Merge branch 'clockevents/3.17' of...

Merge branch 'clockevents/3.17' of git://git.linaro.org/people/daniel.lezcano/linux into timers/core

Pull clockevents from Danel Lezcano:
 * New timer driver for the Cirrus Logic CLPS711X SoC
 * New driver for the Mediatek SoC which includes:
 * A new function for of, acked by Rob Herring
 * Move the PXA driver to drivers/clocksource, add DT support
 * Optimization of the exynos_mct driver
 * DT support for the renesas timers family.
 * Some Kconfig and driver fixlets

Documentation/devicetree/bindings/timer/cirrus,clps711x-timer.txt

+* Cirrus Logic CLPS711X Timer Counter
+
+Required properties:
+- compatible: Shall contain "cirrus,clps711x-timer".
+- reg       : Address and length of the register set.
+- interrupts: The interrupt number of the timer.
+- clocks    : phandle of timer reference clock.
+
+Note: Each timer should have an alias correctly numbered in "aliases" node.
+
+Example:
+	aliases {
+		timer0 = &timer1;
+		timer1 = &timer2;
+	};
+
+	timer1: timer@80000300 {
+		compatible = "cirrus,ep7312-timer", "cirrus,clps711x-timer";
+		reg = <0x80000300 0x4>;
+		interrupts = <8>;
+		clocks = <&clks 5>;
+	};
+
+	timer2: timer@80000340 {
+		compatible = "cirrus,ep7312-timer", "cirrus,clps711x-timer";
+		reg = <0x80000340 0x4>;
+		interrupts = <9>;
+		clocks = <&clks 6>;
+	};

Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt

+Mediatek MT6577, MT6572 and MT6589 Timers
+---------------------------------------
+
+Required properties:
+- compatible: Should be "mediatek,mt6577-timer"
+- reg: Should contain location and length for timers register.
+- clocks: Clocks driving the timer hardware. This list should include two
+	clocks. The order is system clock and as second clock the RTC clock.
+
+Examples:
+
+	timer@10008000 {
+		compatible = "mediatek,mt6577-timer";
+		reg = <0x10008000 0x80>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&system_clk>, <&rtc_clk>;
+	};

Documentation/devicetree/bindings/timer/renesas,cmt.txt

+* Renesas R-Car Compare Match Timer (CMT)
+
+The CMT is a multi-channel 16/32/48-bit timer/counter with configurable clock
+inputs and programmable compare match.
+
+Channels share hardware resources but their counter and compare match value
+are independent. A particular CMT instance can implement only a subset of the
+channels supported by the CMT model. Channel indices represent the hardware
+position of the channel in the CMT and don't match the channel numbers in the
+datasheets.
+
+Required Properties:
+
+  - compatible: must contain one of the following.
+    - "renesas,cmt-32" for the 32-bit CMT
+		(CMT0 on sh7372, sh73a0 and r8a7740)
+    - "renesas,cmt-32-fast" for the 32-bit CMT with fast clock support
+		(CMT[234] on sh7372, sh73a0 and r8a7740)
+    - "renesas,cmt-48" for the 48-bit CMT
+		(CMT1 on sh7372, sh73a0 and r8a7740)
+    - "renesas,cmt-48-gen2" for the second generation 48-bit CMT
+		(CMT[01] on r8a73a4, r8a7790 and r8a7791)
+
+  - reg: base address and length of the registers block for the timer module.
+  - interrupts: interrupt-specifier for the timer, one per channel.
+  - clocks: a list of phandle + clock-specifier pairs, one for each entry
+    in clock-names.
+  - clock-names: must contain "fck" for the functional clock.
+
+  - renesas,channels-mask: bitmask of the available channels.
+
+
+Example: R8A7790 (R-Car H2) CMT0 node
+
+	CMT0 on R8A7790 implements hardware channels 5 and 6 only and names
+	them channels 0 and 1 in the documentation.
+
+	cmt0: timer@ffca0000 {
+		compatible = "renesas,cmt-48-gen2";
+		reg = <0 0xffca0000 0 0x1004>;
+		interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 142 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7790_CLK_CMT0>;
+		clock-names = "fck";
+
+		renesas,channels-mask = <0x60>;
+	};

Documentation/devicetree/bindings/timer/renesas,mtu2.txt

+* Renesas R-Car Multi-Function Timer Pulse Unit 2 (MTU2)
+
+The MTU2 is a multi-purpose, multi-channel timer/counter with configurable
+clock inputs and programmable compare match.
+
+Channels share hardware resources but their counter and compare match value
+are independent. The MTU2 hardware supports five channels indexed from 0 to 4.
+
+Required Properties:
+
+  - compatible: must contain "renesas,mtu2"
+
+  - reg: base address and length of the registers block for the timer module.
+
+  - interrupts: interrupt specifiers for the timer, one for each entry in
+    interrupt-names.
+  - interrupt-names: must contain one entry named "tgi?a" for each enabled
+    channel, where "?" is the channel index expressed as one digit from "0" to
+    "4".
+
+  - clocks: a list of phandle + clock-specifier pairs, one for each entry
+    in clock-names.
+  - clock-names: must contain "fck" for the functional clock.
+
+
+Example: R7S72100 (RZ/A1H) MTU2 node
+
+	mtu2: timer@fcff0000 {
+		compatible = "renesas,mtu2";
+		reg = <0xfcff0000 0x400>;
+		interrupts = <0 139 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 146 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 150 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 154 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 159 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tgi0a", "tgi1a", "tgi2a", "tgi3a", "tgi4a";
+		clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
+		clock-names = "fck";
+	};

Documentation/devicetree/bindings/timer/renesas,tmu.txt

+* Renesas R-Car Timer Unit (TMU)
+
+The TMU is a 32-bit timer/counter with configurable clock inputs and
+programmable compare match.
+
+Channels share hardware resources but their counter and compare match value
+are independent. The TMU hardware supports up to three channels.
+
+Required Properties:
+
+  - compatible: must contain "renesas,tmu"
+
+  - reg: base address and length of the registers block for the timer module.
+
+  - interrupts: interrupt-specifier for the timer, one per channel.
+
+  - clocks: a list of phandle + clock-specifier pairs, one for each entry
+    in clock-names.
+  - clock-names: must contain "fck" for the functional clock.
+
+Optional Properties:
+
+  - #renesas,channels: number of channels implemented by the timer, must be 2
+    or 3 (if not specified the value defaults to 3).
+
+
+Example: R8A7779 (R-Car H1) TMU0 node
+
+	tmu0: timer@ffd80000 {
+		compatible = "renesas,tmu";
+		reg = <0xffd80000 0x30>;
+		interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 34 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_TMU0>;
+		clock-names = "fck";
+
+		#renesas,channels = <3>;
+	};

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -77,6 +77,7 @@ lsi	LSI Corp. (LSI Logic)
 lltc	Linear Technology Corporation
 marvell	Marvell Technology Group Ltd.
 maxim	Maxim Integrated Products
+mediatek	MediaTek Inc.
 micrel	Micrel Inc.
 microchip	Microchip Technology Inc.
 mosaixtech	Mosaix Technologies, Inc.

arch/arm/Kconfig

@@ -634,6 +634,7 @@ config ARCH_PXA
 	select AUTO_ZRELADDR
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
+	select CLKSRC_OF
 	select GENERIC_CLOCKEVENTS
 	select GPIO_PXA
 	select HAVE_IDE

arch/arm/mach-pxa/Makefile

@@ -4,7 +4,7 @@
 
 # Common support (must be linked before board specific support)
 obj-y				+= clock.o devices.o generic.o irq.o \
-				   time.o reset.o
+				   reset.o
 obj-$(CONFIG_PM)		+= pm.o sleep.o standby.o
 
 # Generic drivers that other drivers may depend upon

arch/arm/mach-pxa/generic.c

@@ -25,11 +25,13 @@
 #include <asm/mach/map.h>
 #include <asm/mach-types.h>
 
+#include <mach/irqs.h>
 #include <mach/reset.h>
 #include <mach/smemc.h>
 #include <mach/pxa3xx-regs.h>
 
 #include "generic.h"
+#include <clocksource/pxa.h>
 
 void clear_reset_status(unsigned int mask)
 {
@@ -56,6 +58,15 @@ unsigned long get_clock_tick_rate(void)
 }
 EXPORT_SYMBOL(get_clock_tick_rate);
 
+/*
+ * For non device-tree builds, keep legacy timer init
+ */
+void pxa_timer_init(void)
+{
+	pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x40a00000),
+			    get_clock_tick_rate());
+}
+
 /*
  * Get the clock frequency as reflected by CCCR and the turbo flag.
  * We assume these values have been applied via a fcs.

drivers/clocksource/Kconfig

@@ -127,6 +127,7 @@ config CLKSRC_METAG_GENERIC
 
 config CLKSRC_EXYNOS_MCT
 	def_bool y if ARCH_EXYNOS
+	depends on !ARM64
 	help
 	  Support for Multi Core Timer controller on Exynos SoCs.
 
