Commit 1aa8fab2 authored by Matthew Wilcox's avatar Matthew Wilcox Committed by James Bottomley

[SCSI] Make scsi_scan_host work for drivers which find their own targets

If a driver can find its own targets, it can now fill in scan_finished and
(optionally) scan_start in the scsi_host_template.  Then, when it calls
scsi_scan_host(), it will be called back (from a thread if asynchronous
discovery is enabled), first to start the scan, and then at intervals to
check if the scan is completed.

Also make scsi_prep_async_scan and scsi_finish_async_scan static.
Signed-off-by: default avatarMatthew Wilcox <matthew@wil.cx>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@SteelEye.com>
parent 93b45af5
......@@ -1642,7 +1642,7 @@ static void scsi_sysfs_add_devices(struct Scsi_Host *shost)
* that other asynchronous scans started after this one won't affect the
* ordering of the discovered devices.
*/
struct async_scan_data *scsi_prep_async_scan(struct Scsi_Host *shost)
static struct async_scan_data *scsi_prep_async_scan(struct Scsi_Host *shost)
{
struct async_scan_data *data;
......@@ -1686,7 +1686,7 @@ struct async_scan_data *scsi_prep_async_scan(struct Scsi_Host *shost)
* This function announces all the devices it has found to the rest
* of the system.
*/
void scsi_finish_async_scan(struct async_scan_data *data)
static void scsi_finish_async_scan(struct async_scan_data *data)
{
struct Scsi_Host *shost;
......@@ -1719,12 +1719,25 @@ void scsi_finish_async_scan(struct async_scan_data *data)
kfree(data);
}
static int do_scan_async(void *_data)
static void do_scsi_scan_host(struct Scsi_Host *shost)
{
struct async_scan_data *data = _data;
scsi_scan_host_selected(data->shost, SCAN_WILD_CARD, SCAN_WILD_CARD,
if (shost->hostt->scan_finished) {
unsigned long start = jiffies;
if (shost->hostt->scan_start)
shost->hostt->scan_start(shost);
while (!shost->hostt->scan_finished(shost, jiffies - start))
msleep(10);
} else {
scsi_scan_host_selected(shost, SCAN_WILD_CARD, SCAN_WILD_CARD,
SCAN_WILD_CARD, 0);
}
}
static int do_scan_async(void *_data)
{
struct async_scan_data *data = _data;
do_scsi_scan_host(data->shost);
scsi_finish_async_scan(data);
return 0;
}
......@@ -1742,10 +1755,10 @@ void scsi_scan_host(struct Scsi_Host *shost)
data = scsi_prep_async_scan(shost);
if (!data) {
scsi_scan_host_selected(shost, SCAN_WILD_CARD, SCAN_WILD_CARD,
SCAN_WILD_CARD, 0);
do_scsi_scan_host(shost);
return;
}
kthread_run(do_scan_async, data, "scsi_scan_%d", shost->host_no);
}
EXPORT_SYMBOL(scsi_scan_host);
......
......@@ -240,6 +240,24 @@ struct scsi_host_template {
*/
void (* target_destroy)(struct scsi_target *);
/*
* If a host has the ability to discover targets on its own instead
* of scanning the entire bus, it can fill in this function and
* call scsi_scan_host(). This function will be called periodically
* until it returns 1 with the scsi_host and the elapsed time of
* the scan in jiffies.
*
* Status: OPTIONAL
*/
int (* scan_finished)(struct Scsi_Host *, unsigned long);
/*
* If the host wants to be called before the scan starts, but
* after the midlayer has set up ready for the scan, it can fill
* in this function.
*/
void (* scan_start)(struct Scsi_Host *);
/*
* fill in this function to allow the queue depth of this host
* to be changeable (on a per device basis). returns either
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment