[PATCH] Remove obsolete file Documentation/isdn/README.eicon

The file

   Documentation/isdn/README.eicon

is outdated and obsolete in kernel 2.6.  This file includes description of
the old Eicon ISDN driver in kernel 2.4, which was removed in 2.6.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Documentation/isdn/README.eicon

-$Id: README.eicon,v 1.10.6.1 2001/02/19 10:04:59 armin Exp $
-
-(c) 1999,2000 Armin Schindler (mac@melware.de)
-(c) 1999,2000 Cytronics & Melware (info@melware.de)
-
-This document describes the eicon driver for the
-Eicon active ISDN cards.
-
-It is meant to be used with isdn4linux, an ISDN link-level module for Linux.
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-
-
-Supported Cards
-===============
-
-Old ISA type
-------------
-- S-Card ISA
-- SX-Card ISA
-- SXn-Card ISA
-- SCOM-Card ISA
-- Quadro-Card ISA
-- S2M-Card ISA
-
-DIVA Server family
-------------------
-- DIVA Server BRI/PCI 2M
-- DIVA Server PRI/PCI 2M (9M 23M 30M)
-- DIVA Server 4BRI/PCI
-	supported functions of onboard DSPs:
-	- analog modem
-	- fax group 2/3 (Fax Class 2 commands)
-	- DTMF detection
-
-
-ISDN D-Channel Protocols
-------------------------
-
-- ETSI (Euro-DSS1) 
-- 1TR6 (German ISDN) *not testet*
-- other protocols exist for the range of DIVA Server cards,
-  but they are not fully testet yet.
-
-
-You can load the module simply by using the insmod or modprobe function :
-
-  insmod eicon [id=driverid] [membase=<membase>] [irq=<irq>]
-
-
-The module will automatically probe the PCI-cards. If the id-option
-is omitted, the driver will assume 'eicon0' for the first pci card and
-increases the digit with each further card. With a given driver-id
-the module appends a number starting with '0'.
-
-For ISA-cards you have to specify membase, irq and id. If id or
-membase is missing/invalid, the driver will not be loaded except
-PCI-cards were found. Additional ISA-cards and irq/membase changes
-can be done with the eiconctrl utility.
-
-After loading the module, you have to download the protocol and
-dsp-code by using the eiconctrl utility of isdn4k-utils.
-
-
-Example for loading and starting a BRI card with E-DSS1 Protocol.
-
-	eiconctrl [-d DriverId] load etsi
-
-Example for a BRI card with E-DSS1 Protocol with PtP configuration.
-
-	eiconctrl [-d DriverId] load etsi -n -t1 -s1
-
-
-Example for loading and starting a PRI card with E-DSS1 Protocol.
-
-	eiconctrl [-d DriverId] load etsi -s2 -n
-
-
-Details about using the eiconctrl utility are in 'man eiconctrl'
-or will be printed by starting eiconctrl without any parameters.
-
-ISDNLOG:
-With eicon driver version 1.77 or newer and the eiconctrl utility
-of version 1.1 or better, you can use the isdnlog user program
-with your DIVA Server BRI card.
-Just use "eiconctrl isdnlog on" and the driver will generate
-the necessary D-Channel traces for isdnlog.
-
-
-
-Thanks to 
-	Deutsche Mailbox Saar-Lor-Lux GmbH
-	for sponsoring and testing fax
-	capabilities with Diva Server cards.
-
-
-Any reports about bugs, errors and even wishes are welcome.
-
-
-Have fun !
-
-Armin Schindler
-mac@melware.de
-http://www.melware.de
-