Commit 1b0e48ad authored by Dmitri Belimov's avatar Dmitri Belimov Committed by Mauro Carvalho Chehab

V4L/DVB: Rework for support xc5000

Set correct GPIO number for BEHOLD_WANDER/VOYAGER
Add xc5000 callback function
Small rework tm6000_cards_setup function
Small rework tm6000_config_tuner, build mode_mask by config information
Rework for support xc5000 silicon tuner
Add some information messages for more better understand an errors.

[mchehab@redhat.com: Fix CodingStyle and merge conflicts]
Signed-off-by: default avatarBeholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 9b558434
......@@ -231,7 +231,9 @@ struct tm6000_board tm6000_boards[] = {
.has_remote = 1,
},
.gpio = {
.tuner_reset = TM6000_GPIO_2,
.tuner_reset = TM6010_GPIO_0,
.demod_reset = TM6010_GPIO_1,
.power_led = TM6010_GPIO_6,
},
},
[TM6010_BOARD_BEHOLD_VOYAGER] = {
......@@ -247,7 +249,8 @@ struct tm6000_board tm6000_boards[] = {
.has_remote = 1,
},
.gpio = {
.tuner_reset = TM6000_GPIO_2,
.tuner_reset = TM6010_GPIO_0,
.power_led = TM6010_GPIO_6,
},
},
[TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE] = {
......@@ -320,6 +323,31 @@ struct usb_device_id tm6000_id_table[] = {
{ },
};
/* Tuner callback to provide the proper gpio changes needed for xc5000 */
int tm6000_xc5000_callback(void *ptr, int component, int command, int arg)
{
int rc = 0;
struct tm6000_core *dev = ptr;
if (dev->tuner_type != TUNER_XC5000)
return 0;
switch (command) {
case XC5000_TUNER_RESET:
tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
dev->gpio.tuner_reset, 0x01);
msleep(15);
tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
dev->gpio.tuner_reset, 0x00);
msleep(15);
tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
dev->gpio.tuner_reset, 0x01);
break;
}
return (rc);
}
/* Tuner callback to provide the proper gpio changes needed for xc2028 */
int tm6000_tuner_callback(void *ptr, int component, int command, int arg)
......@@ -454,6 +482,21 @@ int tm6000_cards_setup(struct tm6000_core *dev)
tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00);
msleep(15);
break;
case TM6010_BOARD_BEHOLD_WANDER:
/* Power led on (blue) */
tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01);
msleep(15);
/* Reset zarlink zl10353 */
tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00);
msleep(50);
tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01);
msleep(15);
break;
case TM6010_BOARD_BEHOLD_VOYAGER:
/* Power led on (blue) */
tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01);
msleep(15);
break;
default:
break;
}
......@@ -465,41 +508,34 @@ int tm6000_cards_setup(struct tm6000_core *dev)
* If a device uses a different sequence or different GPIO pins for
* reset, just add the code at the board-specific part
*/
for (i = 0; i < 2; i++) {
rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
dev->gpio.tuner_reset, 0x00);
if (rc < 0) {
printk(KERN_ERR "Error %i doing GPIO1 reset\n", rc);
return rc;
}
msleep(10); /* Just to be conservative */
rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
dev->gpio.tuner_reset, 0x01);
if (rc < 0) {
printk(KERN_ERR "Error %i doing GPIO1 reset\n", rc);
return rc;
}
msleep(10);
rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_4, 0);
if (rc < 0) {
printk(KERN_ERR "Error %i doing GPIO4 reset\n", rc);
return rc;
}
if (dev->gpio.tuner_reset) {
for (i = 0; i < 2; i++) {
rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
dev->gpio.tuner_reset, 0x00);
if (rc < 0) {
printk(KERN_ERR "Error %i doing tuner reset\n", rc);
return rc;
}
msleep(10);
rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_4, 1);
if (rc < 0) {
printk(KERN_ERR "Error %i doing GPIO4 reset\n", rc);
return rc;
}
msleep(10); /* Just to be conservative */
rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
dev->gpio.tuner_reset, 0x01);
if (rc < 0) {
printk(KERN_ERR "Error %i doing tuner reset\n", rc);
return rc;
}
msleep(10);
if (!i) {
rc = tm6000_get_reg32(dev, REQ_40_GET_VERSION, 0, 0);
if (rc >= 0)
printk(KERN_DEBUG "board=0x%08x\n", rc);
if (!i) {
rc = tm6000_get_reg32(dev, REQ_40_GET_VERSION, 0, 0);
if (rc >= 0)
printk(KERN_DEBUG "board=0x%08x\n", rc);
}
}
} else {
printk(KERN_ERR "Tuner reset is not configured\n");
return -1;
}
msleep(50);
......@@ -518,12 +554,26 @@ static void tm6000_config_tuner(struct tm6000_core *dev)
memset(&tun_setup, 0, sizeof(tun_setup));
tun_setup.type = dev->tuner_type;
tun_setup.addr = dev->tuner_addr;
tun_setup.mode_mask = T_ANALOG_TV | T_RADIO | T_DIGITAL_TV;
tun_setup.tuner_callback = tm6000_tuner_callback;
tun_setup.mode_mask = 0;
if (dev->caps.has_tuner)
tun_setup.mode_mask |= (T_ANALOG_TV | T_RADIO);
if (dev->caps.has_dvb)
tun_setup.mode_mask |= T_DIGITAL_TV;
switch (dev->tuner_type) {
case TUNER_XC2028:
tun_setup.tuner_callback = tm6000_tuner_callback;;
break;
case TUNER_XC5000:
tun_setup.tuner_callback = tm6000_xc5000_callback;
break;
}
v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
if (dev->tuner_type == TUNER_XC2028) {
switch (dev->tuner_type) {
case TUNER_XC2028: {
struct v4l2_priv_tun_config xc2028_cfg;
struct xc2028_ctrl ctl;
......@@ -553,9 +603,31 @@ static void tm6000_config_tuner(struct tm6000_core *dev)
}
printk(KERN_INFO "Setting firmware parameters for xc2028\n");
v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config,
&xc2028_cfg);
}
break;
case TUNER_XC5000:
{
struct v4l2_priv_tun_config xc5000_cfg;
struct xc5000_config ctl = {
.i2c_address = dev->tuner_addr,
.if_khz = 4570,
.radio_input = XC5000_RADIO_FM1,
};
xc5000_cfg.tuner = TUNER_XC5000;
xc5000_cfg.priv = &ctl;
v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config,
&xc5000_cfg);
}
break;
default:
printk(KERN_INFO "Unknown tuner type. Tuner is not configured.\n");
break;
}
}
......
......@@ -222,6 +222,7 @@ struct tm6000_fh {
/* In tm6000-cards.c */
int tm6000_tuner_callback (void *ptr, int component, int command, int arg);
int tm6000_xc5000_callback (void *ptr, int component, int command, int arg);
int tm6000_cards_setup(struct tm6000_core *dev);
/* In tm6000-core.c */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment