Commit 1c7fae18 authored by Bjorn Helgaas's avatar Bjorn Helgaas

PCI: imx6: Use "u32", not "uint32_t"

Use "u32", not "uint32_t", for consistency.  Use "tmp", not "temp", for
consistency within the driver.
Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
Acked-by: default avatarRichard Zhu <Richard.Zhu@freescale.com>
parent a0427464
......@@ -354,7 +354,7 @@ static int imx6_pcie_wait_for_link(struct pcie_port *pp)
static int imx6_pcie_wait_for_speed_change(struct pcie_port *pp)
{
uint32_t tmp;
u32 tmp;
unsigned int retries;
for (retries = 0; retries < 200; retries++) {
......@@ -379,7 +379,7 @@ static irqreturn_t imx6_pcie_msi_handler(int irq, void *arg)
static int imx6_pcie_start_link(struct pcie_port *pp)
{
struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
uint32_t tmp;
u32 tmp;
int ret;
/*
......@@ -450,19 +450,19 @@ static void imx6_pcie_host_init(struct pcie_port *pp)
static void imx6_pcie_reset_phy(struct pcie_port *pp)
{
uint32_t temp;
u32 tmp;
pcie_phy_read(pp->dbi_base, PHY_RX_OVRD_IN_LO, &temp);
temp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN |
PHY_RX_OVRD_IN_LO_RX_PLL_EN);
pcie_phy_write(pp->dbi_base, PHY_RX_OVRD_IN_LO, temp);
pcie_phy_read(pp->dbi_base, PHY_RX_OVRD_IN_LO, &tmp);
tmp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN |
PHY_RX_OVRD_IN_LO_RX_PLL_EN);
pcie_phy_write(pp->dbi_base, PHY_RX_OVRD_IN_LO, tmp);
usleep_range(2000, 3000);
pcie_phy_read(pp->dbi_base, PHY_RX_OVRD_IN_LO, &temp);
temp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN |
pcie_phy_read(pp->dbi_base, PHY_RX_OVRD_IN_LO, &tmp);
tmp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN |
PHY_RX_OVRD_IN_LO_RX_PLL_EN);
pcie_phy_write(pp->dbi_base, PHY_RX_OVRD_IN_LO, temp);
pcie_phy_write(pp->dbi_base, PHY_RX_OVRD_IN_LO, tmp);
}
static int imx6_pcie_link_up(struct pcie_port *pp)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment