Commit 1bc2f5fa authored by H. Nikolaus Schaller's avatar H. Nikolaus Schaller Committed by Tony Lindgren

ARM: dts: omap5: board-common: fix wrong SMPS6 (VDD-DDR3) voltage

DDR3L is usually specified as

	JEDEC standard 1.35V(1.28V~1.45V) & 1.5V(1.425V~1.575V)

Therefore setting smps6 regulator to 1.2V is definitively below
minimum. It appears that real world chips are more forgiving than
data sheets indicate, but let's set the regulator right.

Note: a board that uses other voltages (DDR with 1.5V) can
overwrite by referencing &smps6_reg.
Signed-off-by: default avatarH. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 80513a2b
...@@ -476,8 +476,8 @@ smps45_reg: smps45 { ...@@ -476,8 +476,8 @@ smps45_reg: smps45 {
smps6_reg: smps6 { smps6_reg: smps6 {
/* VDD_DDR3 - over VDD_SMPS6 */ /* VDD_DDR3 - over VDD_SMPS6 */
regulator-name = "smps6"; regulator-name = "smps6";
regulator-min-microvolt = <1200000>; regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1200000>; regulator-max-microvolt = <1350000>;
regulator-always-on; regulator-always-on;
regulator-boot-on; regulator-boot-on;
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment