Merge remote-tracking branches 'asoc/fix/arizona', 'asoc/fix/dpcm',...

Merge remote-tracking branches 'asoc/fix/arizona', 'asoc/fix/dpcm', 'asoc/fix/dwc', 'asoc/fix/fsl-ssi' and 'asoc/fix/hdmi-codec' into asoc-linus

include/sound/hdmi-codec.h

@@ -36,10 +36,10 @@ struct hdmi_codec_daifmt {
 		HDMI_AC97,
 		HDMI_SPDIF,
 	} fmt;
-	int bit_clk_inv:1;
-	int frame_clk_inv:1;
-	int bit_clk_master:1;
-	int frame_clk_master:1;
+	unsigned int bit_clk_inv:1;
+	unsigned int frame_clk_inv:1;
+	unsigned int bit_clk_master:1;
+	unsigned int frame_clk_master:1;
 };
 
 /*

sound/soc/codecs/wm_adsp.c

@@ -1551,7 +1551,7 @@ static int wm_adsp_load(struct wm_adsp *dsp)
 	const struct wmfw_region *region;
 	const struct wm_adsp_region *mem;
 	const char *region_name;
-	char *file, *text;
+	char *file, *text = NULL;
 	struct wm_adsp_buf *buf;
 	unsigned int reg;
 	int regions = 0;
@@ -1700,10 +1700,21 @@ static int wm_adsp_load(struct wm_adsp *dsp)
 			 regions, le32_to_cpu(region->len), offset,
 			 region_name);
 
+		if ((pos + le32_to_cpu(region->len) + sizeof(*region)) >
+		    firmware->size) {
+			adsp_err(dsp,
+				 "%s.%d: %s region len %d bytes exceeds file length %zu\n",
+				 file, regions, region_name,
+				 le32_to_cpu(region->len), firmware->size);
+			ret = -EINVAL;
+			goto out_fw;
+		}
+
 		if (text) {
 			memcpy(text, region->data, le32_to_cpu(region->len));
 			adsp_info(dsp, "%s: %s\n", file, text);
 			kfree(text);
+			text = NULL;
 		}
 
 		if (reg) {
@@ -1748,6 +1759,7 @@ static int wm_adsp_load(struct wm_adsp *dsp)
 	regmap_async_complete(regmap);
 	wm_adsp_buf_free(&buf_list);
 	release_firmware(firmware);
+	kfree(text);
 out:
 	kfree(file);
 
@@ -2233,6 +2245,17 @@ static int wm_adsp_load_coeff(struct wm_adsp *dsp)
 		}
 
 		if (reg) {
+			if ((pos + le32_to_cpu(blk->len) + sizeof(*blk)) >
+			    firmware->size) {
+				adsp_err(dsp,
+					 "%s.%d: %s region len %d bytes exceeds file length %zu\n",
+					 file, blocks, region_name,
+					 le32_to_cpu(blk->len),
+					 firmware->size);
+				ret = -EINVAL;
+				goto out_fw;
+			}
+
 			buf = wm_adsp_buf_alloc(blk->data,
 						le32_to_cpu(blk->len),
 						&buf_list);

sound/soc/dwc/designware_i2s.c

@@ -681,22 +681,19 @@ static int dw_i2s_probe(struct platform_device *pdev)
 	}
 
 	if (!pdata) {
-		ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0);
-		if (ret == -EPROBE_DEFER) {
-			dev_err(&pdev->dev,
-				"failed to register PCM, deferring probe\n");
-			return ret;
-		} else if (ret) {
-			dev_err(&pdev->dev,
-				"Could not register DMA PCM: %d\n"
-				"falling back to PIO mode\n", ret);
+		if (irq >= 0) {
 			ret = dw_pcm_register(pdev);
-			if (ret) {
-				dev_err(&pdev->dev,
-					"Could not register PIO PCM: %d\n",
+			dev->use_pio = true;
+		} else {
+			ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL,
+					0);
+			dev->use_pio = false;
+		}
+
+		if (ret) {
+			dev_err(&pdev->dev, "could not register pcm: %d\n",
 					ret);
-				goto err_clk_disable;
-			}
+			goto err_clk_disable;
 		}
 	}
 

sound/soc/fsl/fsl_ssi.c

@@ -224,6 +224,12 @@ struct fsl_ssi_soc_data {
  * @dbg_stats: Debugging statistics
  *
  * @soc: SoC specific data
+ *
+ * @fifo_watermark: the FIFO watermark setting.  Notifies DMA when
+ *             there are @fifo_watermark or fewer words in TX fifo or
+ *             @fifo_watermark or more empty words in RX fifo.
+ * @dma_maxburst: max number of words to transfer in one go.  So far,
+ *             this is always the same as fifo_watermark.
  */
 struct fsl_ssi_private {
 	struct regmap *regs;
@@ -263,6 +269,9 @@ struct fsl_ssi_private {
 
 	const struct fsl_ssi_soc_data *soc;
 	struct device *dev;
+
+	u32 fifo_watermark;
+	u32 dma_maxburst;
 };
 
 /*
@@ -1051,21 +1060,7 @@ static int _fsl_ssi_set_dai_fmt(struct device *dev,
 	regmap_write(regs, CCSR_SSI_SRCR, srcr);
 	regmap_write(regs, CCSR_SSI_SCR, scr);
 
-	/*
-	 * Set the watermark for transmit FIFI 0 and receive FIFO 0. We don't
-	 * use FIFO 1. We program the transmit water to signal a DMA transfer
-	 * if there are only two (or fewer) elements left in the FIFO. Two
-	 * elements equals one frame (left channel, right channel). This value,
-	 * however, depends on the depth of the transmit buffer.
-	 *
-	 * We set the watermark on the same level as the DMA burstsize.  For
-	 * fiq it is probably better to use the biggest possible watermark
-	 * size.
-	 */
-	if (ssi_private->use_dma)
-		wm = ssi_private->fifo_depth - 2;
-	else
-		wm = ssi_private->fifo_depth;
+	wm = ssi_private->fifo_watermark;
 
 	regmap_write(regs, CCSR_SSI_SFCSR,
 			CCSR_SSI_SFCSR_TFWM0(wm) | CCSR_SSI_SFCSR_RFWM0(wm) |
@@ -1373,12 +1368,8 @@ static int fsl_ssi_imx_probe(struct platform_device *pdev,
 		dev_dbg(&pdev->dev, "could not get baud clock: %ld\n",
 			 PTR_ERR(ssi_private->baudclk));
 
-	/*
-	 * We have burstsize be "fifo_depth - 2" to match the SSI
-	 * watermark setting in fsl_ssi_startup().
-	 */
-	ssi_private->dma_params_tx.maxburst = ssi_private->fifo_depth - 2;
-	ssi_private->dma_params_rx.maxburst = ssi_private->fifo_depth - 2;
+	ssi_private->dma_params_tx.maxburst = ssi_private->dma_maxburst;
+	ssi_private->dma_params_rx.maxburst = ssi_private->dma_maxburst;
 	ssi_private->dma_params_tx.addr = ssi_private->ssi_phys + CCSR_SSI_STX0;
 	ssi_private->dma_params_rx.addr = ssi_private->ssi_phys + CCSR_SSI_SRX0;
 
@@ -1543,6 +1534,47 @@ static int fsl_ssi_probe(struct platform_device *pdev)
                 /* Older 8610 DTs didn't have the fifo-depth property */
 		ssi_private->fifo_depth = 8;
 
+	/*
+	 * Set the watermark for transmit FIFO 0 and receive FIFO 0. We don't
+	 * use FIFO 1 but set the watermark appropriately nontheless.
+	 * We program the transmit water to signal a DMA transfer
+	 * if there are N elements left in the FIFO. For chips with 15-deep
+	 * FIFOs, set watermark to 8.  This allows the SSI to operate at a
+	 * high data rate without channel slipping. Behavior is unchanged
+	 * for the older chips with a fifo depth of only 8.  A value of 4
+	 * might be appropriate for the older chips, but is left at
+	 * fifo_depth-2 until sombody has a chance to test.
+	 *
+	 * We set the watermark on the same level as the DMA burstsize.  For
+	 * fiq it is probably better to use the biggest possible watermark
+	 * size.
+	 */
+	switch (ssi_private->fifo_depth) {
+	case 15:
+		/*
+		 * 2 samples is not enough when running at high data
+		 * rates (like 48kHz @ 16 bits/channel, 16 channels)
+		 * 8 seems to split things evenly and leave enough time
+		 * for the DMA to fill the FIFO before it's over/under
+		 * run.
+		 */
+		ssi_private->fifo_watermark = 8;
+		ssi_private->dma_maxburst = 8;
+		break;
+	case 8:
+	default:
+		/*
+		 * maintain old behavior for older chips.
+		 * Keeping it the same because I don't have an older
+		 * board to test with.
+		 * I suspect this could be changed to be something to
+		 * leave some more space in the fifo.
+		 */
+		ssi_private->fifo_watermark = ssi_private->fifo_depth - 2;
+		ssi_private->dma_maxburst = ssi_private->fifo_depth - 2;
+		break;
+	}
+
 	dev_set_drvdata(&pdev->dev, ssi_private);
 
 	if (ssi_private->soc->imx) {

sound/soc/soc-pcm.c

@@ -2184,9 +2184,11 @@ static int dpcm_fe_dai_do_trigger(struct snd_pcm_substream *substream, int cmd)
 		break;
 	case SNDRV_PCM_TRIGGER_STOP:
 	case SNDRV_PCM_TRIGGER_SUSPEND:
-	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
 		fe->dpcm[stream].state = SND_SOC_DPCM_STATE_STOP;
 		break;
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		fe->dpcm[stream].state = SND_SOC_DPCM_STATE_PAUSED;
+		break;
 	}
 
 out: