Skip to content

L
linux
Commit 19be685a authored by Trent Piepho's avatar Trent Piepho Committed by Mauro Carvalho Chehab
Browse files
Options

V4L/DVB (4789): Lgdt330x: SNR and signal strength reporting 

Update the SNR calculations to use the new dvb_math log function, and add
SNR calculations for all supported modulations for both lg dt3302 and dt3303.
The QAM equations don't appear in the dt3302 datasheet, so the ones from the
dt3303 datasheet were used.
SNR returned is the actual value in dB as 8.8 fixed point.
Reporting of real signal strength isn't supported, so rather than return 0,
which confuses some software and users, a re-scaled SNR value is returned.
Code originally by Rusty Scott.
Signed-off-by: default avatarTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: default avatarRusty Scott <rustys@ieee.org>
Signed-off-by: default avatarMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@infradead.org>
parent dbb2e639
Hide whitespace changes
Inline Side-by-side
Showing with 132 additions and 126 deletions
drivers/media/dvb/frontends/lgdt330x.c
View file @ 19be685a
......@@ -31,9 +31,6 @@
* Air2PC/AirStar 2 ATSC 3rd generation (HD5000)
* pcHDTV HD5500
*
* TODO:
* signal strength always returns 0.
*
*/
#include <linux/kernel.h>
......@@ -46,9 +43,13 @@
#include <asm/byteorder.h>
#include "dvb_frontend.h"
#include "dvb_math.h"
#include "lgdt330x_priv.h"
#include "lgdt330x.h"
/* Use Equalizer Mean Squared Error instead of Phaser Tracker MSE */
/* #define USE_EQMSE */
static int debug = 0;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug,"Turn on/off lgdt330x frontend debugging (default:off).");
......@@ -68,6 +69,7 @@ struct lgdt330x_state
/* Demodulator private data */
fe_modulation_t current_modulation;
u32 snr; /* Result of last SNR calculation */
/* Tuner private data */
u32 current_frequency;
......@@ -543,151 +545,150 @@ static int lgdt3303_read_status(struct dvb_frontend* fe, fe_status_t* status)
return 0;
}
static int lgdt330x_read_signal_strength(struct dvb_frontend* fe, u16* strength)
/* Calculate SNR estimation (scaled by 2^24)
8-VSB SNR equations from LGDT3302 and LGDT3303 datasheets, QAM
equations from LGDT3303 datasheet. VSB is the same between the '02
and '03, so maybe QAM is too? Perhaps someone with a newer datasheet
that has QAM information could verify?
For 8-VSB: (two ways, take your pick)
LGDT3302:
SNR_EQ = 10 * log10(25 * 24^2 / EQ_MSE)
LGDT3303:
SNR_EQ = 10 * log10(25 * 32^2 / EQ_MSE)
LGDT3302 & LGDT3303:
SNR_PT = 10 * log10(25 * 32^2 / PT_MSE) (we use this one)
For 64-QAM:
SNR = 10 * log10( 688128 / MSEQAM)
For 256-QAM:
SNR = 10 * log10( 696320 / MSEQAM)
We re-write the snr equation as:
SNR * 2^24 = 10*(c - intlog10(MSE))
Where for 256-QAM, c = log10(696320) * 2^24, and so on. */
static u32 calculate_snr(u32 mse, u32 c)
{
/* not directly available. */
*strength = 0;
return 0;
if (mse == 0) /* No signal */
return 0;
mse = intlog10(mse);
if (mse > c) {
/* Negative SNR, which is possible, but realisticly the
demod will lose lock before the signal gets this bad. The
API only allows for unsigned values, so just return 0 */
return 0;
}
return 10*(c - mse);
}
static int lgdt3302_read_snr(struct dvb_frontend* fe, u16* snr)
{
#ifdef SNR_IN_DB
/*
* Spec sheet shows formula for SNR_EQ = 10 log10(25 * 24**2 / noise)
* and SNR_PH = 10 log10(25 * 32**2 / noise) for equalizer and phase tracker
* respectively. The following tables are built on these formulas.
* The usual definition is SNR = 20 log10(signal/noise)
* If the specification is wrong the value retuned is 1/2 the actual SNR in db.
*
* This table is a an ordered list of noise values computed by the
* formula from the spec sheet such that the index into the table
* starting at 43 or 45 is the SNR value in db. There are duplicate noise
* value entries at the beginning because the SNR varies more than
* 1 db for a change of 1 digit in noise at very small values of noise.
*
* Examples from SNR_EQ table:
* noise SNR
* 0 43
* 1 42
* 2 39
* 3 37
* 4 36
* 5 35
* 6 34
* 7 33
* 8 33
* 9 32
* 10 32
* 11 31
* 12 31
* 13 30
*/
static const u32 SNR_EQ[] =
{ 1, 2, 2, 2, 3, 3, 4, 4, 5, 7,
9, 11, 13, 17, 21, 26, 33, 41, 52, 65,
81, 102, 129, 162, 204, 257, 323, 406, 511, 644,
810, 1020, 1284, 1616, 2035, 2561, 3224, 4059, 5110, 6433,
8098, 10195, 12835, 16158, 20341, 25608, 32238, 40585, 51094, 64323,
80978, 101945, 128341, 161571, 203406, 256073, 0x40000
};
static const u32 SNR_PH[] =
{ 1, 2, 2, 2, 3, 3, 4, 5, 6, 8,
10, 12, 15, 19, 23, 29, 37, 46, 58, 73,
91, 115, 144, 182, 229, 288, 362, 456, 574, 722,
909, 1144, 1440, 1813, 2282, 2873, 3617, 4553, 5732, 7216,
9084, 11436, 14396, 18124, 22817, 28724, 36161, 45524, 57312, 72151,
90833, 114351, 143960, 181235, 228161, 0x080000
};
static u8 buf[5];/* read data buffer */
static u32 noise; /* noise value */
static u32 snr_db; /* index into SNR_EQ[] */
struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv;
u8 buf[5]; /* read data buffer */
u32 noise; /* noise value */
u32 c; /* per-modulation SNR calculation constant */
/* read both equalizer and phase tracker noise data */
i2c_read_demod_bytes(state, EQPH_ERR0, buf, sizeof(buf));
if (state->current_modulation == VSB_8) {
/* Equalizer Mean-Square Error Register for VSB */
switch(state->current_modulation) {
case VSB_8:
i2c_read_demod_bytes(state, LGDT3302_EQPH_ERR0, buf, 5);
#ifdef USE_EQMSE
/* Use Equalizer Mean-Square Error Register */
/* SNR for ranges from -15.61 to +41.58 */
noise = ((buf[0] & 7) << 16) | (buf[1] << 8) | buf[2];
/*
* Look up noise value in table.
* A better search algorithm could be used...
* watch out there are duplicate entries.
*/
for (snr_db = 0; snr_db < sizeof(SNR_EQ); snr_db++) {
if (noise < SNR_EQ[snr_db]) {
*snr = 43 - snr_db;
break;
}
}
} else {
/* Phase Tracker Mean-Square Error Register for QAM */
noise = ((buf[0] & 7<<3) << 13) | (buf[3] << 8) | buf[4];
/* Look up noise value in table. */
for (snr_db = 0; snr_db < sizeof(SNR_PH); snr_db++) {
if (noise < SNR_PH[snr_db]) {
*snr = 45 - snr_db;
break;
}
}
}
c = 69765745; /* log10(25*24^2)*2^24 */
#else
/* Return the raw noise value */
static u8 buf[5];/* read data buffer */
static u32 noise; /* noise value */
struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv;
/* read both equalizer and pase tracker noise data */
i2c_read_demod_bytes(state, EQPH_ERR0, buf, sizeof(buf));
if (state->current_modulation == VSB_8) {
/* Phase Tracker Mean-Square Error Register for VSB */
/* Use Phase Tracker Mean-Square Error Register */
/* SNR for ranges from -13.11 to +44.08 */
noise = ((buf[0] & 7<<3) << 13) | (buf[3] << 8) | buf[4];
} else {
/* Carrier Recovery Mean-Square Error for QAM */
i2c_read_demod_bytes(state, 0x1a, buf, 2);
c = 73957994; /* log10(25*32^2)*2^24 */
#endif
break;
case QAM_64:
case QAM_256:
i2c_read_demod_bytes(state, CARRIER_MSEQAM1, buf, 2);
noise = ((buf[0] & 3) << 8) | buf[1];
c = state->current_modulation == QAM_64 ? 97939837 : 98026066;
/* log10(688128)*2^24 and log10(696320)*2^24 */
break;
default:
printk(KERN_ERR "lgdt330x: %s: Modulation set to unsupported value\n",
__FUNCTION__);
return -EREMOTEIO; /* return -EDRIVER_IS_GIBBERED; */
}
/* Small values for noise mean signal is better so invert noise */
*snr = ~noise;
#endif
state->snr = calculate_snr(noise, c);
*snr = (state->snr) >> 16; /* Convert from 8.24 fixed-point to 8.8 */
dprintk("%s: noise = 0x%05x, snr = %idb\n",__FUNCTION__, noise, *snr);
dprintk("%s: noise = 0x%08x, snr = %d.%02d dB\n", __FUNCTION__, noise,
state->snr >> 24, (((state->snr>>8) & 0xffff) * 100) >> 16);
return 0;
}
static int lgdt3303_read_snr(struct dvb_frontend* fe, u16* snr)
{
/* Return the raw noise value */
static u8 buf[5];/* read data buffer */
static u32 noise; /* noise value */
struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv;
u8 buf[5]; /* read data buffer */
u32 noise; /* noise value */
u32 c; /* per-modulation SNR calculation constant */
if (state->current_modulation == VSB_8) {
i2c_read_demod_bytes(state, 0x6e, buf, 5);
/* Phase Tracker Mean-Square Error Register for VSB */
switch(state->current_modulation) {
case VSB_8:
i2c_read_demod_bytes(state, LGDT3303_EQPH_ERR0, buf, 5);
#ifdef USE_EQMSE
/* Use Equalizer Mean-Square Error Register */
/* SNR for ranges from -16.12 to +44.08 */
noise = ((buf[0] & 0x78) << 13) | (buf[1] << 8) | buf[2];
c = 73957994; /* log10(25*32^2)*2^24 */
#else
/* Use Phase Tracker Mean-Square Error Register */
/* SNR for ranges from -13.11 to +44.08 */
noise = ((buf[0] & 7) << 16) | (buf[3] << 8) | buf[4];
} else {
/* Carrier Recovery Mean-Square Error for QAM */
i2c_read_demod_bytes(state, 0x1a, buf, 2);
c = 73957994; /* log10(25*32^2)*2^24 */
#endif
break;
case QAM_64:
case QAM_256:
i2c_read_demod_bytes(state, CARRIER_MSEQAM1, buf, 2);
noise = (buf[0] << 8) | buf[1];
c = state->current_modulation == QAM_64 ? 97939837 : 98026066;
/* log10(688128)*2^24 and log10(696320)*2^24 */
break;
default:
printk(KERN_ERR "lgdt330x: %s: Modulation set to unsupported value\n",
__FUNCTION__);
return -EREMOTEIO; /* return -EDRIVER_IS_GIBBERED; */
}
/* Small values for noise mean signal is better so invert noise */
*snr = ~noise;
state->snr = calculate_snr(noise, c);
*snr = (state->snr) >> 16; /* Convert from 8.24 fixed-point to 8.8 */
dprintk("%s: noise = 0x%08x, snr = %d.%02d dB\n", __FUNCTION__, noise,
state->snr >> 24, (((state->snr >> 8) & 0xffff) * 100) >> 16);
return 0;
}
static int lgdt330x_read_signal_strength(struct dvb_frontend* fe, u16* strength)
{
/* Calculate Strength from SNR up to 35dB */
/* Even though the SNR can go higher than 35dB, there is some comfort */
/* factor in having a range of strong signals that can show at 100% */
struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv;
u16 snr;
int ret;
dprintk("%s: noise = 0x%05x, snr = %idb\n",__FUNCTION__, noise, *snr);
ret = fe->ops.read_snr(fe, &snr);
if (ret != 0)
return ret;
/* Rather than use the 8.8 value snr, use state->snr which is 8.24 */
/* scale the range 0 - 35*2^24 into 0 - 65535 */
if (state->snr >= 8960 * 0x10000)
*strength = 0xffff;
else
*strength = state->snr / 8960;
return 0;
}
......
drivers/media/dvb/frontends/lgdt330x_priv.h
View file @ 19be685a
......@@ -51,14 +51,19 @@ enum I2C_REG {
AGC_RFIF_ACC2= 0x3b,
AGC_STATUS= 0x3f,
SYNC_STATUS_VSB= 0x43,
EQPH_ERR0= 0x47,
EQ_ERR1= 0x48,
EQ_ERR2= 0x49,
PH_ERR1= 0x4a,
PH_ERR2= 0x4b,
DEMUX_CONTROL= 0x66,
LGDT3302_EQPH_ERR0= 0x47,
LGDT3302_EQ_ERR1= 0x48,
LGDT3302_EQ_ERR2= 0x49,
LGDT3302_PH_ERR1= 0x4a,
LGDT3302_PH_ERR2= 0x4b,
LGDT3302_PACKET_ERR_COUNTER1= 0x6a,
LGDT3302_PACKET_ERR_COUNTER2= 0x6b,
LGDT3303_EQPH_ERR0= 0x6e,
LGDT3303_EQ_ERR1= 0x6f,
LGDT3303_EQ_ERR2= 0x70,
LGDT3303_PH_ERR1= 0x71,
LGDT3303_PH_ERR2= 0x72,
LGDT3303_PACKET_ERR_COUNTER1= 0x8b,
LGDT3303_PACKET_ERR_COUNTER2= 0x8c,
};
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7