x86: Remove BIOS data range from e820

In preparation for moving to the generic page_is_ram(), make explicit
what we expect to be reserved and not reserved.
Tested-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20100122033004.335813103@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

arch/x86/kernel/e820.c

@@ -517,11 +517,19 @@ u64 __init e820_remove_range(u64 start, u64 size, unsigned old_type,
 			     int checktype)
 {
 	int i;
+	u64 end;
 	u64 real_removed_size = 0;
 
 	if (size > (ULLONG_MAX - start))
 		size = ULLONG_MAX - start;
 
+	end = start + size;
+	printk(KERN_DEBUG "e820 remove range: %016Lx - %016Lx ",
+		       (unsigned long long) start,
+		       (unsigned long long) end);
+	e820_print_type(old_type);
+	printk(KERN_CONT "\n");
+
 	for (i = 0; i < e820.nr_map; i++) {
 		struct e820entry *ei = &e820.map[i];
 		u64 final_start, final_end;

arch/x86/kernel/setup.c

@@ -650,6 +650,23 @@ static struct dmi_system_id __initdata bad_bios_dmi_table[] = {
 	{}
 };
 
+static void __init trim_bios_range(void)
+{
+	/*
+	 * A special case is the first 4Kb of memory;
+	 * This is a BIOS owned area, not kernel ram, but generally
+	 * not listed as such in the E820 table.
+	 */
+	e820_update_range(0, PAGE_SIZE, E820_RAM, E820_RESERVED);
+	/*
+	 * special case: Some BIOSen report the PC BIOS
+	 * area (640->1Mb) as ram even though it is not.
+	 * take them out.
+	 */
+	e820_remove_range(BIOS_BEGIN, BIOS_END - BIOS_BEGIN, E820_RAM, 1);
+	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
+}
+
 /*
  * Determine if we were loaded by an EFI loader.  If so, then we have also been
  * passed the efi memmap, systab, etc., so we should use these data structures
@@ -813,7 +830,7 @@ void __init setup_arch(char **cmdline_p)
 	insert_resource(&iomem_resource, &data_resource);
 	insert_resource(&iomem_resource, &bss_resource);
 
-
+	trim_bios_range();
 #ifdef CONFIG_X86_32
 	if (ppro_with_ram_bug()) {
 		e820_update_range(0x70000000ULL, 0x40000ULL, E820_RAM,

arch/x86/mm/ioremap.c

@@ -29,22 +29,6 @@ int page_is_ram(unsigned long pagenr)
 	resource_size_t addr, end;
 	int i;
 
-	/*
-	 * A special case is the first 4Kb of memory;
-	 * This is a BIOS owned area, not kernel ram, but generally
-	 * not listed as such in the E820 table.
-	 */
-	if (pagenr == 0)
-		return 0;
-
-	/*
-	 * Second special case: Some BIOSen report the PC BIOS
-	 * area (640->1Mb) as ram even though it is not.
-	 */
-	if (pagenr >= (BIOS_BEGIN >> PAGE_SHIFT) &&
-		    pagenr < (BIOS_END >> PAGE_SHIFT))
-		return 0;
-
 	for (i = 0; i < e820.nr_map; i++) {
 		/*
 		 * Not usable memory: