@ tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
if [ "$CONFIG_IDE" != "n" ]; then
source drivers/ide/Config.in
else
define_bool CONFIG_BLK_DEV_IDE_MODES n
define_bool CONFIG_BLK_DEV_HD n
fi
endmenu
......
arch/sh/config.in
View file @ 198231a8
......@@ -218,7 +218,6 @@ tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
if [ "$CONFIG_IDE" != "n" ]; then
source drivers/ide/Config.in
else
define_bool CONFIG_BLK_DEV_IDE_MODES n
define_bool CONFIG_BLK_DEV_HD n
fi
endmenu
......
arch/sparc/config.in
View file @ 198231a8
......@@ -110,14 +110,11 @@ if [ "$CONFIG_PCI" = "y" ]; then
if [ "$CONFIG_IDE" != "n" ]; then
source drivers/ide/Config.in
else
define_bool CONFIG_BLK_DEV_IDE_MODES n
define_bool CONFIG_BLK_DEV_HD n
fi
endmenu
else
define_bool CONFIG_IDE n
define_bool CONFIG_BLK_DEV_IDE_MODES n
define_bool CONFIG_BLK_DEV_HD n
fi
......
arch/sparc64/config.in
View file @ 198231a8
......@@ -112,7 +112,6 @@ tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
if [ "$CONFIG_IDE" != "n" ]; then
source drivers/ide/Config.in
else
define_bool CONFIG_BLK_DEV_IDE_MODES n
define_bool CONFIG_BLK_DEV_HD n
fi
endmenu
......
arch/sparc64/defconfig
View file @ 198231a8
......@@ -311,7 +311,6 @@ CONFIG_BLK_DEV_NS87415=y
# CONFIG_PDC202XX_FORCE is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
......
arch/x86_64/config.in
View file @ 198231a8
......@@ -122,7 +122,6 @@ tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
if [ "$CONFIG_IDE" != "n" ]; then
source drivers/ide/Config.in
else
define_bool CONFIG_BLK_DEV_IDE_MODES n
define_bool CONFIG_BLK_DEV_HD n
fi
endmenu
......
drivers/ide/Config.help
View file @ 198231a8
......@@ -352,19 +352,10 @@ CONFIG_WDC_ALI15X3
SAY N!
CONFIG_BLK_DEV_AMD74XX
This driver ensures (U)DMA support for the AMD756/760 Viper
chipsets.
If you say Y here, you also need to say Y to "Use DMA by default
when available", above.
Please read the comments at the top of <file:drivers/ide/amd74xx.c>.
If unsure, say N.
CONFIG_AMD74XX_OVERRIDE
This option auto-forces the ata66 flag.
This effect can be also invoked by calling "idex=ata66"
If unsure, say N.
This driver adds explicit support for AMD-7xx and AMD-8111 chips
and also for the nVidia nForce chip. This allows the kernel to
change PIO, DMA and UDMA speeds and to configure the chip to
optimum performance.
CONFIG_BLK_DEV_CMD64X
Say Y here if you have an IDE controller which uses any of these
......@@ -435,28 +426,10 @@ CONFIG_BLK_DEV_SVWKS
chipsets.
CONFIG_BLK_DEV_PIIX
This driver adds PIO mode setting and tuning for all PIIX IDE
controllers by Intel. Since the BIOS can sometimes improperly tune
PIO 0-4 mode settings, this allows dynamic tuning of the chipset
via the standard end-user tool 'hdparm'.
Please read the comments at the top of <file:drivers/ide/piix.c>.
If you say Y here, you should also say Y to "PIIXn Tuning support",
below.
If unsure, say N.
CONFIG_PIIX_TUNING
This driver extension adds DMA mode setting and tuning for all PIIX
IDE controllers by Intel. Since the BIOS can sometimes improperly
set up the device/adapter combination and speed limits, it has
become a necessity to back/forward speed devices as needed.
Case 430HX/440FX PIIX3 need speed limits to reduce UDMA to DMA mode
2 if the BIOS can not perform this task at initialization.
If unsure, say N.
This driver adds explicit support for Intel PIIX and ICH chips
and also for the Efar Victory66 (slc90e66) chip. This allows
the kernel to change PIO, DMA and UDMA speeds and to configure
the chip to optimum performance.
CONFIG_BLK_DEV_PDC202XX
Promise Ultra33 or PDC20246
......@@ -513,19 +486,6 @@ CONFIG_BLK_DEV_SIS5513
Please read the comments at the top of <file:drivers/ide/sis5513.c>.
CONFIG_BLK_DEV_SLC90E66
This driver ensures (U)DMA support for Victroy66 SouthBridges for
SMsC with Intel NorthBridges. This is an Ultra66 based chipset.
The nice thing about it is that you can mix Ultra/DMA/PIO devices
and it will handle timing cycles. Since this is an improved
look-a-like to the PIIX4 it should be a nice addition.
If you say Y here, you need to say Y to "Use DMA by default when
available" as well.
Please read the comments at the top of
<file:drivers/ide/slc90e66.c>.
CONFIG_BLK_DEV_SL82C105
If you have a Winbond SL82c105 IDE controller, say Y here to enable
special configuration for this chip. This is common on various CHRP
......@@ -538,20 +498,9 @@ CONFIG_BLK_DEV_TRM290
Please read the comments at the top of <file:drivers/ide/trm290.c>.
CONFIG_BLK_DEV_VIA82CXXX
This allows you to configure your chipset for a better use while
running PIO/(U)DMA, it will allow you to enable efficiently the
second channel dma usage, as it may not be set by BIOS. It will try
to set fifo configuration at its best. It will allow you to get
information from /proc/ide/via provided you enabled "/proc file
system" support.
Please read the comments at the top of
<file:drivers/ide/via82cxxx.c>.
If you say Y here, then say Y to "Use DMA by default when available"
as well.
If unsure, say N.
This driver adds explicit support for VIA BusMastering IDE chips.
This allows the kernel to change PIO, DMA and UDMA speeds and to
configure the chip to optimum performance.
CONFIG_BLK_DEV_IDE_RAPIDE
Say Y here if you want to support the Yellowstone RapIDE controller
......
drivers/ide/Config.in
View file @ 198231a8
......@@ -53,18 +53,14 @@ if [ "$CONFIG_BLK_DEV_IDE" != "n" ]; then
dep_mbool ' AEC62XX Tuning support' CONFIG_AEC62XX_TUNING $CONFIG_BLK_DEV_AEC62XX
dep_bool ' ALI M15x3 chipset support' CONFIG_BLK_DEV_ALI15X3 $CONFIG_BLK_DEV_IDEDMA_PCI
dep_mbool ' ALI M15x3 WDC support (DANGEROUS)' CONFIG_WDC_ALI15X3 $CONFIG_BLK_DEV_ALI15X3
dep_bool ' AMD Viper support' CONFIG_BLK_DEV_AMD74XX $CONFIG_BLK_DEV_IDEDMA_PCI
dep_mbool ' AMD Viper ATA-66 Override (WIP)' CONFIG_AMD74XX_OVERRIDE $CONFIG_BLK_DEV_AMD74XX $CONFIG_IDEDMA_PCI_WIP
dep_bool ' AMD and nVidia chipset support' CONFIG_BLK_DEV_AMD74XX $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' CMD64X chipset support' CONFIG_BLK_DEV_CMD64X $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' CY82C693 chipset support' CONFIG_BLK_DEV_CY82C693 $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' Cyrix CS5530 MediaGX chipset support' CONFIG_BLK_DEV_CS5530 $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' HPT34X chipset support' CONFIG_BLK_DEV_HPT34X $CONFIG_BLK_DEV_IDEDMA_PCI
dep_mbool ' HPT34X AUTODMA support (WIP)' CONFIG_HPT34X_AUTODMA $CONFIG_BLK_DEV_HPT34X $CONFIG_IDEDMA_PCI_WIP
dep_bool ' HPT366 chipset support' CONFIG_BLK_DEV_HPT366 $CONFIG_BLK_DEV_IDEDMA_PCI
if [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" ]; then
dep_mbool ' Intel PIIXn chipsets support' CONFIG_BLK_DEV_PIIX $CONFIG_BLK_DEV_IDEDMA_PCI
dep_mbool ' PIIXn Tuning support' CONFIG_PIIX_TUNING $CONFIG_BLK_DEV_PIIX $CONFIG_IDEDMA_PCI_AUTO
fi
dep_bool ' Intel and Efar (SMsC) chipset support' CONFIG_BLK_DEV_PIIX $CONFIG_BLK_DEV_IDEDMA_PCI
if [ "$CONFIG_MIPS_ITE8172" = "y" -o "$CONFIG_MIPS_IVR" = "y" ]; then
dep_mbool ' IT8172 IDE support' CONFIG_BLK_DEV_IT8172 $CONFIG_BLK_DEV_IDEDMA_PCI
dep_mbool ' IT8172 IDE Tuning support' CONFIG_IT8172_TUNING $CONFIG_BLK_DEV_IT8172 $CONFIG_IDEDMA_PCI_AUTO
......@@ -77,9 +73,8 @@ if [ "$CONFIG_BLK_DEV_IDE" != "n" ]; then
dep_bool ' Special FastTrak Feature' CONFIG_PDC202XX_FORCE $CONFIG_BLK_DEV_PDC202XX
dep_bool ' ServerWorks OSB4/CSB5 chipsets support' CONFIG_BLK_DEV_SVWKS $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_X86
dep_bool ' SiS5513 chipset support' CONFIG_BLK_DEV_SIS5513 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_X86
dep_bool ' SLC90E66 chipset support' CONFIG_BLK_DEV_SLC90E66 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_X86
dep_bool ' Tekram TRM290 chipset support (EXPERIMENTAL)' CONFIG_BLK_DEV_TRM290 $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' VIA82CXXX chipset support' CONFIG_BLK_DEV_VIA82CXXX $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' VIA chipset support' CONFIG_BLK_DEV_VIA82CXXX $CONFIG_BLK_DEV_IDEDMA_PCI
fi
if [ "$CONFIG_PPC" = "y" -o "$CONFIG_ARM" = "y" ]; then
......@@ -167,32 +162,6 @@ else
define_bool CONFIG_DMA_NONPCI n
fi
if [ "$CONFIG_IDE_CHIPSETS" = "y" -o \
"$CONFIG_BLK_DEV_AEC62XX" = "y" -o \
"$CONFIG_BLK_DEV_ALI15X3" = "y" -o \
"$CONFIG_BLK_DEV_AMD74XX" = "y" -o \
"$CONFIG_BLK_DEV_CMD640" = "y" -o \
"$CONFIG_BLK_DEV_CMD64X" = "y" -o \
"$CONFIG_BLK_DEV_CS5530" = "y" -o \
"$CONFIG_BLK_DEV_CY82C693" = "y" -o \
"$CONFIG_BLK_DEV_HPT34X" = "y" -o \
"$CONFIG_BLK_DEV_HPT366" = "y" -o \
"$CONFIG_BLK_DEV_IDE_PMAC" = "y" -o \
"$CONFIG_BLK_DEV_OPTI621" = "y" -o \
"$CONFIG_BLK_DEV_SVWKS" = "y" -o \
"$CONFIG_BLK_DEV_PDC202XX" = "y" -o \
"$CONFIG_BLK_DEV_PIIX" = "y" -o \
"$CONFIG_BLK_DEV_IT8172" = "y" -o \
"$CONFIG_BLK_DEV_SIS5513" = "y" -o \
"$CONFIG_BLK_DEV_SLC90E66" = "y" -o \
"$CONFIG_BLK_DEV_SL82C105" = "y" -o \
"$CONFIG_BLK_DEV_VIA82CXXX" = "y" -o \
"$CONFIG_BLK_DEV_MPC8xx_IDE" = "y" ]; then
define_bool CONFIG_BLK_DEV_IDE_MODES y
else
define_bool CONFIG_BLK_DEV_IDE_MODES n
fi
dep_tristate 'Support for IDE Raid controllers' CONFIG_BLK_DEV_ATARAID $CONFIG_BLK_DEV_IDE $CONFIG_EXPERIMENTAL
dep_tristate ' Support Promise software RAID (Fasttrak(tm))' CONFIG_BLK_DEV_ATARAID_PDC $CONFIG_BLK_DEV_IDE $CONFIG_EXPERIMENTAL $CONFIG_BLK_DEV_ATARAID
dep_tristate ' Highpoint 370 software RAID' CONFIG_BLK_DEV_ATARAID_HPT $CONFIG_BLK_DEV_IDE $CONFIG_EXPERIMENTAL $CONFIG_BLK_DEV_ATARAID
......
drivers/ide/Makefile
View file @ 198231a8
......@@ -60,7 +60,6 @@ ide-obj-$(CONFIG_BLK_DEV_QD65XX) += qd65xx.o
ide-obj-$(CONFIG_BLK_DEV_IDE_RAPIDE) += rapide.o
ide-obj-$(CONFIG_BLK_DEV_RZ1000) += rz1000.o
ide-obj-$(CONFIG_BLK_DEV_SIS5513) += sis5513.o
ide-obj-$(CONFIG_BLK_DEV_SLC90E66) += slc90e66.o
ide-obj-$(CONFIG_BLK_DEV_SL82C105) += sl82c105.o
ide-obj-$(CONFIG_BLK_DEV_TRM290) += trm290.o
ide-obj-$(CONFIG_BLK_DEV_UMC8672) += umc8672.o
......
drivers/ide/amd74xx.c
View file @ 198231a8
/*
* $Id: amd74xx.c,v 2.7 2002/09/01 17:37:00 vojtech Exp $
* $Id: amd74xx.c,v 2.8 2002/03/14 11:52:20 vojtech Exp $
*
* Copyright (c) 2000-2002 Vojtech Pavlik
*
......@@ -46,13 +46,13 @@
#include "ata-timing.h"
#define AMD_IDE_ENABLE 0x40
#define AMD_IDE_CONFIG 0x41
#define AMD_CABLE_DETECT 0x42
#define AMD_DRIVE_TIMING 0x48
#define AMD_8BIT_TIMING 0x4e
#define AMD_ADDRESS_SETUP 0x4c
#define AMD_UDMA_TIMING 0x50
#define AMD_IDE_ENABLE (0x00 + amd_config->base)
#define AMD_IDE_CONFIG (0x01 + amd_config->base)
#define AMD_CABLE_DETECT (0x02 + amd_config->base)
#define AMD_DRIVE_TIMING (0x08 + amd_config->base)
#define AMD_8BIT_TIMING (0x0e + amd_config->base)
#define AMD_ADDRESS_SETUP (0x0c + amd_config->base)
#define AMD_UDMA_TIMING (0x10 + amd_config->base)
#define AMD_UDMA 0x07
#define AMD_UDMA_33 0x01
......@@ -66,18 +66,19 @@
*/
static struct amd_ide_chip {
char *name;
unsigned short id;
unsigned char rev;
unsigned int base;
unsigned char flags;
} amd_ide_chips[] = {
{ "8111", PCI_DEVICE_ID_AMD_8111_IDE, 0x00, AMD_UDMA_100 },
{ "768 Opus", PCI_DEVICE_ID_AMD_OPUS_7441, 0x00, AMD_UDMA_100 },
{ "766 Viper", PCI_DEVICE_ID_AMD_VIPER_7411, 0x00, AMD_UDMA_100 | AMD_BAD_FIFO },
{ "756/c4+ Viper", PCI_DEVICE_ID_AMD_VIPER_7409, 0x07, AMD_UDMA_66 },
{ "756 Viper", PCI_DEVICE_ID_AMD_VIPER_7409, 0x00, AMD_UDMA_66 | AMD_BAD_SWDMA },
{ "755 Cobra", PCI_DEVICE_ID_AMD_COBRA_7401, 0x00, AMD_UDMA_33 | AMD_BAD_SWDMA },
{ NULL }
{ PCI_DEVICE_ID_AMD_8111_IDE, 0x00, 0x40, AMD_UDMA_100 }, /* AMD-8111 */
{ PCI_DEVICE_ID_AMD_OPUS_7441, 0x00, 0x40, AMD_UDMA_100 }, /* AMD-768 Opus */
{ PCI_DEVICE_ID_AMD_VIPER_7411, 0x00, 0x40, AMD_UDMA_100 | AMD_BAD_FIFO }, /* AMD-766 Viper */
{ PCI_DEVICE_ID_AMD_VIPER_7409, 0x07, 0x40, AMD_UDMA_66 }, /* AMD-756/c4+ Viper */
{ PCI_DEVICE_ID_AMD_VIPER_7409, 0x00, 0x40, AMD_UDMA_66 | AMD_BAD_SWDMA }, /* AMD-756 Viper */
{ PCI_DEVICE_ID_AMD_COBRA_7401, 0x00, 0x40, AMD_UDMA_33 | AMD_BAD_SWDMA }, /* AMD-755 Cobra */
{ PCI_DEVICE_ID_NVIDIA_NFORCE_IDE, 0x00, 0x50, AMD_UDMA_100 }, /* nVidia nForce */
{ 0 }
};
static struct amd_ide_chip *amd_config;
......@@ -119,8 +120,8 @@ static int amd_get_info(char *buffer, char **addr, off_t offset, int count)
amd_print("----------AMD BusMastering IDE Configuration----------------");
amd_print("Driver Version: 2.7");
amd_print("South Bridge: AMD-%s", amd_config->name);
amd_print("Driver Version: 2.8");
amd_print("South Bridge: %s", bmide_dev->name);
pci_read_config_byte(dev, PCI_REVISION_ID, &t);
amd_print("Revision: IDE %#x", t);
......@@ -389,8 +390,8 @@ unsigned int __init pci_init_amd74xx(struct pci_dev *dev, const char *name)
*/
pci_read_config_byte(dev, PCI_REVISION_ID, &t);
printk(KERN_INFO "AMD_IDE: AMD-%s (rev %02x) IDE %s controller on pci%s\n",
amd_config->name, t, amd_dma[amd_config->flags & AMD_UDMA], dev->slot_name);
printk(KERN_INFO "AMD_IDE: %s (rev %02x) %s controller on pci%s\n",
dev->name, t, amd_dma[amd_config->flags & AMD_UDMA], dev->slot_name);
/*
* Register /proc/ide/amd74xx entry
......
