Merge kroah.com:/home/greg/linux/BK/bleed-2.5

into kroah.com:/home/greg/linux/BK/gregkh-2.6

drivers/usb/host/uhci-hcd.c

@@ -2185,8 +2185,8 @@ static int uhci_reset(struct usb_hcd *hcd)
 	/* Maybe kick BIOS off this hardware.  Then reset, so we won't get
 	 * interrupts from any previous setup.
 	 */
-	pci_write_config_word(hcd->pdev, USBLEGSUP, USBLEGSUP_DEFAULT);
 	reset_hc(uhci);
+	pci_write_config_word(hcd->pdev, USBLEGSUP, USBLEGSUP_DEFAULT);
 	return 0;
 }
 

drivers/usb/misc/speedtch.c

@@ -189,8 +189,7 @@ struct udsl_vcc_data {
 	struct atm_vcc *vcc;
 
 	/* raw cell reassembly */
-	struct sk_buff *skb;
-	unsigned int max_pdu;
+	struct sk_buff *sarb;
 };
 
 /* send */
@@ -314,12 +313,10 @@ static void udsl_extract_cells (struct udsl_instance_data *instance, unsigned ch
 {
 	struct udsl_vcc_data *cached_vcc = NULL;
 	struct atm_vcc *vcc;
-	struct sk_buff *skb;
+	struct sk_buff *sarb;
 	struct udsl_vcc_data *vcc_data;
 	int cached_vci = 0;
 	unsigned int i;
-	unsigned int length;
-	unsigned int pdu_length;
 	int pti;
 	int vci;
 	short cached_vpi = 0;
@@ -344,74 +341,73 @@ static void udsl_extract_cells (struct udsl_instance_data *instance, unsigned ch
 		}
 
 		vcc = vcc_data->vcc;
+		sarb = vcc_data->sarb;
 
-		if (!vcc_data->skb && !(vcc_data->skb = dev_alloc_skb (vcc_data->max_pdu))) {
-			dbg ("udsl_extract_cells: no memory for skb (vcc: 0x%p)!", vcc);
-			if (pti)
-				atomic_inc (&vcc->stats->rx_err);
-			continue;
-		}
-
-		skb = vcc_data->skb;
-
-		if (skb->len + ATM_CELL_PAYLOAD > vcc_data->max_pdu) {
-			dbg ("udsl_extract_cells: buffer overrun (max_pdu: %u, skb->len %u, vcc: 0x%p)", vcc_data->max_pdu, skb->len, vcc);
+		if (sarb->tail + ATM_CELL_PAYLOAD > sarb->end) {
+			dbg ("udsl_extract_cells: buffer overrun (sarb->len %u, vcc: 0x%p)!", sarb->len, vcc);
 			/* discard cells already received */
-			skb_trim (skb, 0);
-			DEBUG_ON (vcc_data->max_pdu < ATM_CELL_PAYLOAD);
+			skb_trim (sarb, 0);
 		}
 
-		memcpy (skb->tail, source + ATM_CELL_HEADER, ATM_CELL_PAYLOAD);
-		__skb_put (skb, ATM_CELL_PAYLOAD);
+		memcpy (sarb->tail, source + ATM_CELL_HEADER, ATM_CELL_PAYLOAD);
+		__skb_put (sarb, ATM_CELL_PAYLOAD);
 
 		if (pti) {
+			struct sk_buff *skb;
+			unsigned int length;
+			unsigned int pdu_length;
+
 			length = (source [ATM_CELL_SIZE - 6] << 8) + source [ATM_CELL_SIZE - 5];
 
 			/* guard against overflow */
 			if (length > ATM_MAX_AAL5_PDU) {
-				dbg ("udsl_extract_cells: bogus length %u (vcc: 0x%p)", length, vcc);
-				goto drop;
+				dbg ("udsl_extract_cells: bogus length %u (vcc: 0x%p)!", length, vcc);
+				atomic_inc (&vcc->stats->rx_err);
+				goto out;
 			}
 
 			pdu_length = UDSL_NUM_CELLS (length) * ATM_CELL_PAYLOAD;
 
-			if (skb->len < pdu_length) {
-				dbg ("udsl_extract_cells: bogus pdu_length %u (skb->len: %u, vcc: 0x%p)", pdu_length, skb->len, vcc);
-				goto drop;
+			if (sarb->len < pdu_length) {
+				dbg ("udsl_extract_cells: bogus pdu_length %u (sarb->len: %u, vcc: 0x%p)!", pdu_length, sarb->len, vcc);
+				atomic_inc (&vcc->stats->rx_err);
+				goto out;
 			}
 
-			if (crc32_be (~0, skb->tail - pdu_length, pdu_length) != 0xc704dd7b) {
-				dbg ("udsl_extract_cells: packet failed crc check (vcc: 0x%p)", vcc);
-				goto drop;
+			if (crc32_be (~0, sarb->tail - pdu_length, pdu_length) != 0xc704dd7b) {
+				dbg ("udsl_extract_cells: packet failed crc check (vcc: 0x%p)!", vcc);
+				atomic_inc (&vcc->stats->rx_err);
+				goto out;
 			}
 
-			if (!atm_charge (vcc, skb->truesize)) {
-				dbg ("udsl_extract_cells: failed atm_charge (skb->truesize: %u)", skb->truesize);
-				goto drop_no_stats; /* atm_charge increments rx_drop */
-			}
+			vdbg ("udsl_extract_cells: got packet (length: %u, pdu_length: %u, vcc: 0x%p)", length, pdu_length, vcc);
 
-			/* now that we are sure to send the skb, it is ok to change skb->data */
-			if (skb->len > pdu_length)
-				skb_pull (skb, skb->len - pdu_length); /* discard initial junk */
+			if (!(skb = dev_alloc_skb (length))) {
+				dbg ("udsl_extract_cells: no memory for skb (length: %u)!", length);
+				atomic_inc (&vcc->stats->rx_drop);
+				goto out;
+			}
 
-			skb_trim (skb, length); /* drop zero padding and trailer */
+			vdbg ("udsl_extract_cells: allocated new sk_buff (skb: 0x%p, skb->truesize: %u)", skb, skb->truesize);
 
-			atomic_inc (&vcc->stats->rx);
+			if (!atm_charge (vcc, skb->truesize)) {
+				dbg ("udsl_extract_cells: failed atm_charge (skb->truesize: %u)!", skb->truesize);
+				dev_kfree_skb (skb);
+				goto out; /* atm_charge increments rx_drop */
+			}
 
-			PACKETDEBUG (skb->data, skb->len);
+			memcpy (skb->data, sarb->tail - pdu_length, length);
+			__skb_put (skb, length);
 
 			vdbg ("udsl_extract_cells: sending skb 0x%p, skb->len %u, skb->truesize %u", skb, skb->len, skb->truesize);
 
-			vcc->push (vcc, skb);
-
-			vcc_data->skb = NULL;
+			PACKETDEBUG (skb->data, skb->len);
 
-			continue;
+			vcc->push (vcc, skb);
 
-drop:
-			atomic_inc (&vcc->stats->rx_err);
-drop_no_stats:
-			skb_trim (skb, 0);
+			atomic_inc (&vcc->stats->rx);
+out:
+			skb_trim (sarb, 0);
 		}
 	}
 }
@@ -871,6 +867,7 @@ static int udsl_atm_open (struct atm_vcc *vcc, short vpi, int vci)
 {
 	struct udsl_instance_data *instance = vcc->dev->dev_data;
 	struct udsl_vcc_data *new;
+	unsigned int max_pdu;
 
 	dbg ("udsl_atm_open: vpi %hd, vci %d", vpi, vci);
 
@@ -883,8 +880,10 @@ static int udsl_atm_open (struct atm_vcc *vcc, short vpi, int vci)
 		return -EINVAL;
 
 	/* only support AAL5 */
-	if ((vcc->qos.aal != ATM_AAL5) || (vcc->qos.rxtp.max_sdu < 0) || (vcc->qos.rxtp.max_sdu > ATM_MAX_AAL5_PDU))
+	if ((vcc->qos.aal != ATM_AAL5) || (vcc->qos.rxtp.max_sdu < 0) || (vcc->qos.rxtp.max_sdu > ATM_MAX_AAL5_PDU)) {
+		dbg ("udsl_atm_open: unsupported ATM type %d!", vcc->qos.aal);
 		return -EINVAL;
+	}
 
 	if (!instance->firmware_loaded) {
 		dbg ("udsl_atm_open: firmware not loaded!");
@@ -894,11 +893,13 @@ static int udsl_atm_open (struct atm_vcc *vcc, short vpi, int vci)
 	down (&instance->serialize); /* vs self, udsl_atm_close */
 
 	if (udsl_find_vcc (instance, vpi, vci)) {
+		dbg ("udsl_atm_open: %hd/%d already in use!", vpi, vci);
 		up (&instance->serialize);
 		return -EADDRINUSE;
 	}
 
