Merge branch 'fixes-for-3.7' of git://gitorious.org/linux-can/linux-can

Marc Kleine-Budde says:

====================
here are three patches for the v3.7 release cycle. Two patches by Peter Senna
Tschudin which fix the return values in the error handling path of the sja1000
peak pci and pcmcia driver. And one patch by myself that fixes a compile
breakage of the mpc5xxx_can mscan driver due to a section conflict.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/can/mscan/mpc5xxx_can.c

@@ -247,7 +247,7 @@ static u32 __devinit mpc512x_can_get_clock(struct platform_device *ofdev,
 }
 #endif /* CONFIG_PPC_MPC512x */
 
-static struct of_device_id mpc5xxx_can_table[];
+static const struct of_device_id mpc5xxx_can_table[];
 static int __devinit mpc5xxx_can_probe(struct platform_device *ofdev)
 {
 	const struct of_device_id *match;
@@ -380,17 +380,17 @@ static int mpc5xxx_can_resume(struct platform_device *ofdev)
 }
 #endif
 
-static const struct mpc5xxx_can_data __devinitdata mpc5200_can_data = {
+static const struct mpc5xxx_can_data __devinitconst mpc5200_can_data = {
 	.type = MSCAN_TYPE_MPC5200,
 	.get_clock = mpc52xx_can_get_clock,
 };
 
-static const struct mpc5xxx_can_data __devinitdata mpc5121_can_data = {
+static const struct mpc5xxx_can_data __devinitconst mpc5121_can_data = {
 	.type = MSCAN_TYPE_MPC5121,
 	.get_clock = mpc512x_can_get_clock,
 };
 
-static struct of_device_id __devinitdata mpc5xxx_can_table[] = {
+static const struct of_device_id __devinitconst mpc5xxx_can_table[] = {
 	{ .compatible = "fsl,mpc5200-mscan", .data = &mpc5200_can_data, },
 	/* Note that only MPC5121 Rev. 2 (and later) is supported */
 	{ .compatible = "fsl,mpc5121-mscan", .data = &mpc5121_can_data, },

drivers/net/can/sja1000/peak_pci.c

@@ -583,12 +583,14 @@ static int __devinit peak_pci_probe(struct pci_dev *pdev,
 	cfg_base = pci_iomap(pdev, 0, PEAK_PCI_CFG_SIZE);
 	if (!cfg_base) {
 		dev_err(&pdev->dev, "failed to map PCI resource #0\n");
+		err = -ENOMEM;
 		goto failure_release_regions;
 	}
 
 	reg_base = pci_iomap(pdev, 1, PEAK_PCI_CHAN_SIZE * channels);
 	if (!reg_base) {
 		dev_err(&pdev->dev, "failed to map PCI resource #1\n");
+		err = -ENOMEM;
 		goto failure_unmap_cfg_base;
 	}
 

drivers/net/can/sja1000/peak_pcmcia.c

@@ -686,8 +686,10 @@ static int __devinit pcan_probe(struct pcmcia_device *pdev)
 
 	/* detect available channels */
 	pcan_add_channels(card);
-	if (!card->chan_count)
+	if (!card->chan_count) {
+		err = -ENOMEM;
 		goto probe_err_4;
+	}
 
 	/* init the timer which controls the leds */
 	init_timer(&card->led_timer);