drivers/ide/ide-disk.c
View file @ 198231a8
......@@ -106,40 +106,51 @@ static int lba_capacity_is_ok (struct hd_driveid *id)
return 0; /* lba_capacity value may be bad */
}
static ide_startstop_t chs_rw_disk (ide_drive_t *drive, struct request *rq, unsigned long block);
static ide_startstop_t lba_28_rw_disk (ide_drive_t *drive, struct request *rq, unsigned long block);
static ide_startstop_t lba_48_rw_disk (ide_drive_t *drive, struct request *rq, unsigned long long block);
static ide_startstop_t chs_do_request(ide_drive_t *drive, struct request *rq, unsigned long block);
static ide_startstop_t lba28_do_request(ide_drive_t *drive, struct request *rq, unsigned long block);
static ide_startstop_t lba48_do_request(ide_drive_t *drive, struct request *rq, unsigned long long block);
/*
* do_rw_disk() issues READ and WRITE commands to a disk,
* using LBA if supported, or CHS otherwise, to address sectors.
* It also takes care of issuing special DRIVE_CMDs.
* Issue a READ or WRITE command to a disk, using LBA if supported, or CHS
* otherwise, to address sectors. It also takes care of issuing special
* DRIVE_CMDs.
*/
static ide_startstop_t do_rw_disk (ide_drive_t *drive, struct request *rq, unsigned long block)
static ide_startstop_t idedisk_do_request(ide_drive_t *drive, struct request *rq, unsigned long block)
{
if (drive->blocked)
panic("ide: Request while drive blocked? You don't like your data intact?");
/*
* Wait until all request have bin finished.
*/
while (drive->blocked) {
yield();
// panic("ide: Request while drive blocked?");
}
if (!(rq->flags & REQ_CMD)) {
blk_dump_rq_flags(rq, "do_rw_disk, bad command");
blk_dump_rq_flags(rq, "idedisk_do_request - bad command");
ide_end_request(drive, 0);
return ide_stopped;
}
if (IS_PDC4030_DRIVE) {
extern ide_startstop_t promise_rw_disk(ide_drive_t *, struct request *, unsigned long);
return promise_rw_disk(drive, rq, block);
}
if ((drive->id->cfs_enable_2 & 0x0400) && (drive->addressing)) /* 48-bit LBA */
return lba_48_rw_disk(drive, rq, block);
if (drive->select.b.lba) /* 28-bit LBA */
return lba_28_rw_disk(drive, rq, block);
/* 48-bit LBA */
if ((drive->id->cfs_enable_2 & 0x0400) && (drive->addressing))
return lba48_do_request(drive, rq, block);
/* 28-bit LBA */
if (drive->select.b.lba)
return lba28_do_request(drive, rq, block);
/* 28-bit CHS : DIE DIE DIE piece of legacy crap!!! */
return chs_rw_disk(drive, rq, block);
/* 28-bit CHS */
return chs_do_request(drive, rq, block);
}
static task_ioreg_t get_command (ide_drive_t *drive, int cmd)
static task_ioreg_t get_command(ide_drive_t *drive, int cmd)
{
int lba48bit = (drive->id->cfs_enable_2 & 0x0400) ? 1 : 0;
......@@ -147,23 +158,25 @@ static task_ioreg_t get_command (ide_drive_t *drive, int cmd)
lba48bit = drive->addressing;
#endif
if ((cmd == READ) && (drive->using_dma))
return (lba48bit) ? WIN_READDMA_EXT : WIN_READDMA;
else if ((cmd == READ) && (drive->mult_count))
return (lba48bit) ? WIN_MULTREAD_EXT : WIN_MULTREAD;
else if (cmd == READ)
return (lba48bit) ? WIN_READ_EXT : WIN_READ;
else if ((cmd == WRITE) && (drive->using_dma))
return (lba48bit) ? WIN_WRITEDMA_EXT : WIN_WRITEDMA;
else if ((cmd == WRITE) && (drive->mult_count))
return (lba48bit) ? WIN_MULTWRITE_EXT : WIN_MULTWRITE;
else if (cmd == WRITE)
return (lba48bit) ? WIN_WRITE_EXT : WIN_WRITE;
else
return WIN_NOP;
if (cmd == READ) {
if (drive->using_dma)
return (lba48bit) ? WIN_READDMA_EXT : WIN_READDMA;
else if (drive->mult_count)
return (lba48bit) ? WIN_MULTREAD_EXT : WIN_MULTREAD;
else
return (lba48bit) ? WIN_READ_EXT : WIN_READ;
} else if (cmd == WRITE) {
if (drive->using_dma)
return (lba48bit) ? WIN_WRITEDMA_EXT : WIN_WRITEDMA;
else if (drive->mult_count)
return (lba48bit) ? WIN_MULTWRITE_EXT : WIN_MULTWRITE;
else
return (lba48bit) ? WIN_WRITE_EXT : WIN_WRITE;
}
return WIN_NOP;
}
static ide_startstop_t chs_rw_disk (ide_drive_t *drive, struct request *rq, unsigned long block)
static ide_startstop_t chs_do_request(ide_drive_t *drive, struct request *rq, unsigned long block)
{
struct hd_drive_task_hdr taskfile;
struct hd_drive_hob_hdr hobfile;
......@@ -203,19 +216,15 @@ static ide_startstop_t chs_rw_disk (ide_drive_t *drive, struct request *rq, unsi
memcpy(args.tfRegister, &taskfile, sizeof(struct hd_drive_task_hdr));
memcpy(args.hobRegister, &hobfile, sizeof(struct hd_drive_hob_hdr));
args.command_type = ide_cmd_type_parser(&args);
args.prehandler = ide_pre_handler_parser(&taskfile, &hobfile);
args.handler = ide_handler_parser(&taskfile, &hobfile);
args.posthandler = NULL;
args.rq = (struct request *) rq;
args.block = block;
rq->special = NULL;
rq->special = (ide_task_t *)&args;
ide_cmd_type_parser(&args);
args.rq = rq;
args.block = block;
rq->special = &args;
return do_rw_taskfile(drive, &args);
}
static ide_startstop_t lba_28_rw_disk (ide_drive_t *drive, struct request *rq, unsigned long block)
static ide_startstop_t lba28_do_request(ide_drive_t *drive, struct request *rq, unsigned long block)
{
struct hd_drive_task_hdr taskfile;
struct hd_drive_hob_hdr hobfile;
......@@ -250,14 +259,10 @@ static ide_startstop_t lba_28_rw_disk (ide_drive_t *drive, struct request *rq, u
memcpy(args.tfRegister, &taskfile, sizeof(struct hd_drive_task_hdr));
memcpy(args.hobRegister, &hobfile, sizeof(struct hd_drive_hob_hdr));
args.command_type = ide_cmd_type_parser(&args);
args.prehandler = ide_pre_handler_parser(&taskfile, &hobfile);
args.handler = ide_handler_parser(&taskfile, &hobfile);
args.posthandler = NULL;
args.rq = (struct request *) rq;
args.block = block;
rq->special = NULL;
rq->special = (ide_task_t *)&args;
ide_cmd_type_parser(&args);
args.rq = rq;
args.block = block;
rq->special = &args;
return do_rw_taskfile(drive, &args);
}
......@@ -268,7 +273,7 @@ static ide_startstop_t lba_28_rw_disk (ide_drive_t *drive, struct request *rq, u
* 1073741822 == 549756 MB or 48bit addressing fake drive
*/
static ide_startstop_t lba_48_rw_disk (ide_drive_t *drive, struct request *rq, unsigned long long block)
static ide_startstop_t lba48_do_request(ide_drive_t *drive, struct request *rq, unsigned long long block)
{
struct hd_drive_task_hdr taskfile;
struct hd_drive_hob_hdr hobfile;
......@@ -314,13 +319,10 @@ static ide_startstop_t lba_48_rw_disk (ide_drive_t *drive, struct request *rq, u
memcpy(args.tfRegister, &taskfile, sizeof(struct hd_drive_task_hdr));
memcpy(args.hobRegister, &hobfile, sizeof(struct hd_drive_hob_hdr));
args.command_type = ide_cmd_type_parser(&args);
args.prehandler = ide_pre_handler_parser(&taskfile, &hobfile);
args.handler = ide_handler_parser(&taskfile, &hobfile);
args.posthandler = NULL;
args.rq = (struct request *) rq;
args.block = block;
rq->special = (ide_task_t *)&args;
ide_cmd_type_parser(&args);
args.rq = rq;
args.block = block;
rq->special = &args;
return do_rw_taskfile(drive, &args);
}
......@@ -637,9 +639,9 @@ static ide_startstop_t idedisk_special (ide_drive_t *drive)
taskfile.high_cylinder = drive->cyl>>8;
taskfile.device_head = ((drive->head-1)|drive->select.all)&0xBF;
if (!IS_PDC4030_DRIVE) {
taskfile.sector_count = drive->sect;
taskfile.command = WIN_SPECIFY;
handler = ide_handler_parser(&taskfile, &hobfile);
taskfile.sector_count = drive->sect;
taskfile.command = WIN_SPECIFY;
handler = set_geometry_intr;;
}
do_taskfile(drive, &taskfile, &hobfile, handler);
} else if (s->b.recalibrate) {
......@@ -651,7 +653,7 @@ static ide_startstop_t idedisk_special (ide_drive_t *drive)
memset(&hobfile, 0, sizeof(struct hd_drive_hob_hdr));
taskfile.sector_count = drive->sect;
taskfile.command = WIN_RESTORE;
do_taskfile(drive, &taskfile, &hobfile, ide_handler_parser(&taskfile, &hobfile));
do_taskfile(drive, &taskfile, &hobfile, recal_intr);
}
} else if (s->b.set_multmode) {
s->b.set_multmode = 0;
......@@ -1089,7 +1091,7 @@ static struct ata_operations idedisk_driver = {
owner: THIS_MODULE,
cleanup: idedisk_cleanup,
standby: idedisk_standby,
do_request: do_rw_disk,
do_request: idedisk_do_request,
end_request: NULL,
ioctl: NULL,
open: idedisk_open,
......@@ -1127,7 +1129,7 @@ int idedisk_init (void)
{
ide_drive_t *drive;
int failed = 0;
MOD_INC_USE_COUNT;
while ((drive = ide_scan_devices(ATA_DISK, "ide-disk", NULL, failed++)) != NULL) {
if (ide_register_subdriver (drive, &idedisk_driver)) {
......
drivers/ide/ide-pci.c
View file @ 198231a8
......@@ -119,6 +119,7 @@ extern void ide_init_pdc202xx(ide_hwif_t *);
extern unsigned int pci_init_piix(struct pci_dev *);
extern unsigned int ata66_piix(ide_hwif_t *);
extern void ide_init_piix(ide_hwif_t *);
extern void ide_dmacapable_piix(ide_hwif_t *, unsigned long);
#endif
#ifdef CONFIG_BLK_DEV_IT8172
......@@ -142,12 +143,6 @@ extern unsigned int ata66_sis5513(ide_hwif_t *);
extern void ide_init_sis5513(ide_hwif_t *);
#endif
#ifdef CONFIG_BLK_DEV_SLC90E66
extern unsigned int pci_init_slc90e66(struct pci_dev *);
extern unsigned int ata66_slc90e66(ide_hwif_t *);
extern void ide_init_slc90e66(ide_hwif_t *);
#endif
#ifdef CONFIG_BLK_DEV_SL82C105
extern unsigned int pci_init_sl82c105(struct pci_dev *);
extern void dma_init_sl82c105(ide_hwif_t *, unsigned long);
......@@ -197,19 +192,18 @@ typedef struct ide_pci_device_s {
static ide_pci_device_t pci_chipsets[] __initdata = {
#ifdef CONFIG_BLK_DEV_PIIX
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371FB_0, NULL, NULL, ide_init_piix, NULL, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371FB_1, NULL, NULL, ide_init_piix, NULL, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371MX, NULL, NULL, ide_init_piix, NULL, {{0x6D,0x80,0x80}, {0x6F,0x80,0x80}}, ON_BOARD, 0, ATA_F_NODMA },
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_1, pci_init_piix, NULL, ide_init_piix, NULL, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB, pci_init_piix, NULL, ide_init_piix, NULL, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_1, pci_init_piix, NULL, ide_init_piix, NULL, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_1, pci_init_piix, NULL, ide_init_piix, NULL, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_1, pci_init_piix, ata66_piix, ide_init_piix, NULL, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82372FB_1, pci_init_piix, ata66_piix, ide_init_piix, NULL, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_init_piix, NULL, ide_init_piix, NULL, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, ATA_F_NOADMA },
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_9, pci_init_piix, ata66_piix, ide_init_piix, NULL, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_8, pci_init_piix, ata66_piix, ide_init_piix, NULL, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, pci_init_piix, ata66_piix, ide_init_piix, NULL, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371FB_1, pci_init_piix, ata66_piix, ide_init_piix, ide_dmacapable_piix, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_1, pci_init_piix, ata66_piix, ide_init_piix, ide_dmacapable_piix, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB, pci_init_piix, ata66_piix, ide_init_piix, ide_dmacapable_piix, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_1, pci_init_piix, ata66_piix, ide_init_piix, ide_dmacapable_piix, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82372FB_1, pci_init_piix, ata66_piix, ide_init_piix, ide_dmacapable_piix, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_1, pci_init_piix, ata66_piix, ide_init_piix, ide_dmacapable_piix, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_1, pci_init_piix, ata66_piix, ide_init_piix, ide_dmacapable_piix, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_9, pci_init_piix, ata66_piix, ide_init_piix, ide_dmacapable_piix, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_8, pci_init_piix, ata66_piix, ide_init_piix, ide_dmacapable_piix, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, pci_init_piix, ata66_piix, ide_init_piix, ide_dmacapable_piix, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_11, pci_init_piix, ata66_piix, ide_init_piix, ide_dmacapable_piix, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
{PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1, pci_init_piix, ata66_piix, ide_init_piix, ide_dmacapable_piix, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
#endif
#ifdef CONFIG_BLK_DEV_VIA82CXXX
{PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576_1, pci_init_via82cxxx, ata66_via82cxxx, ide_init_via82cxxx, ide_dmacapable_via82cxxx, {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, ON_BOARD, 0, ATA_F_NOADMA },
......@@ -289,13 +283,11 @@ static ide_pci_device_t pci_chipsets[] __initdata = {
{PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7411, pci_init_amd74xx, ata66_amd74xx, ide_init_amd74xx, ide_dmacapable_amd74xx, {{0x40,0x01,0x01}, {0x40,0x02,0x02}}, ON_BOARD, 0, 0 },
{PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_OPUS_7441, pci_init_amd74xx, ata66_amd74xx, ide_init_amd74xx, ide_dmacapable_amd74xx, {{0x40,0x01,0x01}, {0x40,0x02,0x02}}, ON_BOARD, 0, 0 },
{PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_IDE, pci_init_amd74xx, ata66_amd74xx, ide_init_amd74xx, ide_dmacapable_amd74xx, {{0x40,0x01,0x01}, {0x40,0x02,0x02}}, ON_BOARD, 0, 0 },
{PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_IDE, pci_init_amd74xx, ata66_amd74xx, ide_init_amd74xx, ide_dmacapable_amd74xx, {{0x50,0x01,0x01}, {0x50,0x02,0x02}}, ON_BOARD, 0, 0 },
#endif
#ifdef CONFIG_BLK_DEV_PDC_ADMA
{PCI_VENDOR_ID_PDC, PCI_DEVICE_ID_PDC_1841, pci_init_pdcadma, ata66_pdcadma, ide_init_pdcadma, ide_dmacapable_pdcadma, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, OFF_BOARD, 0, ATA_F_NODMA },
#endif
#ifdef CONFIG_BLK_DEV_SLC90E66
{PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1, pci_init_slc90e66, ata66_slc90e66, ide_init_slc90e66, NULL, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
#endif
#ifdef CONFIG_BLK_DEV_SVWKS
{PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4IDE, pci_init_svwks, ata66_svwks, ide_init_svwks, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0, ATA_F_DMA },
{PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, pci_init_svwks, ata66_svwks, ide_init_svwks, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0, 0 },
......@@ -311,6 +303,7 @@ static ide_pci_device_t pci_chipsets[] __initdata = {
{PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87410, NULL, NULL, NULL, NULL, {{0x43,0x08,0x08}, {0x47,0x08,0x08}}, ON_BOARD, 0, 0 },
{PCI_VENDOR_ID_HINT, PCI_DEVICE_ID_HINT, NULL, NULL, NULL, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0, 0 },
{PCI_VENDOR_ID_HOLTEK, PCI_DEVICE_ID_HOLTEK_6565, NULL, NULL, NULL, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0, 0 },
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371MX, NULL, NULL, NULL, NULL, {{0x6D,0x80,0x80}, {0x00,0x00,0x00}}, ON_BOARD, 0, ATA_F_NODMA },
{PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8673F, NULL, NULL, NULL, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0, ATA_F_FIXIRQ },
{PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886A, NULL, NULL, NULL, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0, ATA_F_FIXIRQ },
{PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF, NULL, NULL, NULL, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0, ATA_F_FIXIRQ },
......
drivers/ide/ide-proc.c
View file @ 198231a8
......@@ -118,10 +118,6 @@ int (*svwks_display_info)(char *, char **, off_t, int) = NULL;
extern byte sis_proc;
int (*sis_display_info)(char *, char **, off_t, int) = NULL;
#endif /* CONFIG_BLK_DEV_SIS5513 */
#ifdef CONFIG_BLK_DEV_SLC90E66
extern byte slc90e66_proc;
int (*slc90e66_display_info)(char *, char **, off_t, int) = NULL;
#endif /* CONFIG_BLK_DEV_SLC90E66 */
#ifdef CONFIG_BLK_DEV_VIA82CXXX
extern byte via_proc;
int (*via_display_info)(char *, char **, off_t, int) = NULL;
......@@ -593,10 +589,6 @@ void proc_ide_create(void)
if ((sis_display_info) && (sis_proc))
create_proc_info_entry("sis", 0, proc_ide_root, sis_display_info);
#endif /* CONFIG_BLK_DEV_SIS5513 */
#ifdef CONFIG_BLK_DEV_SLC90E66
if ((slc90e66_display_info) && (slc90e66_proc))
create_proc_info_entry("slc90e66", 0, proc_ide_root, slc90e66_display_info);
#endif /* CONFIG_BLK_DEV_SLC90E66 */
#ifdef CONFIG_BLK_DEV_VIA82CXXX
if ((via_display_info) && (via_proc))
create_proc_info_entry("via", 0, proc_ide_root, via_display_info);
......@@ -653,10 +645,6 @@ void proc_ide_destroy(void)
if ((sis_display_info) && (sis_proc))
remove_proc_entry("ide/sis", 0);
#endif /* CONFIG_BLK_DEV_SIS5513 */
#ifdef CONFIG_BLK_DEV_SLC90E66
if ((slc90e66_display_info) && (slc90e66_proc))
remove_proc_entry("ide/slc90e66",0);
#endif /* CONFIG_BLK_DEV_SLC90E66 */
#ifdef CONFIG_BLK_DEV_VIA82CXXX
if ((via_display_info) && (via_proc))
remove_proc_entry("ide/via",0);
......
drivers/ide/ide-taskfile.c
View file @ 198231a8
This diff is collapsed.
drivers/ide/pdc4030.c
View file @ 198231a8
......@@ -654,14 +654,14 @@ ide_startstop_t promise_rw_disk (ide_drive_t *drive, struct request *rq, unsigne
memcpy(args.tfRegister, &taskfile, sizeof(struct hd_drive_task_hdr));
memcpy(args.hobRegister, NULL, sizeof(struct hd_drive_hob_hdr));
args.command_type = ide_cmd_type_parser(&args);
ide_cmd_type_parser(&args);
/* We don't use the generic inerrupt handlers here? */
args.prehandler = NULL;
args.handler = NULL;
args.posthandler = NULL;
args.rq = (struct request *) rq;
args.rq = rq;
args.block = block;
rq->special = NULL;
rq->special = (ide_task_t *)&args;
rq->special = &args;
return do_pdc4030_io(drive, &args);
}
......
drivers/ide/piix.c
View file @ 198231a8
This diff is collapsed.
drivers/ide/slc90e66.c deleted 100644 → 0
View file @ ed0e83f5
This diff is collapsed.
drivers/pci/pci.ids
View file @ 198231a8
......@@ -526,8 +526,10 @@
2040 79c974
7006 AMD-751 [Irongate] System Controller
7007 AMD-751 [Irongate] AGP Bridge
700e AMD-760 [Irongate] System Controller
700f AMD-760 [Irongate] AGP Bridge
700c AMD-760 MP [IGD4-2P] System Controller
700d AMD-760 MP [IGD4-2P] AGP Bridge
700e AMD-760 [IGD4-1P] System Controller
700f AMD-760 [IGD4-1P] AGP Bridge
7400 AMD-755 [Cobra] ISA
7401 AMD-755 [Cobra] IDE
7403 AMD-755 [Cobra] ACPI
......@@ -540,11 +542,21 @@
7411 AMD-765 [Viper] IDE
7413 AMD-765 [Viper] ACPI
7414 AMD-765 [Viper] USB
7440 AMD-768 [??] ISA
7441 AMD-768 [??] IDE
7443 AMD-768 [??] ACPI
7448 AMD-768 [??] PCI
7449 AMD-768 [??] USB
7440 AMD-768 [Opus] ISA
7441 AMD-768 [Opus] IDE
7443 AMD-768 [Opus] ACPI
7448 AMD-768 [Opus] PCI
7449 AMD-768 [Opus] USB
7454 AMD-8151 System Controller
7455 AMD-8151 AGP Bridge
7460 AMD-8111 PCI
7461 AMD-8111 USB
7462 AMD-8111 Ethernet
7468 AMD-8111 LPC
7469 AMD-8111 IDE
746a AMD-8111 SMBus 2.0
746b AMD-8111 ACPI
746d AMD-8111 AC97 Audio
1023 Trident Microsystems
0194 82C194
2000 4DWave DX
......@@ -1055,11 +1067,11 @@
1052 ?Young Micro Systems
1053 Young Micro Systems
1054 Hitachi, Ltd
1055 EFAR Microsystems
9130 EIDE Controller
9460 PCI to ISA Bridge
9462 USB Universal Host Controller [OHCI]
9463 Power Management Controller [Bridge]
1055 Efar Microsystems
9130 slc90e66 [Victory66] IDE
9460 slc90e66 [Victory66] ISA
9462 slc90e66 [Victory66] USB
9463 slc90e66 [Victory66] ACPI
1056 ICL
# Motorola made a mistake and used 1507 instead of 1057 in some chips. Please look at the 1507 entry as well when updating this.
1057 Motorola
......@@ -1925,6 +1937,7 @@
0151 NV15 DDR (GeForce2 GTS)
0152 NV15 Bladerunner (GeForce2 Ultra)
0153 NV15 GL (Quadro2 Pro)
01bc nForce IDE
0200 NV20 (GeForce3)
0203 Quadro DCC
10df Emulex Corporation
......@@ -5066,6 +5079,8 @@
244c 82820 820 (Camino 2) Chipset ISA Bridge (ICH2-M)
244e 82820 820 (Camino 2) Chipset PCI
2485 AC'97 Audio Controller
248a 82801CAM ICH3-M IDE
248b 82801CA ICH3 IDE
2500 82820 820 (Camino) Chipset Host Bridge (MCH)
1043 801c P3C-2000 system chipset
2501 82820 820 (Camino) Chipset Host Bridge (MCH)
......@@ -5118,10 +5133,10 @@
71a0 440GX - 82443GX Host bridge
71a1 440GX - 82443GX AGP bridge
71a2 440GX - 82443GX Host bridge (AGP disabled)
7600 82372FB PCI to ISA Bridge
7601 82372FB PIIX4 IDE
7602 82372FB [PCI-to-USB UHCI]
7603 82372FB System Management Bus Controller
7600 82372FB PIIX5 ISA
7601 82372FB PIIX5 IDE
7602 82372FB PIIX5 USB
7603 82372FB PIIX5 SMBus
7800 i740
1092 0100 Stealth II G460
8086 0100 Intel740 Graphics Accelerator
......
include/linux/ide.h
View file @ 198231a8
......@@ -815,7 +815,6 @@ typedef struct ide_task_s {
int command_type;
ide_pre_handler_t *prehandler;
ide_handler_t *handler;
ide_post_handler_t *posthandler;
void *special; /* valid_t generally */
struct request *rq; /* copy of request */
unsigned long block; /* copy of block */
......@@ -842,17 +841,17 @@ void do_taskfile (ide_drive_t *drive, struct hd_drive_task_hdr *taskfile, struct
* Special Flagged Register Validation Caller
*/
ide_startstop_t set_multmode_intr (ide_drive_t *drive);
ide_startstop_t task_no_data_intr (ide_drive_t *drive);
extern ide_startstop_t recal_intr(ide_drive_t *drive);
extern ide_startstop_t set_geometry_intr(ide_drive_t *drive);
extern ide_startstop_t set_multmode_intr(ide_drive_t *drive);
extern ide_startstop_t task_no_data_intr(ide_drive_t *drive);
int ide_wait_taskfile (ide_drive_t *drive, struct hd_drive_task_hdr *taskfile, struct hd_drive_hob_hdr *hobfile, byte *buf);
int ide_raw_taskfile (ide_drive_t *drive, ide_task_t *cmd, byte *buf);
ide_pre_handler_t * ide_pre_handler_parser (struct hd_drive_task_hdr *taskfile, struct hd_drive_hob_hdr *hobfile);
ide_handler_t * ide_handler_parser (struct hd_drive_task_hdr *taskfile, struct hd_drive_hob_hdr *hobfile);
/* Expects args is a full set of TF registers and parses the command type */
int ide_cmd_type_parser (ide_task_t *args);
extern void ide_cmd_type_parser(ide_task_t *args);
int ide_cmd_ioctl (ide_drive_t *drive, struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg);
int ide_task_ioctl (ide_drive_t *drive, struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg);
......
include/linux/pci_ids.h
View file @ 198231a8
......@@ -865,6 +865,7 @@
#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GTS2 0x0151
#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_ULTRA 0x0152
#define PCI_DEVICE_ID_NVIDIA_QUADRO2_PRO 0x0153
#define PCI_DEVICE_ID_NVIDIA_NFORCE_IDE 0x01bc
#define PCI_VENDOR_ID_IMS 0x10e0
#define PCI_DEVICE_ID_IMS_8849 0x8849
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7