 	if (!(new = kmalloc (sizeof (struct udsl_vcc_data), GFP_KERNEL))) {
+		dbg ("udsl_atm_open: no memory for vcc_data!");
 		up (&instance->serialize);
 		return -ENOMEM;
 	}
@@ -907,7 +908,15 @@ static int udsl_atm_open (struct atm_vcc *vcc, short vpi, int vci)
 	new->vcc = vcc;
 	new->vpi = vpi;
 	new->vci = vci;
-	new->max_pdu = max (1, UDSL_NUM_CELLS (vcc->qos.rxtp.max_sdu)) * ATM_CELL_PAYLOAD;
+
+	/* udsl_extract_cells requires at least one cell */
+	max_pdu = max (1, UDSL_NUM_CELLS (vcc->qos.rxtp.max_sdu)) * ATM_CELL_PAYLOAD;
+	if (!(new->sarb = alloc_skb (max_pdu, GFP_KERNEL))) {
+		dbg ("udsl_atm_open: no memory for SAR buffer!");
+	        kfree (new);
+		up (&instance->serialize);
+		return -ENOMEM;
+	}
 
 	vcc->dev_data = new;
 	vcc->vpi = vpi;
@@ -925,7 +934,7 @@ static int udsl_atm_open (struct atm_vcc *vcc, short vpi, int vci)
 
 	tasklet_schedule (&instance->receive_tasklet);
 
-	dbg ("udsl_atm_open: allocated vcc data 0x%p (max_pdu: %u)", new, new->max_pdu);
+	dbg ("udsl_atm_open: allocated vcc data 0x%p (max_pdu: %u)", new, max_pdu);
 
 	return 0;
 }
@@ -952,9 +961,8 @@ static void udsl_atm_close (struct atm_vcc *vcc)
 	list_del (&vcc_data->list);
 	tasklet_enable (&instance->receive_tasklet);
 
-	if (vcc_data->skb)
-		dev_kfree_skb (vcc_data->skb);
-	vcc_data->skb = NULL;
+	kfree_skb (vcc_data->sarb);
+	vcc_data->sarb = NULL;
 
 	kfree (vcc_data);
 	vcc->dev_data = NULL;
@@ -1216,7 +1224,7 @@ static void udsl_usb_disconnect (struct usb_interface *intf)
 
 	for (i = 0; i < num_rcv_urbs; i++)
 		if ((result = usb_unlink_urb (instance->receivers [i].urb)) < 0)
-			dbg ("udsl_usb_disconnect: usb_unlink_urb on receive urb %d returned %d", i, result);
+			dbg ("udsl_usb_disconnect: usb_unlink_urb on receive urb %d returned %d!", i, result);
 
 	/* wait for completion handlers to finish */
 	do {
@@ -1252,7 +1260,7 @@ static void udsl_usb_disconnect (struct usb_interface *intf)
 
 	for (i = 0; i < num_snd_urbs; i++)
 		if ((result = usb_unlink_urb (instance->senders [i].urb)) < 0)
-			dbg ("udsl_usb_disconnect: usb_unlink_urb on send urb %d returned %d", i, result);
+			dbg ("udsl_usb_disconnect: usb_unlink_urb on send urb %d returned %d!", i, result);
 
 	/* wait for completion handlers to finish */
 	do {
@@ -1298,11 +1306,9 @@ static void udsl_usb_disconnect (struct usb_interface *intf)
 
 static int __init udsl_usb_init (void)
 {
-	struct sk_buff *skb; /* dummy for sizeof */
-
 	dbg ("udsl_usb_init: driver version " DRIVER_VERSION);
 
-	if (sizeof (struct udsl_control) > sizeof (skb->cb)) {
+	if (sizeof (struct udsl_control) > sizeof (((struct sk_buff *)0)->cb)) {
 		printk (KERN_ERR __FILE__ ": unusable with this kernel!\n");
 		return -EIO;
 	}

drivers/usb/storage/freecom.c

@@ -101,7 +101,8 @@ struct freecom_status {
 #define FCM_PACKET_IDE_READ	0xC0
 
 /* All packets (except for status) are 64 bytes long. */
-#define FCM_PACKET_LENGTH	64
+#define FCM_PACKET_LENGTH		64
+#define FCM_STATUS_PACKET_LENGTH	4
 
 static int
 freecom_readdata (Scsi_Cmnd *srb, struct us_data *us,
@@ -216,7 +217,7 @@ int freecom_transport(Scsi_Cmnd *srb, struct us_data *us)
 	/* There are times we can optimize out this status read, but it
 	 * doesn't hurt us to always do it now. */
 	result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
-			FCM_PACKET_LENGTH, &partial);
+			FCM_STATUS_PACKET_LENGTH, &partial);
 	US_DEBUGP("foo Status result %d %u\n", result, partial);
 	if (result != USB_STOR_XFER_GOOD)
 		return USB_STOR_TRANSPORT_ERROR;
@@ -256,10 +257,10 @@ int freecom_transport(Scsi_Cmnd *srb, struct us_data *us)
 
 		/* get the data */
 		result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
-				FCM_PACKET_LENGTH, &partial);
+				FCM_STATUS_PACKET_LENGTH, &partial);
 
 		US_DEBUGP("bar Status result %d %u\n", result, partial);
-		if (result > USB_STOR_XFER_SHORT)
+		if (result != USB_STOR_XFER_GOOD)
 			return USB_STOR_TRANSPORT_ERROR;
 
 		US_DEBUG(pdump ((void *) fst, partial));
@@ -302,6 +303,9 @@ int freecom_transport(Scsi_Cmnd *srb, struct us_data *us)
 
 	switch (us->srb->sc_data_direction) {
 	case SCSI_DATA_READ:
+		/* catch bogus "read 0 length" case */
+		if (!length)
+			break;
 		/* Make sure that the status indicates that the device
 		 * wants data as well. */
 		if ((fst->Status & DRQ_STAT) == 0 || (fst->Reason & 3) != 2) {
@@ -331,6 +335,9 @@ int freecom_transport(Scsi_Cmnd *srb, struct us_data *us)
 		break;
 
 	case SCSI_DATA_WRITE:
+		/* catch bogus "write 0 length" case */
+		if (!length)
+			break;
 		/* Make sure the status indicates that the device wants to
 		 * send us data. */
 		/* !!IMPLEMENT!! */
@@ -362,6 +369,7 @@ int freecom_transport(Scsi_Cmnd *srb, struct us_data *us)
 		break;
 
 	default:
+		/* should never hit here -- filtered in usb.c */
 		US_DEBUGP ("freecom unimplemented direction: %d\n",
 				us->srb->sc_data_direction);
 		// Return fail, SCSI seems to handle this better.

drivers/usb/storage/unusual_devs.h

@@ -394,6 +394,12 @@ UNUSUAL_DEV( 0x0686, 0x4011, 0x0001, 0x0001,
 		"Dimage F300",
 		US_SC_SCSI, US_PR_BULK, NULL, 0 ),
 
+/* Reported by Miguel A. Fosas <amn3s1a@ono.com> */
+UNUSUAL_DEV(  0x0686, 0x4017, 0x0001, 0x0001,
+                "Minolta",
+                "DIMAGE E223",
+                US_SC_SCSI, US_PR_DEVICE, NULL, 0 ),
+
 UNUSUAL_DEV(  0x0693, 0x0002, 0x0100, 0x0100, 
 		"Hagiwara",
 		"FlashGate SmartMedia",
@@ -542,7 +548,7 @@ UNUSUAL_DEV(  0x07c4, 0xa400, 0x0000, 0xffff,
  * - They don't like the INQUIRY command. So we must handle this command
  *   of the SCSI layer ourselves.
  */
-UNUSUAL_DEV( 0x07cf, 0x1001, 0x1000, 0x9009,
+UNUSUAL_DEV( 0x07cf, 0x1001, 0x1000, 0x5009,
 		"Casio",
 		"QV DigitalCamera",
 		US_SC_8070, US_PR_CB, NULL,

include/linux/usb.h

@@ -1038,9 +1038,9 @@ void usb_show_string(struct usb_device *dev, char *id, int index);
 #define dbg(format, arg...) do {} while (0)
 #endif
 
-#define err(format, arg...) printk(KERN_ERR __FILE__ ": " format "\n" , ## arg)
-#define info(format, arg...) printk(KERN_INFO __FILE__ ": " format "\n" , ## arg)
-#define warn(format, arg...) printk(KERN_WARNING __FILE__ ": " format "\n" , ## arg)
+#define err(format, arg...) printk(KERN_ERR "%s: " format "\n" , __FILE__ , ## arg)
+#define info(format, arg...) printk(KERN_INFO "%s: " format "\n" , __FILE__ , ## arg)
+#define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n" , __FILE__ , ## arg)
 
 
 #endif  /* __KERNEL__ */