@@ -151,6 +152,11 @@ config VF_PIT_TIMER
 config SYS_SUPPORTS_SH_CMT
         bool
 
+config MTK_TIMER
+	select CLKSRC_OF
+	select CLKSRC_MMIO
+	bool
+
 config SYS_SUPPORTS_SH_MTU2
         bool
 
@@ -175,7 +181,7 @@ config SH_TIMER_MTU2
 	default SYS_SUPPORTS_SH_MTU2
 	help
 	  This enables build of a clockevent driver for the Multi-Function
-	  Timer Pulse Unit 2 (TMU2) hardware available on SoCs from Renesas.
+	  Timer Pulse Unit 2 (MTU2) hardware available on SoCs from Renesas.
 	  This hardware comes with 16 bit-timer registers.
 
 config SH_TIMER_TMU
@@ -189,7 +195,7 @@ config SH_TIMER_TMU
 
 config EM_TIMER_STI
 	bool "Renesas STI timer driver" if COMPILE_TEST
-	depends on GENERIC_CLOCKEVENTS
+	depends on GENERIC_CLOCKEVENTS && HAS_IOMEM
 	default SYS_SUPPORTS_EM_STI
 	help
 	  This enables build of a clocksource and clockevent driver for

drivers/clocksource/Makefile

@@ -16,9 +16,11 @@ obj-$(CONFIG_CLKSRC_DBX500_PRCMU)	+= clksrc-dbx500-prcmu.o
 obj-$(CONFIG_ARMADA_370_XP_TIMER)	+= time-armada-370-xp.o
 obj-$(CONFIG_ORION_TIMER)	+= time-orion.o
 obj-$(CONFIG_ARCH_BCM2835)	+= bcm2835_timer.o
+obj-$(CONFIG_ARCH_CLPS711X)	+= clps711x-timer.o
 obj-$(CONFIG_ARCH_MARCO)	+= timer-marco.o
 obj-$(CONFIG_ARCH_MOXART)	+= moxart_timer.o
 obj-$(CONFIG_ARCH_MXS)		+= mxs_timer.o
+obj-$(CONFIG_ARCH_PXA)		+= pxa_timer.o
 obj-$(CONFIG_ARCH_PRIMA2)	+= timer-prima2.o
 obj-$(CONFIG_ARCH_U300)		+= timer-u300.o
 obj-$(CONFIG_SUN4I_TIMER)	+= sun4i_timer.o
@@ -34,6 +36,7 @@ obj-$(CONFIG_CLKSRC_SAMSUNG_PWM)	+= samsung_pwm_timer.o
 obj-$(CONFIG_FSL_FTM_TIMER)	+= fsl_ftm_timer.o
 obj-$(CONFIG_VF_PIT_TIMER)	+= vf_pit_timer.o
 obj-$(CONFIG_CLKSRC_QCOM)	+= qcom-timer.o
+obj-$(CONFIG_MTK_TIMER)		+= mtk_timer.o
 
 obj-$(CONFIG_ARM_ARCH_TIMER)		+= arm_arch_timer.o
 obj-$(CONFIG_ARM_GLOBAL_TIMER)		+= arm_global_timer.o

drivers/clocksource/clps711x-timer.c

+/*
+ *  Cirrus Logic CLPS711X clocksource driver
+ *
+ *  Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+#include <linux/slab.h>
+
+enum {
+	CLPS711X_CLKSRC_CLOCKSOURCE,
+	CLPS711X_CLKSRC_CLOCKEVENT,
+};
+
+static void __iomem *tcd;
+
+static u64 notrace clps711x_sched_clock_read(void)
+{
+	return ~readw(tcd);
+}
+
+static int __init _clps711x_clksrc_init(struct clk *clock, void __iomem *base)
+{
+	unsigned long rate;
+
+	if (!base)
+		return -ENOMEM;
+	if (IS_ERR(clock))
+		return PTR_ERR(clock);
+
+	rate = clk_get_rate(clock);
+
+	tcd = base;
+
+	clocksource_mmio_init(tcd, "clps711x-clocksource", rate, 300, 16,
+			      clocksource_mmio_readw_down);
+
+	sched_clock_register(clps711x_sched_clock_read, 16, rate);
+
+	return 0;
+}
+
+static irqreturn_t clps711x_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static void clps711x_clockevent_set_mode(enum clock_event_mode mode,
+					 struct clock_event_device *evt)
+{
+}
+
+static int __init _clps711x_clkevt_init(struct clk *clock, void __iomem *base,
+					unsigned int irq)
+{
+	struct clock_event_device *clkevt;
+	unsigned long rate;
+
+	if (!irq)
+		return -EINVAL;
+	if (!base)
+		return -ENOMEM;
+	if (IS_ERR(clock))
+		return PTR_ERR(clock);
+
+	clkevt = kzalloc(sizeof(*clkevt), GFP_KERNEL);
+	if (!clkevt)
+		return -ENOMEM;
+
+	rate = clk_get_rate(clock);
+
+	/* Set Timer prescaler */
+	writew(DIV_ROUND_CLOSEST(rate, HZ), base);
+
+	clkevt->name = "clps711x-clockevent";
+	clkevt->rating = 300;
+	clkevt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_C3STOP;
+	clkevt->set_mode = clps711x_clockevent_set_mode;
+	clkevt->cpumask = cpumask_of(0);
+	clockevents_config_and_register(clkevt, HZ, 0, 0);
+
+	return request_irq(irq, clps711x_timer_interrupt, IRQF_TIMER,
+			   "clps711x-timer", clkevt);
+}
+
+void __init clps711x_clksrc_init(void __iomem *tc1_base, void __iomem *tc2_base,
+				 unsigned int irq)
+{
+	struct clk *tc1 = clk_get_sys("clps711x-timer.0", NULL);
+	struct clk *tc2 = clk_get_sys("clps711x-timer.1", NULL);
+
+	BUG_ON(_clps711x_clksrc_init(tc1, tc1_base));
+	BUG_ON(_clps711x_clkevt_init(tc2, tc2_base, irq));
+}
+
+#ifdef CONFIG_CLKSRC_OF
+static void __init clps711x_timer_init(struct device_node *np)
+{
+	unsigned int irq = irq_of_parse_and_map(np, 0);
+	struct clk *clock = of_clk_get(np, 0);
+	void __iomem *base = of_iomap(np, 0);
+
+	switch (of_alias_get_id(np, "timer")) {
+	case CLPS711X_CLKSRC_CLOCKSOURCE:
+		BUG_ON(_clps711x_clksrc_init(clock, base));
+		break;
+	case CLPS711X_CLKSRC_CLOCKEVENT:
+		BUG_ON(_clps711x_clkevt_init(clock, base, irq));
+		break;
+	default:
+		break;
+	}
+}
+CLOCKSOURCE_OF_DECLARE(clps711x, "cirrus,clps711x-timer", clps711x_timer_init);
+#endif

drivers/clocksource/exynos_mct.c

@@ -94,7 +94,7 @@ static void exynos4_mct_write(unsigned int value, unsigned long offset)
 	u32 mask;
 	u32 i;
 
-	__raw_writel(value, reg_base + offset);
+	writel_relaxed(value, reg_base + offset);
 
 	if (likely(offset >= EXYNOS4_MCT_L_BASE(0))) {
 		stat_addr = (offset & ~EXYNOS4_MCT_L_MASK) + MCT_L_WSTAT_OFFSET;
@@ -144,8 +144,8 @@ static void exynos4_mct_write(unsigned int value, unsigned long offset)
 
 	/* Wait maximum 1 ms until written values are applied */
 	for (i = 0; i < loops_per_jiffy / 1000 * HZ; i++)
-		if (__raw_readl(reg_base + stat_addr) & mask) {
-			__raw_writel(mask, reg_base + stat_addr);
+		if (readl_relaxed(reg_base + stat_addr) & mask) {
+			writel_relaxed(mask, reg_base + stat_addr);
 			return;
 		}
 
@@ -157,28 +157,51 @@ static void exynos4_mct_frc_start(void)
 {
 	u32 reg;
 
-	reg = __raw_readl(reg_base + EXYNOS4_MCT_G_TCON);
+	reg = readl_relaxed(reg_base + EXYNOS4_MCT_G_TCON);
 	reg |= MCT_G_TCON_START;
 	exynos4_mct_write(reg, EXYNOS4_MCT_G_TCON);
 }
 
-static cycle_t notrace _exynos4_frc_read(void)
+/**
+ * exynos4_read_count_64 - Read all 64-bits of the global counter
+ *
+ * This will read all 64-bits of the global counter taking care to make sure
+ * that the upper and lower half match.  Note that reading the MCT can be quite
+ * slow (hundreds of nanoseconds) so you should use the 32-bit (lower half
+ * only) version when possible.
+ *
+ * Returns the number of cycles in the global counter.
+ */
+static u64 exynos4_read_count_64(void)
 {
 	unsigned int lo, hi;
-	u32 hi2 = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_U);
+	u32 hi2 = readl_relaxed(reg_base + EXYNOS4_MCT_G_CNT_U);
 
 	do {
 		hi = hi2;
-		lo = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_L);
-		hi2 = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_U);
+		lo = readl_relaxed(reg_base + EXYNOS4_MCT_G_CNT_L);
+		hi2 = readl_relaxed(reg_base + EXYNOS4_MCT_G_CNT_U);
 	} while (hi != hi2);
 
 	return ((cycle_t)hi << 32) | lo;
 }
 
+/**
+ * exynos4_read_count_32 - Read the lower 32-bits of the global counter
+ *
+ * This will read just the lower 32-bits of the global counter.  This is marked
+ * as notrace so it can be used by the scheduler clock.
+ *
+ * Returns the number of cycles in the global counter (lower 32 bits).
+ */
+static u32 notrace exynos4_read_count_32(void)
+{
+	return readl_relaxed(reg_base + EXYNOS4_MCT_G_CNT_L);
+}
+
 static cycle_t exynos4_frc_read(struct clocksource *cs)
 {
-	return _exynos4_frc_read();
+	return exynos4_read_count_32();
 }
 
 static void exynos4_frc_resume(struct clocksource *cs)
@@ -190,21 +213,23 @@ struct clocksource mct_frc = {
 	.name		= "mct-frc",
 	.rating		= 400,
 	.read		= exynos4_frc_read,
-	.mask		= CLOCKSOURCE_MASK(64),
+	.mask		= CLOCKSOURCE_MASK(32),
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 	.resume		= exynos4_frc_resume,
 };
 
 static u64 notrace exynos4_read_sched_clock(void)
 {
-	return _exynos4_frc_read();
+	return exynos4_read_count_32();
 }
 
 static struct delay_timer exynos4_delay_timer;
 
 static cycles_t exynos4_read_current_timer(void)
 {
-	return _exynos4_frc_read();
+	BUILD_BUG_ON_MSG(sizeof(cycles_t) != sizeof(u32),
+			 "cycles_t needs to move to 32-bit for ARM64 usage");
+	return exynos4_read_count_32();
 }
 
 static void __init exynos4_clocksource_init(void)
@@ -218,14 +243,14 @@ static void __init exynos4_clocksource_init(void)
 	if (clocksource_register_hz(&mct_frc, clk_rate))
 		panic("%s: can't register clocksource\n", mct_frc.name);
 
-	sched_clock_register(exynos4_read_sched_clock, 64, clk_rate);
+	sched_clock_register(exynos4_read_sched_clock, 32, clk_rate);
 }
 
 static void exynos4_mct_comp0_stop(void)
 {
 	unsigned int tcon;
 
-	tcon = __raw_readl(reg_base + EXYNOS4_MCT_G_TCON);
+	tcon = readl_relaxed(reg_base + EXYNOS4_MCT_G_TCON);
 	tcon &= ~(MCT_G_TCON_COMP0_ENABLE | MCT_G_TCON_COMP0_AUTO_INC);
 
 	exynos4_mct_write(tcon, EXYNOS4_MCT_G_TCON);
@@ -238,14 +263,14 @@ static void exynos4_mct_comp0_start(enum clock_event_mode mode,
 	unsigned int tcon;
 	cycle_t comp_cycle;
 
-	tcon = __raw_readl(reg_base + EXYNOS4_MCT_G_TCON);
+	tcon = readl_relaxed(reg_base + EXYNOS4_MCT_G_TCON);
 
 	if (mode == CLOCK_EVT_MODE_PERIODIC) {
 		tcon |= MCT_G_TCON_COMP0_AUTO_INC;
 		exynos4_mct_write(cycles, EXYNOS4_MCT_G_COMP0_ADD_INCR);
 	}
 
-	comp_cycle = exynos4_frc_read(&mct_frc) + cycles;
+	comp_cycle = exynos4_read_count_64() + cycles;
 	exynos4_mct_write((u32)comp_cycle, EXYNOS4_MCT_G_COMP0_L);
 	exynos4_mct_write((u32)(comp_cycle >> 32), EXYNOS4_MCT_G_COMP0_U);
 
@@ -327,7 +352,7 @@ static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt)
 	unsigned long mask = MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START;
 	unsigned long offset = mevt->base + MCT_L_TCON_OFFSET;
 
-	tmp = __raw_readl(reg_base + offset);
+	tmp = readl_relaxed(reg_base + offset);
 	if (tmp & mask) {
 		tmp &= ~mask;
 		exynos4_mct_write(tmp, offset);
@@ -349,7 +374,7 @@ static void exynos4_mct_tick_start(unsigned long cycles,
 	/* enable MCT tick interrupt */
 	exynos4_mct_write(0x1, mevt->base + MCT_L_INT_ENB_OFFSET);
 
-	tmp = __raw_readl(reg_base + mevt->base + MCT_L_TCON_OFFSET);
+	tmp = readl_relaxed(reg_base + mevt->base + MCT_L_TCON_OFFSET);
 	tmp |= MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START |
 	       MCT_L_TCON_INTERVAL_MODE;
 	exynos4_mct_write(tmp, mevt->base + MCT_L_TCON_OFFSET);
@@ -401,7 +426,7 @@ static int exynos4_mct_tick_clear(struct mct_clock_event_device *mevt)
 		exynos4_mct_tick_stop(mevt);
 
 	/* Clear the MCT tick interrupt */
-	if (__raw_readl(reg_base + mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) {
+	if (readl_relaxed(reg_base + mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) {
 		exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
 		return 1;
 	} else {

drivers/clocksource/mtk_timer.c

+/*
+ * Mediatek SoCs General-Purpose Timer handling.
+ *
+ * Copyright (C) 2014 Matthias Brugger
+ *
+ * Matthias Brugger <matthias.bgg@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqreturn.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/slab.h>
+
+#define GPT_IRQ_EN_REG		0x00
+#define GPT_IRQ_ENABLE(val)	BIT((val) - 1)
+#define GPT_IRQ_ACK_REG		0x08
+#define GPT_IRQ_ACK(val)	BIT((val) - 1)
+
+#define TIMER_CTRL_REG(val)	(0x10 * (val))
+#define TIMER_CTRL_OP(val)	(((val) & 0x3) << 4)
+#define TIMER_CTRL_OP_ONESHOT	(0)
+#define TIMER_CTRL_OP_REPEAT	(1)
+#define TIMER_CTRL_OP_FREERUN	(3)
+#define TIMER_CTRL_CLEAR	(2)
+#define TIMER_CTRL_ENABLE	(1)
+#define TIMER_CTRL_DISABLE	(0)
+
+#define TIMER_CLK_REG(val)	(0x04 + (0x10 * (val)))
+#define TIMER_CLK_SRC(val)	(((val) & 0x1) << 4)
+#define TIMER_CLK_SRC_SYS13M	(0)
+#define TIMER_CLK_SRC_RTC32K	(1)
+#define TIMER_CLK_DIV1		(0x0)
+#define TIMER_CLK_DIV2		(0x1)
+
+#define TIMER_CNT_REG(val)	(0x08 + (0x10 * (val)))
+#define TIMER_CMP_REG(val)	(0x0C + (0x10 * (val)))
+
+#define GPT_CLK_EVT	1
+#define GPT_CLK_SRC	2
+
+struct mtk_clock_event_device {
+	void __iomem *gpt_base;
+	u32 ticks_per_jiffy;
+	struct clock_event_device dev;
+};
+
+static inline struct mtk_clock_event_device *to_mtk_clk(
+				struct clock_event_device *c)
+{
+	return container_of(c, struct mtk_clock_event_device, dev);
+}
+
+static void mtk_clkevt_time_stop(struct mtk_clock_event_device *evt, u8 timer)
+{
+	u32 val;
+
+	val = readl(evt->gpt_base + TIMER_CTRL_REG(timer));
+	writel(val & ~TIMER_CTRL_ENABLE, evt->gpt_base +
+			TIMER_CTRL_REG(timer));
+}
+
+static void mtk_clkevt_time_setup(struct mtk_clock_event_device *evt,
+				unsigned long delay, u8 timer)
+{
+	writel(delay, evt->gpt_base + TIMER_CMP_REG(timer));
+}
+
+static void mtk_clkevt_time_start(struct mtk_clock_event_device *evt,
+		bool periodic, u8 timer)
+{
+	u32 val;
+
+	/* Acknowledge interrupt */
+	writel(GPT_IRQ_ACK(timer), evt->gpt_base + GPT_IRQ_ACK_REG);
+
+	val = readl(evt->gpt_base + TIMER_CTRL_REG(timer));
+
+	/* Clear 2 bit timer operation mode field */
+	val &= ~TIMER_CTRL_OP(0x3);
+
+	if (periodic)
+		val |= TIMER_CTRL_OP(TIMER_CTRL_OP_REPEAT);
+	else
+		val |= TIMER_CTRL_OP(TIMER_CTRL_OP_ONESHOT);
+
+	writel(val | TIMER_CTRL_ENABLE | TIMER_CTRL_CLEAR,
+	       evt->gpt_base + TIMER_CTRL_REG(timer));
+}
+
+static void mtk_clkevt_mode(enum clock_event_mode mode,
+				struct clock_event_device *clk)
+{
+	struct mtk_clock_event_device *evt = to_mtk_clk(clk);
+
+	mtk_clkevt_time_stop(evt, GPT_CLK_EVT);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		mtk_clkevt_time_setup(evt, evt->ticks_per_jiffy, GPT_CLK_EVT);
+		mtk_clkevt_time_start(evt, true, GPT_CLK_EVT);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		/* Timer is enabled in set_next_event */
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	default:
+		/* No more interrupts will occur as source is disabled */
+		break;
+	}
+}
+
+static int mtk_clkevt_next_event(unsigned long event,
+				   struct clock_event_device *clk)
+{
+	struct mtk_clock_event_device *evt = to_mtk_clk(clk);
+
+	mtk_clkevt_time_stop(evt, GPT_CLK_EVT);
+	mtk_clkevt_time_setup(evt, event, GPT_CLK_EVT);
+	mtk_clkevt_time_start(evt, false, GPT_CLK_EVT);
+
+	return 0;
+}
+
+static irqreturn_t mtk_timer_interrupt(int irq, void *dev_id)
+{
+	struct mtk_clock_event_device *evt = dev_id;
+
+	/* Acknowledge timer0 irq */
+	writel(GPT_IRQ_ACK(GPT_CLK_EVT), evt->gpt_base + GPT_IRQ_ACK_REG);
+	evt->dev.event_handler(&evt->dev);
+
+	return IRQ_HANDLED;
+}
+
+static void mtk_timer_global_reset(struct mtk_clock_event_device *evt)
+{
+	/* Disable all interrupts */
+	writel(0x0, evt->gpt_base + GPT_IRQ_EN_REG);
+	/* Acknowledge all interrupts */
+	writel(0x3f, evt->gpt_base + GPT_IRQ_ACK_REG);
+}
+
+static void
+mtk_timer_setup(struct mtk_clock_event_device *evt, u8 timer, u8 option)
+{
+	writel(TIMER_CTRL_CLEAR | TIMER_CTRL_DISABLE,
+		evt->gpt_base + TIMER_CTRL_REG(timer));
+
+	writel(TIMER_CLK_SRC(TIMER_CLK_SRC_SYS13M) | TIMER_CLK_DIV1,
+			evt->gpt_base + TIMER_CLK_REG(timer));
+
+	writel(0x0, evt->gpt_base + TIMER_CMP_REG(timer));
+
+	writel(TIMER_CTRL_OP(option) | TIMER_CTRL_ENABLE,
+			evt->gpt_base + TIMER_CTRL_REG(timer));
+}
+
+static void mtk_timer_enable_irq(struct mtk_clock_event_device *evt, u8 timer)
+{
+	u32 val;
+
+	val = readl(evt->gpt_base + GPT_IRQ_EN_REG);
+	writel(val | GPT_IRQ_ENABLE(timer),
+			evt->gpt_base + GPT_IRQ_EN_REG);
+}
+
+static void __init mtk_timer_init(struct device_node *node)
+{
+	struct mtk_clock_event_device *evt;
+	struct resource res;
+	unsigned long rate = 0;
+	struct clk *clk;
+
+	evt = kzalloc(sizeof(*evt), GFP_KERNEL);
+	if (!evt) {
+		pr_warn("Can't allocate mtk clock event driver struct");
+		return;
+	}
+
+	evt->dev.name = "mtk_tick";
+	evt->dev.rating = 300;
+	evt->dev.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+	evt->dev.set_mode = mtk_clkevt_mode;
+	evt->dev.set_next_event = mtk_clkevt_next_event;
+	evt->dev.cpumask = cpu_possible_mask;
+
+	evt->gpt_base = of_io_request_and_map(node, 0, "mtk-timer");
+	if (IS_ERR(evt->gpt_base)) {
+		pr_warn("Can't get resource\n");
+		return;
+	}
+
+	evt->dev.irq = irq_of_parse_and_map(node, 0);
+	if (evt->dev.irq <= 0) {
+		pr_warn("Can't parse IRQ");
+		goto err_mem;
+	}
+
+	clk = of_clk_get(node, 0);
+	if (IS_ERR(clk)) {
+		pr_warn("Can't get timer clock");
+		goto err_irq;
+	}
+
+	if (clk_prepare_enable(clk)) {
+		pr_warn("Can't prepare clock");
+		goto err_clk_put;
+	}
+	rate = clk_get_rate(clk);
+
+	if (request_irq(evt->dev.irq, mtk_timer_interrupt,
+			IRQF_TIMER | IRQF_IRQPOLL, "mtk_timer", evt)) {
+		pr_warn("failed to setup irq %d\n", evt->dev.irq);
+		goto err_clk_disable;
+	}
+
+	evt->ticks_per_jiffy = DIV_ROUND_UP(rate, HZ);
+
+	mtk_timer_global_reset(evt);
+
+	/* Configure clock source */
+	mtk_timer_setup(evt, GPT_CLK_SRC, TIMER_CTRL_OP_FREERUN);
+	clocksource_mmio_init(evt->gpt_base + TIMER_CNT_REG(GPT_CLK_SRC),
+			node->name, rate, 300, 32, clocksource_mmio_readl_up);
+
+	/* Configure clock event */
+	mtk_timer_setup(evt, GPT_CLK_EVT, TIMER_CTRL_OP_REPEAT);
+	mtk_timer_enable_irq(evt, GPT_CLK_EVT);
+
+	clockevents_config_and_register(&evt->dev, rate, 0x3,
+					0xffffffff);
+	return;
+
+err_clk_disable:
+	clk_disable_unprepare(clk);
+err_clk_put:
+	clk_put(clk);
+err_irq:
+	irq_dispose_mapping(evt->dev.irq);
+err_mem:
+	iounmap(evt->gpt_base);
+	of_address_to_resource(node, 0, &res);
+	release_mem_region(res.start, resource_size(&res));
+}
+CLOCKSOURCE_OF_DECLARE(mtk_mt6577, "mediatek,mt6577-timer", mtk_timer_init);

arch/arm/mach-pxa/time.c → drivers/clocksource/pxa_timer.c

@@ -15,14 +15,30 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/clk.h>
 #include <linux/clockchips.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/sched_clock.h>
 
 #include <asm/div64.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <mach/regs-ost.h>
-#include <mach/irqs.h>
+
+#define OSMR0		0x00	/* OS Timer 0 Match Register */
+#define OSMR1		0x04	/* OS Timer 1 Match Register */
+#define OSMR2		0x08	/* OS Timer 2 Match Register */
+#define OSMR3		0x0C	/* OS Timer 3 Match Register */
+
+#define OSCR		0x10	/* OS Timer Counter Register */
+#define OSSR		0x14	/* OS Timer Status Register */
+#define OWER		0x18	/* OS Timer Watchdog Enable Register */
+#define OIER		0x1C	/* OS Timer Interrupt Enable Register */
+
+#define OSSR_M3		(1 << 3)	/* Match status channel 3 */
+#define OSSR_M2		(1 << 2)	/* Match status channel 2 */
+#define OSSR_M1		(1 << 1)	/* Match status channel 1 */
+#define OSSR_M0		(1 << 0)	/* Match status channel 0 */
+
+#define OIER_E0		(1 << 0)	/* Interrupt enable channel 0 */
 
 /*
  * This is PXA's sched_clock implementation. This has a resolution
@@ -33,9 +49,14 @@
  * calls to sched_clock() which should always be the case in practice.
  */
 
+#define timer_readl(reg) readl_relaxed(timer_base + (reg))
+#define timer_writel(val, reg) writel_relaxed((val), timer_base + (reg))
+
+static void __iomem *timer_base;
+
 static u64 notrace pxa_read_sched_clock(void)
 {
-	return readl_relaxed(OSCR);
+	return timer_readl(OSCR);
 }
 
 
@@ -47,8 +68,8 @@ pxa_ost0_interrupt(int irq, void *dev_id)
 	struct clock_event_device *c = dev_id;
 
 	/* Disarm the compare/match, signal the event. */
-	writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER);
-	writel_relaxed(OSSR_M0, OSSR);
+	timer_writel(timer_readl(OIER) & ~OIER_E0, OIER);
+	timer_writel(OSSR_M0, OSSR);
 	c->event_handler(c);
 
 	return IRQ_HANDLED;
@@ -59,10 +80,10 @@ pxa_osmr0_set_next_event(unsigned long delta, struct clock_event_device *dev)
 {
 	unsigned long next, oscr;
 
-	writel_relaxed(readl_relaxed(OIER) | OIER_E0, OIER);
-	next = readl_relaxed(OSCR) + delta;
-	writel_relaxed(next, OSMR0);
-	oscr = readl_relaxed(OSCR);
+	timer_writel(timer_readl(OIER) | OIER_E0, OIER);
+	next = timer_readl(OSCR) + delta;
+	timer_writel(next, OSMR0);
+	oscr = timer_readl(OSCR);
 
 	return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0;
 }
@@ -72,15 +93,15 @@ pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev)
 {
 	switch (mode) {
 	case CLOCK_EVT_MODE_ONESHOT:
-		writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER);
-		writel_relaxed(OSSR_M0, OSSR);
+		timer_writel(timer_readl(OIER) & ~OIER_E0, OIER);
+		timer_writel(OSSR_M0, OSSR);
 		break;
 
 	case CLOCK_EVT_MODE_UNUSED:
 	case CLOCK_EVT_MODE_SHUTDOWN:
 		/* initializing, released, or preparing for suspend */
-		writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER);
-		writel_relaxed(OSSR_M0, OSSR);
+		timer_writel(timer_readl(OIER) & ~OIER_E0, OIER);
+		timer_writel(OSSR_M0, OSSR);
 		break;
 
 	case CLOCK_EVT_MODE_RESUME:
@@ -94,12 +115,12 @@ static unsigned long osmr[4], oier, oscr;
 
 static void pxa_timer_suspend(struct clock_event_device *cedev)
 {
-	osmr[0] = readl_relaxed(OSMR0);
-	osmr[1] = readl_relaxed(OSMR1);
-	osmr[2] = readl_relaxed(OSMR2);
-	osmr[3] = readl_relaxed(OSMR3);
-	oier = readl_relaxed(OIER);
-	oscr = readl_relaxed(OSCR);
+	osmr[0] = timer_readl(OSMR0);
+	osmr[1] = timer_readl(OSMR1);
+	osmr[2] = timer_readl(OSMR2);
+	osmr[3] = timer_readl(OSMR3);
+	oier = timer_readl(OIER);
+	oscr = timer_readl(OSCR);
 }
 
 static void pxa_timer_resume(struct clock_event_device *cedev)
@@ -113,12 +134,12 @@ static void pxa_timer_resume(struct clock_event_device *cedev)
 	if (osmr[0] - oscr < MIN_OSCR_DELTA)
 		osmr[0] += MIN_OSCR_DELTA;
 
-	writel_relaxed(osmr[0], OSMR0);
-	writel_relaxed(osmr[1], OSMR1);
-	writel_relaxed(osmr[2], OSMR2);
-	writel_relaxed(osmr[3], OSMR3);
-	writel_relaxed(oier, OIER);
-	writel_relaxed(oscr, OSCR);
+	timer_writel(osmr[0], OSMR0);
+	timer_writel(osmr[1], OSMR1);
+	timer_writel(osmr[2], OSMR2);
+	timer_writel(osmr[3], OSMR3);
+	timer_writel(oier, OIER);
+	timer_writel(oscr, OSCR);
 }
 #else
 #define pxa_timer_suspend NULL
@@ -142,21 +163,65 @@ static struct irqaction pxa_ost0_irq = {
 	.dev_id		= &ckevt_pxa_osmr0,
 };
 
-void __init pxa_timer_init(void)
+static void pxa_timer_common_init(int irq, unsigned long clock_tick_rate)
 {
-	unsigned long clock_tick_rate = get_clock_tick_rate();
-
-	writel_relaxed(0, OIER);
-	writel_relaxed(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR);
+	timer_writel(0, OIER);
+	timer_writel(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR);
 
 	sched_clock_register(pxa_read_sched_clock, 32, clock_tick_rate);
 
 	ckevt_pxa_osmr0.cpumask = cpumask_of(0);
 
-	setup_irq(IRQ_OST0, &pxa_ost0_irq);
+	setup_irq(irq, &pxa_ost0_irq);
 
-	clocksource_mmio_init(OSCR, "oscr0", clock_tick_rate, 200, 32,
-		clocksource_mmio_readl_up);
+	clocksource_mmio_init(timer_base + OSCR, "oscr0", clock_tick_rate, 200,
+			      32, clocksource_mmio_readl_up);
 	clockevents_config_and_register(&ckevt_pxa_osmr0, clock_tick_rate,
-		MIN_OSCR_DELTA * 2, 0x7fffffff);
+					MIN_OSCR_DELTA * 2, 0x7fffffff);
+}
+
+static void __init pxa_timer_dt_init(struct device_node *np)
+{
+	struct clk *clk;
+	int irq;
+
+	/* timer registers are shared with watchdog timer */
+	timer_base = of_iomap(np, 0);
+	if (!timer_base)
+		panic("%s: unable to map resource\n", np->name);
+
+	clk = of_clk_get(np, 0);
+	if (IS_ERR(clk)) {
+		pr_crit("%s: unable to get clk\n", np->name);
+		return;
+	}
+	clk_prepare_enable(clk);
+
+	/* we are only interested in OS-timer0 irq */
+	irq = irq_of_parse_and_map(np, 0);
+	if (irq <= 0) {
+		pr_crit("%s: unable to parse OS-timer0 irq\n", np->name);
+		return;
+	}
+
+	pxa_timer_common_init(irq, clk_get_rate(clk));
+}
+CLOCKSOURCE_OF_DECLARE(pxa_timer, "marvell,pxa-timer", pxa_timer_dt_init);
+
+/*
+ * Legacy timer init for non device-tree boards.
+ */
+void __init pxa_timer_nodt_init(int irq, void __iomem *base,
+	unsigned long clock_tick_rate)
+{
+	struct clk *clk;
+
+	timer_base = base;
+	clk = clk_get(NULL, "OSTIMER0");
+	if (clk && !IS_ERR(clk))
+		clk_prepare_enable(clk);
+	else
+		pr_crit("%s: unable to get clk\n", __func__);
+
+	pxa_timer_common_init(irq, clock_tick_rate);
 }

drivers/clocksource/sh_mtu2.c

@@ -23,6 +23,7 @@
 #include <linux/ioport.h>
 #include <linux/irq.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pm_domain.h>
 #include <linux/pm_runtime.h>
@@ -37,7 +38,6 @@ struct sh_mtu2_channel {
 	unsigned int index;
 
 	void __iomem *base;
-	int irq;
 
 	struct clock_event_device ced;
 };
@@ -48,15 +48,14 @@ struct sh_mtu2_device {
 	void __iomem *mapbase;
 	struct clk *clk;
 
+	raw_spinlock_t lock; /* Protect the shared registers */
+
 	struct sh_mtu2_channel *channels;
 	unsigned int num_channels;
 
-	bool legacy;
 	bool has_clockevent;
 };
 
-static DEFINE_RAW_SPINLOCK(sh_mtu2_lock);
-
 #define TSTR -1 /* shared register */
 #define TCR  0 /* channel register */
 #define TMDR 1 /* channel register */
@@ -162,12 +161,8 @@ static inline unsigned long sh_mtu2_read(struct sh_mtu2_channel *ch, int reg_nr)
 {
 	unsigned long offs;
 
-	if (reg_nr == TSTR) {
-		if (ch->mtu->legacy)
-			return ioread8(ch->mtu->mapbase);
-		else
-			return ioread8(ch->mtu->mapbase + 0x280);
-	}
+	if (reg_nr == TSTR)
+		return ioread8(ch->mtu->mapbase + 0x280);
 
 	offs = mtu2_reg_offs[reg_nr];
 
@@ -182,12 +177,8 @@ static inline void sh_mtu2_write(struct sh_mtu2_channel *ch, int reg_nr,
 {
 	unsigned long offs;
 
-	if (reg_nr == TSTR) {
-		if (ch->mtu->legacy)
-			return iowrite8(value, ch->mtu->mapbase);
-		else
-			return iowrite8(value, ch->mtu->mapbase + 0x280);
-	}
+	if (reg_nr == TSTR)
+		return iowrite8(value, ch->mtu->mapbase + 0x280);
 
 	offs = mtu2_reg_offs[reg_nr];
 
@@ -202,7 +193,7 @@ static void sh_mtu2_start_stop_ch(struct sh_mtu2_channel *ch, int start)
 	unsigned long flags, value;
 
 	/* start stop register shared by multiple timer channels */
-	raw_spin_lock_irqsave(&sh_mtu2_lock, flags);
+	raw_spin_lock_irqsave(&ch->mtu->lock, flags);
 	value = sh_mtu2_read(ch, TSTR);
 
 	if (start)
@@ -211,7 +202,7 @@ static void sh_mtu2_start_stop_ch(struct sh_mtu2_channel *ch, int start)
 		value &= ~(1 << ch->index);
 
 	sh_mtu2_write(ch, TSTR, value);
-	raw_spin_unlock_irqrestore(&sh_mtu2_lock, flags);
+	raw_spin_unlock_irqrestore(&ch->mtu->lock, flags);
 }
 
 static int sh_mtu2_enable(struct sh_mtu2_channel *ch)
@@ -331,7 +322,6 @@ static void sh_mtu2_register_clockevent(struct sh_mtu2_channel *ch,
 					const char *name)
 {
 	struct clock_event_device *ced = &ch->ced;
-	int ret;
 
 	ced->name = name;
 	ced->features = CLOCK_EVT_FEAT_PERIODIC;
@@ -344,24 +334,12 @@ static void sh_mtu2_register_clockevent(struct sh_mtu2_channel *ch,
 	dev_info(&ch->mtu->pdev->dev, "ch%u: used for clock events\n",
 		 ch->index);
 	clockevents_register_device(ced);
-
-	ret = request_irq(ch->irq, sh_mtu2_interrupt,
-			  IRQF_TIMER | IRQF_IRQPOLL | IRQF_NOBALANCING,
-			  dev_name(&ch->mtu->pdev->dev), ch);
-	if (ret) {
-		dev_err(&ch->mtu->pdev->dev, "ch%u: failed to request irq %d\n",
-			ch->index, ch->irq);
-		return;
-	}
 }
 
-static int sh_mtu2_register(struct sh_mtu2_channel *ch, const char *name,
-			    bool clockevent)
+static int sh_mtu2_register(struct sh_mtu2_channel *ch, const char *name)
 {
-	if (clockevent) {
-		ch->mtu->has_clockevent = true;
-		sh_mtu2_register_clockevent(ch, name);
-	}
+	ch->mtu->has_clockevent = true;
+	sh_mtu2_register_clockevent(ch, name);
 
 	return 0;
 }
@@ -372,40 +350,32 @@ static int sh_mtu2_setup_channel(struct sh_mtu2_channel *ch, unsigned int index,
 	static const unsigned int channel_offsets[] = {
 		0x300, 0x380, 0x000,
 	};
-	bool clockevent;
+	char name[6];
+	int irq;
+	int ret;
 
 	ch->mtu = mtu;
 
-	if (mtu->legacy) {
-		struct sh_timer_config *cfg = mtu->pdev->dev.platform_data;
-
-		clockevent = cfg->clockevent_rating != 0;
-
-		ch->irq = platform_get_irq(mtu->pdev, 0);
-		ch->base = mtu->mapbase - cfg->channel_offset;
-		ch->index = cfg->timer_bit;
-	} else {
-		char name[6];
-
-		clockevent = true;
-
-		sprintf(name, "tgi%ua", index);
-		ch->irq = platform_get_irq_byname(mtu->pdev, name);
-		ch->base = mtu->mapbase + channel_offsets[index];
-		ch->index = index;
-	}
-
-	if (ch->irq < 0) {
+	sprintf(name, "tgi%ua", index);
+	irq = platform_get_irq_byname(mtu->pdev, name);
+	if (irq < 0) {
 		/* Skip channels with no declared interrupt. */
-		if (!mtu->legacy)
-			return 0;
+		return 0;
+	}
 
-		dev_err(&mtu->pdev->dev, "ch%u: failed to get irq\n",
-			ch->index);
-		return ch->irq;
+	ret = request_irq(irq, sh_mtu2_interrupt,
+			  IRQF_TIMER | IRQF_IRQPOLL | IRQF_NOBALANCING,
+			  dev_name(&ch->mtu->pdev->dev), ch);
+	if (ret) {
+		dev_err(&ch->mtu->pdev->dev, "ch%u: failed to request irq %d\n",
+			index, irq);
+		return ret;
 	}
 
-	return sh_mtu2_register(ch, dev_name(&mtu->pdev->dev), clockevent);
+	ch->base = mtu->mapbase + channel_offsets[index];
+	ch->index = index;
+
+	return sh_mtu2_register(ch, dev_name(&mtu->pdev->dev));
 }
 
 static int sh_mtu2_map_memory(struct sh_mtu2_device *mtu)
@@ -422,46 +392,21 @@ static int sh_mtu2_map_memory(struct sh_mtu2_device *mtu)
 	if (mtu->mapbase == NULL)
 		return -ENXIO;
 
-	/*
-	 * In legacy platform device configuration (with one device per channel)
-	 * the resource points to the channel base address.
-	 */
-	if (mtu->legacy) {
-		struct sh_timer_config *cfg = mtu->pdev->dev.platform_data;
-		mtu->mapbase += cfg->channel_offset;
-	}
-
 	return 0;
 }
 
-static void sh_mtu2_unmap_memory(struct sh_mtu2_device *mtu)
-{
-	if (mtu->legacy) {
-		struct sh_timer_config *cfg = mtu->pdev->dev.platform_data;
-		mtu->mapbase -= cfg->channel_offset;
-	}
-
-	iounmap(mtu->mapbase);
-}
-
 static int sh_mtu2_setup(struct sh_mtu2_device *mtu,
 			 struct platform_device *pdev)
 {
-	struct sh_timer_config *cfg = pdev->dev.platform_data;
-	const struct platform_device_id *id = pdev->id_entry;
 	unsigned int i;
 	int ret;
 
 	mtu->pdev = pdev;
-	mtu->legacy = id->driver_data;
 
-	if (mtu->legacy && !cfg) {
-		dev_err(&mtu->pdev->dev, "missing platform data\n");
-		return -ENXIO;
-	}
+	raw_spin_lock_init(&mtu->lock);
 
 	/* Get hold of clock. */
-	mtu->clk = clk_get(&mtu->pdev->dev, mtu->legacy ? "mtu2_fck" : "fck");
+	mtu->clk = clk_get(&mtu->pdev->dev, "fck");
 	if (IS_ERR(mtu->clk)) {
 		dev_err(&mtu->pdev->dev, "cannot get clock\n");
 		return PTR_ERR(mtu->clk);
@@ -479,10 +424,7 @@ static int sh_mtu2_setup(struct sh_mtu2_device *mtu,
 	}
 
 	/* Allocate and setup the channels. */
-	if (mtu->legacy)
-		mtu->num_channels = 1;
-	else
-		mtu->num_channels = 3;
+	mtu->num_channels = 3;
 
 	mtu->channels = kzalloc(sizeof(*mtu->channels) * mtu->num_channels,
 				GFP_KERNEL);
@@ -491,16 +433,10 @@ static int sh_mtu2_setup(struct sh_mtu2_device *mtu,
 		goto err_unmap;
 	}
 
-	if (mtu->legacy) {
-		ret = sh_mtu2_setup_channel(&mtu->channels[0], 0, mtu);
+	for (i = 0; i < mtu->num_channels; ++i) {
+		ret = sh_mtu2_setup_channel(&mtu->channels[i], i, mtu);
 		if (ret < 0)
 			goto err_unmap;
-	} else {
-		for (i = 0; i < mtu->num_channels; ++i) {
-			ret = sh_mtu2_setup_channel(&mtu->channels[i], i, mtu);
-			if (ret < 0)
-				goto err_unmap;
-		}
 	}
 
 	platform_set_drvdata(pdev, mtu);
@@ -509,7 +445,7 @@ static int sh_mtu2_setup(struct sh_mtu2_device *mtu,
 
 err_unmap:
 	kfree(mtu->channels);
-	sh_mtu2_unmap_memory(mtu);
+	iounmap(mtu->mapbase);
 err_clk_unprepare:
 	clk_unprepare(mtu->clk);
 err_clk_put:
@@ -560,17 +496,23 @@ static int sh_mtu2_remove(struct platform_device *pdev)
 }
 
 static const struct platform_device_id sh_mtu2_id_table[] = {
-	{ "sh_mtu2", 1 },
 	{ "sh-mtu2", 0 },
 	{ },
 };
 MODULE_DEVICE_TABLE(platform, sh_mtu2_id_table);
 
+static const struct of_device_id sh_mtu2_of_table[] __maybe_unused = {
+	{ .compatible = "renesas,mtu2" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sh_mtu2_of_table);
+
 static struct platform_driver sh_mtu2_device_driver = {
 	.probe		= sh_mtu2_probe,
 	.remove		= sh_mtu2_remove,
 	.driver		= {
 		.name	= "sh_mtu2",
+		.of_match_table = of_match_ptr(sh_mtu2_of_table),
 	},
 	.id_table	= sh_mtu2_id_table,
 };

drivers/clocksource/sh_tmu.c

@@ -24,6 +24,7 @@
 #include <linux/ioport.h>
 #include <linux/irq.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pm_domain.h>
 #include <linux/pm_runtime.h>
@@ -32,7 +33,6 @@
 #include <linux/spinlock.h>
 
 enum sh_tmu_model {
-	SH_TMU_LEGACY,
 	SH_TMU,
 	SH_TMU_SH3,
 };
@@ -62,6 +62,8 @@ struct sh_tmu_device {
 
 	enum sh_tmu_model model;
 
+	raw_spinlock_t lock; /* Protect the shared start/stop register */
+
 	struct sh_tmu_channel *channels;
 	unsigned int num_channels;
 
@@ -69,8 +71,6 @@ struct sh_tmu_device {
 	bool has_clocksource;
 };
 
-static DEFINE_RAW_SPINLOCK(sh_tmu_lock);
-
 #define TSTR -1 /* shared register */
 #define TCOR  0 /* channel register */
 #define TCNT 1 /* channel register */
@@ -91,8 +91,6 @@ static inline unsigned long sh_tmu_read(struct sh_tmu_channel *ch, int reg_nr)
 
 	if (reg_nr == TSTR) {
 		switch (ch->tmu->model) {
-		case SH_TMU_LEGACY:
-			return ioread8(ch->tmu->mapbase);
 		case SH_TMU_SH3:
 			return ioread8(ch->tmu->mapbase + 2);
 		case SH_TMU:
@@ -115,8 +113,6 @@ static inline void sh_tmu_write(struct sh_tmu_channel *ch, int reg_nr,
 
 	if (reg_nr == TSTR) {
 		switch (ch->tmu->model) {
-		case SH_TMU_LEGACY:
-			return iowrite8(value, ch->tmu->mapbase);
 		case SH_TMU_SH3:
 			return iowrite8(value, ch->tmu->mapbase + 2);
 		case SH_TMU:
@@ -137,7 +133,7 @@ static void sh_tmu_start_stop_ch(struct sh_tmu_channel *ch, int start)
 	unsigned long flags, value;
 
 	/* start stop register shared by multiple timer channels */
-	raw_spin_lock_irqsave(&sh_tmu_lock, flags);
+	raw_spin_lock_irqsave(&ch->tmu->lock, flags);
 	value = sh_tmu_read(ch, TSTR);
 
 	if (start)
@@ -146,7 +142,7 @@ static void sh_tmu_start_stop_ch(struct sh_tmu_channel *ch, int start)
 		value &= ~(1 << ch->index);
 
 	sh_tmu_write(ch, TSTR, value);
-	raw_spin_unlock_irqrestore(&sh_tmu_lock, flags);
+	raw_spin_unlock_irqrestore(&ch->tmu->lock, flags);
 }
 
 static int __sh_tmu_enable(struct sh_tmu_channel *ch)
@@ -476,27 +472,12 @@ static int sh_tmu_channel_setup(struct sh_tmu_channel *ch, unsigned int index,
 		return 0;
 
 	ch->tmu = tmu;
+	ch->index = index;
 
-	if (tmu->model == SH_TMU_LEGACY) {
-		struct sh_timer_config *cfg = tmu->pdev->dev.platform_data;
-
-		/*
-		 * The SH3 variant (SH770x, SH7705, SH7710 and SH7720) maps
-		 * channel registers blocks at base + 2 + 12 * index, while all
-		 * other variants map them at base + 4 + 12 * index. We can
-		 * compute the index by just dividing by 12, the 2 bytes or 4
-		 * bytes offset being hidden by the integer division.
-		 */
-		ch->index = cfg->channel_offset / 12;
-		ch->base = tmu->mapbase + cfg->channel_offset;
-	} else {
-		ch->index = index;
-
-		if (tmu->model == SH_TMU_SH3)
-			ch->base = tmu->mapbase + 4 + ch->index * 12;
-		else
-			ch->base = tmu->mapbase + 8 + ch->index * 12;
-	}
+	if (tmu->model == SH_TMU_SH3)
+		ch->base = tmu->mapbase + 4 + ch->index * 12;
+	else
+		ch->base = tmu->mapbase + 8 + ch->index * 12;
 
 	ch->irq = platform_get_irq(tmu->pdev, index);
 	if (ch->irq < 0) {
@@ -526,46 +507,53 @@ static int sh_tmu_map_memory(struct sh_tmu_device *tmu)
 	if (tmu->mapbase == NULL)
 		return -ENXIO;
 
-	/*
-	 * In legacy platform device configuration (with one device per channel)
-	 * the resource points to the channel base address.
-	 */
-	if (tmu->model == SH_TMU_LEGACY) {
-		struct sh_timer_config *cfg = tmu->pdev->dev.platform_data;
-		tmu->mapbase -= cfg->channel_offset;
-	}
-
 	return 0;
 }
 
-static void sh_tmu_unmap_memory(struct sh_tmu_device *tmu)
+static int sh_tmu_parse_dt(struct sh_tmu_device *tmu)
 {
-	if (tmu->model == SH_TMU_LEGACY) {
-		struct sh_timer_config *cfg = tmu->pdev->dev.platform_data;
-		tmu->mapbase += cfg->channel_offset;
+	struct device_node *np = tmu->pdev->dev.of_node;
+
+	tmu->model = SH_TMU;
+	tmu->num_channels = 3;
+
+	of_property_read_u32(np, "#renesas,channels", &tmu->num_channels);
+
+	if (tmu->num_channels != 2 && tmu->num_channels != 3) {
+		dev_err(&tmu->pdev->dev, "invalid number of channels %u\n",
+			tmu->num_channels);
+		return -EINVAL;
 	}
 
-	iounmap(tmu->mapbase);
+	return 0;
 }
 
 static int sh_tmu_setup(struct sh_tmu_device *tmu, struct platform_device *pdev)
 {
-	struct sh_timer_config *cfg = pdev->dev.platform_data;
-	const struct platform_device_id *id = pdev->id_entry;
 	unsigned int i;
 	int ret;
 
-	if (!cfg) {
+	tmu->pdev = pdev;
+
+	raw_spin_lock_init(&tmu->lock);
+
+	if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) {
+		ret = sh_tmu_parse_dt(tmu);
+		if (ret < 0)
+			return ret;
+	} else if (pdev->dev.platform_data) {
+		const struct platform_device_id *id = pdev->id_entry;
+		struct sh_timer_config *cfg = pdev->dev.platform_data;
+
+		tmu->model = id->driver_data;
+		tmu->num_channels = hweight8(cfg->channels_mask);
+	} else {
 		dev_err(&tmu->pdev->dev, "missing platform data\n");
 		return -ENXIO;
 	}
 
-	tmu->pdev = pdev;
-	tmu->model = id->driver_data;
-
 	/* Get hold of clock. */
-	tmu->clk = clk_get(&tmu->pdev->dev,
-			   tmu->model == SH_TMU_LEGACY ? "tmu_fck" : "fck");
+	tmu->clk = clk_get(&tmu->pdev->dev, "fck");
 	if (IS_ERR(tmu->clk)) {
 		dev_err(&tmu->pdev->dev, "cannot get clock\n");
 		return PTR_ERR(tmu->clk);
@@ -583,11 +571,6 @@ static int sh_tmu_setup(struct sh_tmu_device *tmu, struct platform_device *pdev)
 	}
 
 	/* Allocate and setup the channels. */
-	if (tmu->model == SH_TMU_LEGACY)
-		tmu->num_channels = 1;
-	else
-		tmu->num_channels = hweight8(cfg->channels_mask);
-
 	tmu->channels = kzalloc(sizeof(*tmu->channels) * tmu->num_channels,
 				GFP_KERNEL);
 	if (tmu->channels == NULL) {
@@ -595,23 +578,15 @@ static int sh_tmu_setup(struct sh_tmu_device *tmu, struct platform_device *pdev)
 		goto err_unmap;
 	}
 
-	if (tmu->model == SH_TMU_LEGACY) {
-		ret = sh_tmu_channel_setup(&tmu->channels[0], 0,
-					   cfg->clockevent_rating != 0,
-					   cfg->clocksource_rating != 0, tmu);
+	/*
+	 * Use the first channel as a clock event device and the second channel
+	 * as a clock source.
+	 */
+	for (i = 0; i < tmu->num_channels; ++i) {
+		ret = sh_tmu_channel_setup(&tmu->channels[i], i,
+					   i == 0, i == 1, tmu);
 		if (ret < 0)
 			goto err_unmap;
-	} else {
-		/*
-		 * Use the first channel as a clock event device and the second
-		 * channel as a clock source.
-		 */
-		for (i = 0; i < tmu->num_channels; ++i) {
-			ret = sh_tmu_channel_setup(&tmu->channels[i], i,
-						   i == 0, i == 1, tmu);
-			if (ret < 0)
-				goto err_unmap;
-		}
 	}
 
 	platform_set_drvdata(pdev, tmu);
@@ -620,7 +595,7 @@ static int sh_tmu_setup(struct sh_tmu_device *tmu, struct platform_device *pdev)
 
 err_unmap:
 	kfree(tmu->channels);
-	sh_tmu_unmap_memory(tmu);
+	iounmap(tmu->mapbase);
 err_clk_unprepare:
 	clk_unprepare(tmu->clk);
 err_clk_put:
@@ -671,18 +646,24 @@ static int sh_tmu_remove(struct platform_device *pdev)
 }
 
 static const struct platform_device_id sh_tmu_id_table[] = {
-	{ "sh_tmu", SH_TMU_LEGACY },
 	{ "sh-tmu", SH_TMU },
 	{ "sh-tmu-sh3", SH_TMU_SH3 },
 	{ }
 };
 MODULE_DEVICE_TABLE(platform, sh_tmu_id_table);
 
+static const struct of_device_id sh_tmu_of_table[] __maybe_unused = {
+	{ .compatible = "renesas,tmu" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sh_tmu_of_table);
+
 static struct platform_driver sh_tmu_device_driver = {
 	.probe		= sh_tmu_probe,
 	.remove		= sh_tmu_remove,
 	.driver		= {
 		.name	= "sh_tmu",
+		.of_match_table = of_match_ptr(sh_tmu_of_table),
 	},
 	.id_table	= sh_tmu_id_table,
 };

drivers/clocksource/timer-marco.c

@@ -260,6 +260,9 @@ static void __init sirfsoc_marco_timer_init(struct device_node *np)
 
 	clk = of_clk_get(np, 0);
 	BUG_ON(IS_ERR(clk));
+
+	BUG_ON(clk_prepare_enable(clk));
+
 	rate = clk_get_rate(clk);
 
 	BUG_ON(rate < MARCO_CLOCK_FREQ);

drivers/clocksource/timer-prima2.c

@@ -200,6 +200,9 @@ static void __init sirfsoc_prima2_timer_init(struct device_node *np)
 
 	clk = of_clk_get(np, 0);
 	BUG_ON(IS_ERR(clk));
+
+	BUG_ON(clk_prepare_enable(clk));
+
 	rate = clk_get_rate(clk);
 
 	BUG_ON(rate < PRIMA2_CLOCK_FREQ);

drivers/of/address.c

@@ -702,6 +702,42 @@ void __iomem *of_iomap(struct device_node *np, int index)
 }
 EXPORT_SYMBOL(of_iomap);
 
+/*
+ * of_io_request_and_map - Requests a resource and maps the memory mapped IO
+ *			   for a given device_node
+ * @device:	the device whose io range will be mapped
+ * @index:	index of the io range
+ * @name:	name of the resource
+ *
+ * Returns a pointer to the requested and mapped memory or an ERR_PTR() encoded
+ * error code on failure. Usage example:
+ *
+ *	base = of_io_request_and_map(node, 0, "foo");
+ *	if (IS_ERR(base))
+ *		return PTR_ERR(base);
+ */
+void __iomem *of_io_request_and_map(struct device_node *np, int index,
+					char *name)
+{
+	struct resource res;
+	void __iomem *mem;
+
+	if (of_address_to_resource(np, index, &res))
+		return IOMEM_ERR_PTR(-EINVAL);
+
+	if (!request_mem_region(res.start, resource_size(&res), name))
+		return IOMEM_ERR_PTR(-EBUSY);
+
+	mem = ioremap(res.start, resource_size(&res));
+	if (!mem) {
+		release_mem_region(res.start, resource_size(&res));
+		return IOMEM_ERR_PTR(-ENOMEM);
+	}
+
+	return mem;
+}
+EXPORT_SYMBOL(of_io_request_and_map);
+
 /**
  * of_dma_get_range - Get DMA range info
  * @np:		device node to get DMA range info

include/clocksource/pxa.h

+/*
+ * PXA clocksource, clockevents, and OST interrupt handlers.
+ *
+ * Copyright (C) 2014 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ */
+
+#ifndef _CLOCKSOURCE_PXA_H
+#define _CLOCKSOURCE_PXA_H
+
+extern void pxa_timer_nodt_init(int irq, void __iomem *base,
+			   unsigned long clock_tick_rate);
+
+#endif

include/linux/io.h

@@ -58,6 +58,8 @@ static inline void devm_ioport_unmap(struct device *dev, void __iomem *addr)
 }
 #endif
 
+#define IOMEM_ERR_PTR(err) (__force void __iomem *)ERR_PTR(err)
+
 void __iomem *devm_ioremap(struct device *dev, resource_size_t offset,
 			    unsigned long size);
 void __iomem *devm_ioremap_nocache(struct device *dev, resource_size_t offset,

include/linux/of_address.h

@@ -109,7 +109,12 @@ static inline bool of_dma_is_coherent(struct device_node *np)
 extern int of_address_to_resource(struct device_node *dev, int index,
 				  struct resource *r);
 void __iomem *of_iomap(struct device_node *node, int index);
+void __iomem *of_io_request_and_map(struct device_node *device,
+					int index, char *name);
 #else
+
+#include <linux/io.h>
+
 static inline int of_address_to_resource(struct device_node *dev, int index,
 					 struct resource *r)
 {
@@ -120,6 +125,12 @@ static inline void __iomem *of_iomap(struct device_node *device, int index)
 {
 	return NULL;
 }
+
+static inline void __iomem *of_io_request_and_map(struct device_node *device,
+					int index, char *name)
+{
+	return IOMEM_ERR_PTR(-EINVAL);
+}
 #endif
 
 #if defined(CONFIG_OF_ADDRESS) && defined(CONFIG_PCI)

include/linux/sh_timer.h

@@ -2,11 +2,6 @@
 #define __SH_TIMER_H__
 
 struct sh_timer_config {
-	char *name;
-	long channel_offset;
-	int timer_bit;
-	unsigned long clockevent_rating;
-	unsigned long clocksource_rating;
 	unsigned int channels_mask;
 };
 

lib/devres.c

@@ -86,8 +86,6 @@ void devm_iounmap(struct device *dev, void __iomem *addr)
 }
 EXPORT_SYMBOL(devm_iounmap);
 
-#define IOMEM_ERR_PTR(err) (__force void __iomem *)ERR_PTR(err)
-
 /**
  * devm_ioremap_resource() - check, request region, and ioremap resource
  * @dev: generic device to handle the resource for