arm64: dts: rockchip: Add devicetree for Pine64 PineTab2

This includes support for both the v0.1 units that were sent to developers and
the v2.0 units from production.

v1.0 is not included as no units are known to exist.

Working/Tested:
- SDMMC
- UART
- Buttons
- Charging/Battery/PMIC
- Audio
- USB
- Display
- SPI NOR Flash
Signed-off-by: Alexander Warnecke <awarnecke002@hotmail.com>
Signed-off-by: Manuel Traut <manut@mecka.net>
Tested-By: Diederik de Haas <didi.debian@cknow.org>
Reviewed-by: Ondrej Jirman <megi@xff.cz>
Tested-by: Ondrej Jirman <megi@xff.cz>
Link: https://lore.kernel.org/r/20240127-pinetab2-v4-4-37aab1c39194@mecka.netSigned-off-by: Heiko Stuebner <heiko@sntech.de>

arch/arm64/boot/dts/rockchip/Makefile

@@ -80,6 +80,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353vs.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg503.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinetab2-v0.1.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinetab2-v2.0.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rgb30.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rk2023.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-x55.dtb

arch/arm64/boot/dts/rockchip/rk3566-pinetab2-v0.1.dts

+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3566-pinetab2.dtsi"
+
+/ {
+	model = "Pine64 PineTab2 v0.1";
+	compatible = "pine64,pinetab2-v0.1", "pine64,pinetab2", "rockchip,rk3566";
+};
+
+&lcd {
+	reset-gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_pwren_h &lcd0_rst_l>;
+};
+
+&pinctrl {
+	lcd0 {
+		lcd0_rst_l: lcd0-rst-l {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdmmc1 {
+	vmmc-supply = <&vcc3v3_sys>;
+};

arch/arm64/boot/dts/rockchip/rk3566-pinetab2-v2.0.dts

+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3566-pinetab2.dtsi"
+
+/ {
+	model = "Pine64 PineTab2 v2.0";
+	compatible = "pine64,pinetab2-v2.0", "pine64,pinetab2", "rockchip,rk3566";
+};
+
+&gpio_keys {
+	pinctrl-0 = <&kb_id_det>, <&hall_int_l>;
+
+	event-hall-sensor {
+		debounce-interval = <20>;
+		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+		label = "Hall Sensor";
+		linux,code = <SW_LID>;
+		linux,input-type = <EV_SW>;
+		wakeup-event-action = <EV_ACT_DEASSERTED>;
+		wakeup-source;
+	};
+};
+
+&lcd {
+	reset-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_pwren_h &lcd0_rst_l>;
+};
+
+&pinctrl {
+	lcd0 {
+		lcd0_rst_l: lcd0-rst-l {
+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hall {
+		hall_int_l: hall-int-l {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdmmc1 {
+	vmmc-supply = <&vcc_sys>;
+};