Commit 1a6974b2 authored by Yuval Mintz's avatar Yuval Mintz Committed by David S. Miller

bnx2x: Prevent an illegal pointer dereference during panic

During a panic, the driver tries to print the Management FW buffer of recent
commands. To do so, the driver reads the address of that buffer from a known
address. If the buffer is unavailable (e.g., PCI reads don't work, MCP is
failing, etc.), the driver will try to access the address it has read, possibly
causing a kernel panic.

This check 'sanitizes' the access, validating the read value is indeed a valid
address inside the management FW's buffers.
The patch also removes a read outside the scope of the buffer, which resulted
in some unrelated chraracters appearing in the log.
Signed-off-by: default avatarYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: default avatarDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: default avatarEilon Greenstein <eilong@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent b1239723
......@@ -2498,4 +2498,8 @@ enum bnx2x_pci_bus_speed {
};
void bnx2x_set_local_cmng(struct bnx2x *bp);
#define MCPR_SCRATCH_BASE(bp) \
(CHIP_IS_E1x(bp) ? MCP_REG_MCPR_SCRATCH : MCP_A_REG_MCPR_SCRATCH)
#endif /* bnx2x.h */
......@@ -751,6 +751,10 @@ static int bnx2x_mc_assert(struct bnx2x *bp)
return rc;
}
#define MCPR_TRACE_BUFFER_SIZE (0x800)
#define SCRATCH_BUFFER_SIZE(bp) \
(CHIP_IS_E1(bp) ? 0x10000 : (CHIP_IS_E1H(bp) ? 0x20000 : 0x28000))
void bnx2x_fw_dump_lvl(struct bnx2x *bp, const char *lvl)
{
u32 addr, val;
......@@ -775,7 +779,17 @@ void bnx2x_fw_dump_lvl(struct bnx2x *bp, const char *lvl)
trace_shmem_base = bp->common.shmem_base;
else
trace_shmem_base = SHMEM2_RD(bp, other_shmem_base_addr);
addr = trace_shmem_base - 0x800;
/* sanity */
if (trace_shmem_base < MCPR_SCRATCH_BASE(bp) + MCPR_TRACE_BUFFER_SIZE ||
trace_shmem_base >= MCPR_SCRATCH_BASE(bp) +
SCRATCH_BUFFER_SIZE(bp)) {
BNX2X_ERR("Unable to dump trace buffer (mark %x)\n",
trace_shmem_base);
return;
}
addr = trace_shmem_base - MCPR_TRACE_BUFFER_SIZE;
/* validate TRCB signature */
mark = REG_RD(bp, addr);
......@@ -787,14 +801,17 @@ void bnx2x_fw_dump_lvl(struct bnx2x *bp, const char *lvl)
/* read cyclic buffer pointer */
addr += 4;
mark = REG_RD(bp, addr);
mark = (CHIP_IS_E1x(bp) ? MCP_REG_MCPR_SCRATCH : MCP_A_REG_MCPR_SCRATCH)
+ ((mark + 0x3) & ~0x3) - 0x08000000;
mark = MCPR_SCRATCH_BASE(bp) + ((mark + 0x3) & ~0x3) - 0x08000000;
if (mark >= trace_shmem_base || mark < addr + 4) {
BNX2X_ERR("Mark doesn't fall inside Trace Buffer\n");
return;
}
printk("%s" "begin fw dump (mark 0x%x)\n", lvl, mark);
printk("%s", lvl);
/* dump buffer after the mark */
for (offset = mark; offset <= trace_shmem_base; offset += 0x8*4) {
for (offset = mark; offset < trace_shmem_base; offset += 0x8*4) {
for (word = 0; word < 8; word++)
data[word] = htonl(REG_RD(bp, offset + 4*word));
data[8] = 0x0;
......@@ -11685,9 +11702,6 @@ static int bnx2x_init_bp(struct bnx2x *bp)
static int bnx2x_open(struct net_device *dev)
{
struct bnx2x *bp = netdev_priv(dev);
bool global = false;
int other_engine = BP_PATH(bp) ? 0 : 1;
bool other_load_status, load_status;
int rc;
bp->stats_init = true;
......@@ -11703,6 +11717,10 @@ static int bnx2x_open(struct net_device *dev)
* Parity recovery is only relevant for PF driver.
*/
if (IS_PF(bp)) {
int other_engine = BP_PATH(bp) ? 0 : 1;
bool other_load_status, load_status;
bool global = false;
other_load_status = bnx2x_get_load_status(bp, other_engine);
load_status = bnx2x_get_load_status(bp, BP_PATH(bp));
if (!bnx2x_reset_is_done(bp, BP_PATH(bp)) ||
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment