Commit 1ad69b69 authored by Archit Taneja's avatar Archit Taneja Committed by Andy Gross

arm64: dts: apq8096-db820c: Add HDMI display support

The APQ8096 DB820c platform provides HDMI output. The MDSS block on
8x96 supports a direct HDMI out. Populate the MDSS, MDP and HDMI DT
nodes. Also, add the HDMI HPD and DDC pinctrl nodes with the bias
and driver strength specified for this platform.
Signed-off-by: default avatarArchit Taneja <architt@codeaurora.org>
Signed-off-by: default avatarSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: default avatarAndy Gross <agross@kernel.org>
parent 69cc3114
......@@ -62,4 +62,56 @@ config {
bias-disable;
};
};
hdmi_hpd_active: hdmi_hpd_active {
mux {
pins = "gpio34";
function = "hdmi_hot";
};
config {
pins = "gpio34";
bias-pull-down;
drive-strength = <16>;
};
};
hdmi_hpd_suspend: hdmi_hpd_suspend {
mux {
pins = "gpio34";
function = "hdmi_hot";
};
config {
pins = "gpio34";
bias-pull-down;
drive-strength = <2>;
};
};
hdmi_ddc_active: hdmi_ddc_active {
mux {
pins = "gpio32", "gpio33";
function = "hdmi_ddc";
};
config {
pins = "gpio32", "gpio33";
drive-strength = <2>;
bias-pull-up;
};
};
hdmi_ddc_suspend: hdmi_ddc_suspend {
mux {
pins = "gpio32", "gpio33";
function = "hdmi_ddc";
};
config {
pins = "gpio32", "gpio33";
drive-strength = <2>;
bias-pull-down;
};
};
};
......@@ -452,6 +452,33 @@ pcie@610000 {
perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>;
};
};
mdss@900000 {
status = "okay";
mdp@901000 {
status = "okay";
};
hdmi-phy@9a0600 {
status = "okay";
vddio-supply = <&pm8994_l12>;
vcca-supply = <&pm8994_l28>;
#phy-cells = <0>;
};
hdmi-tx@9a0000 {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
core-vdda-supply = <&pm8994_l12>;
core-vcc-supply = <&pm8994_s4>;
};
};
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment