Commit 1bacb048 authored by Franky Lin's avatar Franky Lin Committed by John W. Linville

brcmfmac: replace cfg80211 testmode with vendor command

Passing a pointer from user space and using it directly in driver is not a
preferable behavior. Switch to cfg80211 vendor mode for dongle command for
better cross platform compatibility.
Reviewed-by: default avatarDaniel (Deognyoun) Kim <dekim@broadcom.com>
Reviewed-by: default avatarArend Van Spriel <arend@broadcom.com>
Reviewed-by: default avatarPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: default avatarHante Meuleman <meuleman@broadcom.com>
Signed-off-by: default avatarFranky Lin <frankyl@broadcom.com>
Signed-off-by: default avatarArend van Spriel <arend@broadcom.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 51c7f5ed
......@@ -34,7 +34,8 @@ brcmfmac-objs += \
dhd_common.o \
dhd_linux.o \
firmware.o \
btcoex.o
btcoex.o \
vendor.o
brcmfmac-$(CONFIG_BRCMFMAC_SDIO) += \
dhd_sdio.o \
bcmsdh.o
......
......@@ -49,16 +49,6 @@
*/
#define BRCMF_DRIVER_FIRMWARE_VERSION_LEN 32
/* Bus independent dongle command */
struct brcmf_dcmd {
uint cmd; /* common dongle cmd definition */
void *buf; /* pointer to user buffer */
uint len; /* length of user buffer */
u8 set; /* get or set request (optional) */
uint used; /* bytes read or written (optional) */
uint needed; /* bytes needed (optional) */
};
/**
* struct brcmf_ampdu_rx_reorder - AMPDU receive reorder info
*
......
/*
* Copyright (c) 2014 Broadcom Corporation
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
* SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
* OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <linux/vmalloc.h>
#include <net/cfg80211.h>
#include <net/netlink.h>
#include <brcmu_wifi.h>
#include "fwil_types.h"
#include "dhd.h"
#include "p2p.h"
#include "dhd_dbg.h"
#include "wl_cfg80211.h"
#include "vendor.h"
#include "fwil.h"
static int brcmf_cfg80211_vndr_cmds_dcmd_handler(struct wiphy *wiphy,
struct wireless_dev *wdev,
const void *data, int len)
{
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
struct net_device *ndev = cfg_to_ndev(cfg);
const struct brcmf_vndr_dcmd_hdr *cmdhdr = data;
struct sk_buff *reply;
int ret, payload, ret_len;
void *dcmd_buf = NULL, *wr_pointer;
u16 msglen, maxmsglen = PAGE_SIZE - 0x100;
brcmf_dbg(TRACE, "cmd %x set %d len %d\n", cmdhdr->cmd, cmdhdr->set,
cmdhdr->len);
len -= sizeof(struct brcmf_vndr_dcmd_hdr);
ret_len = cmdhdr->len;
if (ret_len > 0 || len > 0) {
if (len > BRCMF_DCMD_MAXLEN) {
brcmf_err("oversize input buffer %d\n", len);
len = BRCMF_DCMD_MAXLEN;
}
if (ret_len > BRCMF_DCMD_MAXLEN) {
brcmf_err("oversize return buffer %d\n", ret_len);
ret_len = BRCMF_DCMD_MAXLEN;
}
payload = max(ret_len, len) + 1;
dcmd_buf = vzalloc(payload);
if (NULL == dcmd_buf)
return -ENOMEM;
memcpy(dcmd_buf, (void *)cmdhdr + cmdhdr->offset, len);
*(char *)(dcmd_buf + len) = '\0';
}
if (cmdhdr->set)
ret = brcmf_fil_cmd_data_set(netdev_priv(ndev), cmdhdr->cmd,
dcmd_buf, ret_len);
else
ret = brcmf_fil_cmd_data_get(netdev_priv(ndev), cmdhdr->cmd,
dcmd_buf, ret_len);
if (ret != 0)
goto exit;
wr_pointer = dcmd_buf;
while (ret_len > 0) {
msglen = ret_len > maxmsglen ? maxmsglen : ret_len;
ret_len -= msglen;
payload = msglen + sizeof(msglen);
reply = cfg80211_vendor_cmd_alloc_reply_skb(wiphy, payload);
if (NULL == reply) {
ret = -ENOMEM;
break;
}
if (nla_put(reply, BRCMF_NLATTR_DATA, msglen, wr_pointer) ||
nla_put_u16(reply, BRCMF_NLATTR_LEN, msglen)) {
kfree_skb(reply);
ret = -ENOBUFS;
break;
}
ret = cfg80211_vendor_cmd_reply(reply);
if (ret)
break;
wr_pointer += msglen;
}
exit:
vfree(dcmd_buf);
return ret;
}
const struct wiphy_vendor_command brcmf_vendor_cmds[] = {
{
{
.vendor_id = BROADCOM_OUI,
.subcmd = BRCMF_VNDR_CMDS_DCMD
},
.flags = WIPHY_VENDOR_CMD_NEED_WDEV |
WIPHY_VENDOR_CMD_NEED_NETDEV,
.doit = brcmf_cfg80211_vndr_cmds_dcmd_handler
},
};
/*
* Copyright (c) 2014 Broadcom Corporation
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
* SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
* OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef _vendor_h_
#define _vendor_h_
#define BROADCOM_OUI 0x001018
enum brcmf_vndr_cmds {
BRCMF_VNDR_CMDS_UNSPEC,
BRCMF_VNDR_CMDS_DCMD,
BRCMF_VNDR_CMDS_LAST
};
/**
* enum brcmf_nlattrs - nl80211 message attributes
*
* @BRCMF_NLATTR_LEN: message body length
* @BRCMF_NLATTR_DATA: message body
*/
enum brcmf_nlattrs {
BRCMF_NLATTR_UNSPEC,
BRCMF_NLATTR_LEN,
BRCMF_NLATTR_DATA,
__BRCMF_NLATTR_AFTER_LAST,
BRCMF_NLATTR_MAX = __BRCMF_NLATTR_AFTER_LAST - 1
};
/**
* struct brcmf_vndr_dcmd_hdr - message header for cfg80211 vendor command dcmd
* support
*
* @cmd: common dongle cmd definition
* @len: length of expecting return buffer
* @offset: offset of data buffer
* @set: get or set request(optional)
* @magic: magic number for verification
*/
struct brcmf_vndr_dcmd_hdr {
uint cmd;
int len;
uint offset;
uint set;
uint magic;
};
extern const struct wiphy_vendor_command brcmf_vendor_cmds[];
#endif /* _vendor_h_ */
......@@ -19,6 +19,7 @@
#include <linux/kernel.h>
#include <linux/etherdevice.h>
#include <linux/module.h>
#include <linux/vmalloc.h>
#include <net/cfg80211.h>
#include <net/netlink.h>
......@@ -33,6 +34,7 @@
#include "btcoex.h"
#include "wl_cfg80211.h"
#include "fwil.h"
#include "vendor.h"
#define BRCMF_SCAN_IE_LEN_MAX 2048
#define BRCMF_PNO_VERSION 2
......@@ -3257,35 +3259,6 @@ static int brcmf_cfg80211_sched_scan_stop(struct wiphy *wiphy,
return 0;
}
#ifdef CONFIG_NL80211_TESTMODE
static int brcmf_cfg80211_testmode(struct wiphy *wiphy,
struct wireless_dev *wdev,
void *data, int len)
{
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
struct net_device *ndev = cfg_to_ndev(cfg);
struct brcmf_dcmd *dcmd = data;
struct sk_buff *reply;
int ret;
brcmf_dbg(TRACE, "cmd %x set %d buf %p len %d\n", dcmd->cmd, dcmd->set,
dcmd->buf, dcmd->len);
if (dcmd->set)
ret = brcmf_fil_cmd_data_set(netdev_priv(ndev), dcmd->cmd,
dcmd->buf, dcmd->len);
else
ret = brcmf_fil_cmd_data_get(netdev_priv(ndev), dcmd->cmd,
dcmd->buf, dcmd->len);
if (ret == 0) {
reply = cfg80211_testmode_alloc_reply_skb(wiphy, sizeof(*dcmd));
nla_put(reply, NL80211_ATTR_TESTDATA, sizeof(*dcmd), dcmd);
ret = cfg80211_testmode_reply(reply);
}
return ret;
}
#endif
static s32 brcmf_configure_opensecurity(struct brcmf_if *ifp)
{
s32 err;
......@@ -4303,7 +4276,6 @@ static struct cfg80211_ops wl_cfg80211_ops = {
.crit_proto_start = brcmf_cfg80211_crit_proto_start,
.crit_proto_stop = brcmf_cfg80211_crit_proto_stop,
.tdls_oper = brcmf_cfg80211_tdls_oper,
CFG80211_TESTMODE_CMD(brcmf_cfg80211_testmode)
};
static void brcmf_wiphy_pno_params(struct wiphy *wiphy)
......@@ -4408,6 +4380,11 @@ static struct wiphy *brcmf_setup_wiphy(struct device *phydev)
brcmf_dbg(INFO, "Registering custom regulatory\n");
wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG;
wiphy_apply_custom_regulatory(wiphy, &brcmf_regdom);
/* vendor commands/events support */
wiphy->vendor_commands = brcmf_vendor_cmds;
wiphy->n_vendor_commands = BRCMF_VNDR_CMDS_LAST - 1;
err = wiphy_register(wiphy);
if (err < 0) {
brcmf_err("Could not register wiphy device (%d)\n", err);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment