arm64: dts: ti: Add support for J721E SK

J721E Starter Kit (SK)[1] is a low cost, small form factor board designed
for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high
performance vision accelerators, video codec accelerators, latest C71x
and C66x DSP, high bandwidth real-time IPs for capture and display, GPU,
dedicated safety island and security accelerators. The SoC is power
optimized to provide best in class performance for industrial and
automotive applications.

    J721E SK supports the following interfaces:
    * 4 GB LPDDR4 RAM
    * x1 Gigabit Ethernet interface
    * x1 USB 3.0 Type-C port
    * x3 USB 3.0 Type-A ports
    * x1 PCIe M.2 E Key
    * x1 PCIe M.2 M Key
    * 512 Mbit OSPI flash
    * x2 CSI2 Camera interface (RPi and TI Camera connector)
    * 40-pin Raspberry Pi GPIO header

Add basic support for J721E-SK.

[1] https://www.ti.com/tool/SK-TDA4VMSigned-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210929081333.26454-3-sinthu.raja@ti.com

arch/arm64/boot/dts/ti/Makefile

@@ -13,6 +13,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb
 
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-common-proc-board.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb
 
 dtb-$(CONFIG_ARCH_K3) += k3-j7200-common-proc-board.dtb