Merge tag 'samsung-soc-5.20' of...

Merge tag 'samsung-soc-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc

Samsung mach/soc changes for v5.20

1. Use preferred strscpy() over strlcpy().
2. Kconfig indentation cleanup.

* tag 'samsung-soc-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: s3c: Kconfig.s3c64xx: Fix indentation
  ARM: s3c: Kconfig.s3c24xx: Fix indentation and replace some tabs
  ARM: s3c: Kconfig: Fix indentation
  ARM: s3c: Use strscpy to replace strlcpy

Link: https://lore.kernel.org/r/20220624080746.31947-3-krzysztof.kozlowski@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/mach-s3c/Kconfig

@@ -43,12 +43,12 @@ config SAMSUNG_ATAGS
 	def_bool n
 	depends on ATAGS
 	help
-	   This option enables ATAGS based boot support code for
-	   Samsung platforms, including static platform devices, legacy
-	   clock, timer and interrupt initialization, etc.
+	  This option enables ATAGS based boot support code for
+	  Samsung platforms, including static platform devices, legacy
+	  clock, timer and interrupt initialization, etc.
 
-	   Platforms that support only DT based boot need not to select
-	   this option.
+	  Platforms that support only DT based boot need not to select
+	  this option.
 
 if SAMSUNG_ATAGS
 
@@ -102,7 +102,7 @@ config S3C_DEV_HSMMC3
 config S3C_DEV_HWMON
 	bool
 	help
-	    Compile in platform device definitions for HWMON
+	  Compile in platform device definitions for HWMON
 
 config S3C_DEV_I2C1
 	bool
@@ -194,7 +194,7 @@ config S3C64XX_DEV_SPI0
 config SAMSUNG_DEV_TS
 	bool
 	help
-	    Common in platform device definitions for touchscreen device
+	  Common in platform device definitions for touchscreen device
 
 config SAMSUNG_DEV_KEYPAD
 	bool

arch/arm/mach-s3c/Kconfig.s3c24xx

@@ -37,8 +37,6 @@ config PLAT_S3C24XX
 	help
 	  Base platform code for any Samsung S3C24XX device
 
-
-
 menu "Samsung S3C24XX SoCs Support"
 
 comment "S3C24XX SoCs"
@@ -293,7 +291,7 @@ config MACH_VR1000
 	help
 	  Say Y here if you are using the Thorcom VR1000 board.
 
-endif	# CPU_S3C2410
+endif # CPU_S3C2410
 
 config S3C2412_PM_SLEEP
 	bool
@@ -367,7 +365,7 @@ config MACH_VSTMS
 	help
 	  Say Y here if you are using an VSTMS board
 
-endif	# CPU_S3C2412
+endif # CPU_S3C2412
 
 if CPU_S3C2416
 
@@ -415,7 +413,7 @@ config MACH_S3C2416_DT
 	  Note: This is under development and not all peripherals can be supported
 	  with this machine file.
 
-endif	# CPU_S3C2416
+endif # CPU_S3C2416
 
 if CPU_S3C2440 || CPU_S3C2442
 
@@ -444,7 +442,7 @@ config S3C2440_PLL_16934400
 	default y if S3C24XX_PLL
 	help
 	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
-endif
+endif # CPU_S3C2440 || CPU_S3C2442
 
 if CPU_S3C2440
 
@@ -540,7 +538,7 @@ config SMDK2440_CPU2440
 	default y if ARCH_S3C2440
 	select S3C2440_XTAL_16934400
 
-endif	# CPU_S3C2440
+endif # CPU_S3C2440
 
 if CPU_S3C2442
 
@@ -559,7 +557,7 @@ config MACH_NEO1973_GTA02
 	select POWER_SUPPLY
 	select S3C_DEV_USB_HOST
 	help
-	   Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
+	  Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
 
 config MACH_RX1950
 	bool "HP iPAQ rx1950"
@@ -570,9 +568,9 @@ config MACH_RX1950
 	select S3C2440_XTAL_16934400
 	select S3C_DEV_NAND
 	help
-	   Say Y here if you're using HP iPAQ rx1950
+	  Say Y here if you're using HP iPAQ rx1950
 
-endif	# CPU_S3C2442
+endif # CPU_S3C2442
 
 if CPU_S3C2443 || CPU_S3C2416
 
@@ -581,7 +579,7 @@ config S3C2443_SETUP_SPI
 	help
 	  Common setup code for SPI GPIO configurations
 
-endif	# CPU_S3C2443 || CPU_S3C2416
+endif # CPU_S3C2443 || CPU_S3C2416
 
 if CPU_S3C2443
 
@@ -594,13 +592,13 @@ config MACH_SMDK2443
 	help
 	  Say Y here if you are using an SMDK2443
 
-endif	# CPU_S3C2443
+endif # CPU_S3C2443
 
 config PM_H1940
 	bool
 	help
 	  Internal node for H1940 and related PM
 
-endmenu	# Samsung S3C24XX SoCs Support
+endmenu # "Samsung S3C24XX SoCs Support"
 
-endif	# ARCH_S3C24XX
+endif # ARCH_S3C24XX

arch/arm/mach-s3c/Kconfig.s3c64xx

@@ -104,7 +104,7 @@ config S3C64XX_SETUP_SDHCI_GPIO
 config S3C64XX_SETUP_SPI
 	bool
 	help
-	 Common setup code for SPI GPIO configurations
+	  Common setup code for SPI GPIO configurations
 
 config S3C64XX_SETUP_USB_PHY
 	bool
@@ -114,7 +114,7 @@ config S3C64XX_SETUP_USB_PHY
 # S36400 Macchine support
 
 config MACH_SMDK6400
-       bool "SMDK6400"
+	bool "SMDK6400"
 	depends on ATAGS
 	select CPU_S3C6400
 	select S3C64XX_SETUP_SDHCI
@@ -205,7 +205,7 @@ config SMDK6410_SD_CH0
 	bool "Use channel 0 only"
 	depends on MACH_SMDK6410
 	help
-          Select CON7 (channel 0) as the MMC/SD slot, as
+	  Select CON7 (channel 0) as the MMC/SD slot, as
 	  at least some SMDK6410 boards come with the
 	  resistors fitted so that the card detects for
 	  channels 0 and 1 are the same.
@@ -214,7 +214,7 @@ config SMDK6410_SD_CH1
 	bool "Use channel 1 only"
 	depends on MACH_SMDK6410
 	help
-          Select CON6 (channel 1) as the MMC/SD slot, as
+	  Select CON6 (channel 1) as the MMC/SD slot, as
 	  at least some SMDK6410 boards come with the
 	  resistors fitted so that the card detects for
 	  channels 0 and 1 are the same.
@@ -260,7 +260,7 @@ config MACH_NCP
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_I2C1
 	help
-          Machine support for the Samsung NCP
+	  Machine support for the Samsung NCP
 
 config MACH_HMT
 	bool "Airgoo HMT"
@@ -292,21 +292,21 @@ config MACH_SMARTQ
 	select SAMSUNG_DEV_PWM
 	select SAMSUNG_DEV_TS
 	help
-	    Shared machine support for SmartQ 5/7
+	  Shared machine support for SmartQ 5/7
 
 config MACH_SMARTQ5
 	bool "SmartQ 5"
 	depends on ATAGS
 	select MACH_SMARTQ
 	help
-	    Machine support for the SmartQ 5
+	  Machine support for the SmartQ 5
 
 config MACH_SMARTQ7
 	bool "SmartQ 7"
 	depends on ATAGS
 	select MACH_SMARTQ
 	help
-	    Machine support for the SmartQ 7
+	  Machine support for the SmartQ 7
 
 config MACH_WLF_CRAGG_6410
 	bool "Wolfson Cragganmore 6410"

arch/arm/mach-s3c/mach-mini2440.c

@@ -624,7 +624,7 @@ static char mini2440_features_str[12] __initdata = "0tb";
 static int __init mini2440_features_setup(char *str)
 {
 	if (str)
-		strlcpy(mini2440_features_str, str,
+		strscpy(mini2440_features_str, str,
 			sizeof(mini2440_features_str));
 	return 1;
 }