Commit 1bc5e139 authored by Keerthy's avatar Keerthy Committed by Tony Lindgren

ARM: dts: AM437X-GP-EVM: AM437X-SK-EVM: Make dcdc3 dcdc5 and dcdc6 enable during suspend

dcdc3, dcdc5, dcdc6 supply ddr and rtc respectively. These
are required to be on during suspend. Hence set the state accordingly.
Signed-off-by: default avatarKeerthy <j-keerthy@ti.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 08ef9806
......@@ -537,7 +537,11 @@ dcdc3: regulator-dcdc3 {
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
dcdc5: regulator-dcdc5 {
compatible = "ti,tps65218-dcdc5";
regulator-name = "v1_0bat";
......@@ -545,6 +549,9 @@ dcdc5: regulator-dcdc5 {
regulator-max-microvolt = <1000000>;
regulator-boot-on;
regulator-always-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
dcdc6: regulator-dcdc6 {
......@@ -554,6 +561,9 @@ dcdc6: regulator-dcdc6 {
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
ldo1: regulator-ldo1 {
......
......@@ -454,6 +454,9 @@ dcdc3: regulator-dcdc3 {
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
dcdc4: regulator-dcdc4 {
......@@ -465,6 +468,30 @@ dcdc4: regulator-dcdc4 {
regulator-always-on;
};
dcdc5: regulator-dcdc5 {
compatible = "ti,tps65218-dcdc5";
regulator-name = "v1_0bat";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-boot-on;
regulator-always-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
dcdc6: regulator-dcdc6 {
compatible = "ti,tps65218-dcdc6";
regulator-name = "v1_8bat";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
ldo1: regulator-ldo1 {
compatible = "ti,tps65218-ldo1";
regulator-name = "v1_8d";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment