Commit 19fd5adb authored by Manasi Navare's avatar Manasi Navare

drm/dsc: Define VESA Display Stream Compression Capabilities

This defines all the DSC parameters as per the VESA DSC spec
that will be required for DSC encoder/decoder

v6: (From Manasi)
* Add a bit mask for RANGE_BPG_OFFSET for 6 bits(Manasi)
v5 (From Manasi)
* Add the RC constants as per the spec
v4 (From Manasi)
* Add the DSC_MUX_WORD_SIZE constants (Manasi)

v3 (From Manasi)
* Remove the duplicate define (Suggested By:Harry Wentland)

v2: Define this struct in DRM (From Manasi)
* Changed the data types to u8/u16 instead of unsigned longs (Manasi)
* Remove driver specific fields (Manasi)
* Move this struct definition to DRM (Manasi)
* Define DSC 1.2 parameters (Manasi)
* Use DSC_NUM_BUF_RANGES (Manasi)
* Call it drm_dsc_config (Manasi)

Cc: dri-devel@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: default avatarManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: default avatarGaurav K Singh <gaurav.k.singh@intel.com>
Co-developed-by: default avatarGaurav K Singh <gaurav.k.singh@intel.com>
Acked-by: default avatarHarry Wentland <harry.wentland@amd.com>
Acked-by: Sean Paul <seanpaul@chromium.org> (For merging through
drm-intel)
Reviewed-by: default avatarAnusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181127214125.17658-3-manasi.d.navare@intel.com
parent 7c247c06
...@@ -11,7 +11,120 @@ ...@@ -11,7 +11,120 @@
#include <drm/drm_dp_helper.h> #include <drm/drm_dp_helper.h>
/* VESA Display Stream Compression DSC 1.2 constants */ /* VESA Display Stream Compression DSC 1.2 constants */
#define DSC_NUM_BUF_RANGES 15 #define DSC_NUM_BUF_RANGES 15
#define DSC_MUX_WORD_SIZE_8_10_BPC 48
#define DSC_MUX_WORD_SIZE_12_BPC 64
#define DSC_RC_PIXELS_PER_GROUP 3
#define DSC_SCALE_DECREMENT_INTERVAL_MAX 4095
#define DSC_RANGE_BPG_OFFSET_MASK 0x3f
/* Configuration for a single Rate Control model range */
struct drm_dsc_rc_range_parameters {
/* Min Quantization Parameters allowed for this range */
u8 range_min_qp;
/* Max Quantization Parameters allowed for this range */
u8 range_max_qp;
/* Bits/group offset to apply to target for this group */
u8 range_bpg_offset;
};
struct drm_dsc_config {
/* Bits / component for previous reconstructed line buffer */
u8 line_buf_depth;
/* Bits per component to code (must be 8, 10, or 12) */
u8 bits_per_component;
/*
* Flag indicating to do RGB - YCoCg conversion
* and back (should be 1 for RGB input)
*/
bool convert_rgb;
u8 slice_count;
/* Slice Width */
u16 slice_width;
/* Slice Height */
u16 slice_height;
/*
* 4:2:2 enable mode (from PPS, 4:2:2 conversion happens
* outside of DSC encode/decode algorithm)
*/
bool enable422;
/* Picture Width */
u16 pic_width;
/* Picture Height */
u16 pic_height;
/* Offset to bits/group used by RC to determine QP adjustment */
u8 rc_tgt_offset_high;
/* Offset to bits/group used by RC to determine QP adjustment */
u8 rc_tgt_offset_low;
/* Bits/pixel target << 4 (ie., 4 fractional bits) */
u16 bits_per_pixel;
/*
* Factor to determine if an edge is present based
* on the bits produced
*/
u8 rc_edge_factor;
/* Slow down incrementing once the range reaches this value */
u8 rc_quant_incr_limit1;
/* Slow down incrementing once the range reaches this value */
u8 rc_quant_incr_limit0;
/* Number of pixels to delay the initial transmission */
u16 initial_xmit_delay;
/* Number of pixels to delay the VLD on the decoder,not including SSM */
u16 initial_dec_delay;
/* Block prediction enable */
bool block_pred_enable;
/* Bits/group offset to use for first line of the slice */
u8 first_line_bpg_offset;
/* Value to use for RC model offset at slice start */
u16 initial_offset;
/* Thresholds defining each of the buffer ranges */
u16 rc_buf_thresh[DSC_NUM_BUF_RANGES - 1];
/* Parameters for each of the RC ranges */
struct drm_dsc_rc_range_parameters rc_range_params[DSC_NUM_BUF_RANGES];
/* Total size of RC model */
u16 rc_model_size;
/* Minimum QP where flatness information is sent */
u8 flatness_min_qp;
/* Maximum QP where flatness information is sent */
u8 flatness_max_qp;
/* Initial value for scale factor */
u8 initial_scale_value;
/* Decrement scale factor every scale_decrement_interval groups */
u16 scale_decrement_interval;
/* Increment scale factor every scale_increment_interval groups */
u16 scale_increment_interval;
/* Non-first line BPG offset to use */
u16 nfl_bpg_offset;
/* BPG offset used to enforce slice bit */
u16 slice_bpg_offset;
/* Final RC linear transformation offset value */
u16 final_offset;
/* Enable on-off VBR (ie., disable stuffing bits) */
bool vbr_enable;
/* Mux word size (in bits) for SSM mode */
u8 mux_word_size;
/*
* The (max) size in bytes of the "chunks" that are
* used in slice multiplexing
*/
u16 slice_chunk_size;
/* Rate Control buffer siz in bits */
u16 rc_bits;
/* DSC Minor Version */
u8 dsc_version_minor;
/* DSC Major version */
u8 dsc_version_major;
/* Native 4:2:2 support */
bool native_422;
/* Native 4:2:0 support */
bool native_420;
/* Additional bits/grp for seconnd line of slice for native 4:2:0 */
u8 second_line_bpg_offset;
/* Num of bits deallocated for each grp that is not in second line of slice */
u16 nsl_bpg_offset;
/* Offset adj fr second line in Native 4:2:0 mode */
u16 second_line_offset_adj;
};
/** /**
* struct picture_parameter_set - Represents 128 bytes of Picture Parameter Set * struct picture_parameter_set - Represents 128 bytes of Picture Parameter Set
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment