ARM: dts: qcom: correct mmc node naming

MMC nodes has to be named mmc@ to comply with dt-bindings.

Fix warnings as:
arch/arm/boot/dts/qcom-msm8660-surf.dt.yaml: sdcc@12400000: $nodename:0: 'sdcc@12400000' does not match '^mmc(@.*)?$'
	From schema: Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211020201440.229196-1-david@ixit.cz

arch/arm/boot/dts/qcom-apq8060-dragonboard.dts

@@ -899,7 +899,7 @@ ncp {
 		};
 		amba {
 			/* Internal 3.69 GiB eMMC */
-			sdcc@12400000 {
+			mmc@12400000 {
 				status = "okay";
 				pinctrl-names = "default";
 				pinctrl-0 = <&dragon_sdcc1_pins>;
@@ -908,7 +908,7 @@ sdcc@12400000 {
 			};
 
 			/* External micro SD card, directly connected, pulled up to 2.85 V */
-			sdcc@12180000 {
+			mmc@12180000 {
 				status = "okay";
 				/* Enable SSBI GPIO 22 as input, use for card detect */
 				pinctrl-names = "default";
@@ -922,7 +922,7 @@ sdcc@12180000 {
 			 * Second external micro SD card, using two TXB104RGYR levelshifters
 			 * to lift from 1.8 V to 2.85 V
 			 */
-			sdcc@12200000 {
+			mmc@12200000 {
 				status = "okay";
 				/* Enable SSBI GPIO 26 as input, use for card detect */
 				pinctrl-names = "default";

arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts

@@ -335,7 +335,7 @@ phy {
 
 		amba {
 			/* eMMC */
-			sdcc@12400000 {
+			mmc@12400000 {
 				status = "okay";
 				vmmc-supply = <&pm8921_l5>;
 				vqmmc-supply = <&pm8921_s4>;

arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts

@@ -220,14 +220,14 @@ pci@1b500000 {
 
 		amba {
 			/* eMMC */
-			sdcc1: sdcc@12400000 {
+			sdcc1: mmc@12400000 {
 				status = "okay";
 				vmmc-supply = <&pm8921_l5>;
 				vqmmc-supply = <&pm8921_s4>;
 			};
 
 			/* External micro SD card */
-			sdcc3: sdcc@12180000 {
+			sdcc3: mmc@12180000 {
 				status = "okay";
 				vmmc-supply = <&v3p3_fixed>;
 				pinctrl-names	= "default";
@@ -235,7 +235,7 @@ sdcc3: sdcc@12180000 {
 				cd-gpios	= <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
 			};
 			/* WLAN */
-			sdcc4: sdcc@121c0000 {
+			sdcc4: mmc@121c0000 {
 				status = "okay";
 				vmmc-supply = <&v3p3_fixed>;
 				vqmmc-supply = <&v3p3_fixed>;

arch/arm/boot/dts/qcom-apq8064-ifc6410.dts

@@ -314,14 +314,14 @@ pios {
 
 		amba {
 			/* eMMC */
-			sdcc1: sdcc@12400000 {
+			sdcc1: mmc@12400000 {
 				status = "okay";
 				vmmc-supply = <&pm8921_l5>;
 				vqmmc-supply = <&pm8921_s4>;
 			};
 
 			/* External micro SD card */
-			sdcc3: sdcc@12180000 {
+			sdcc3: mmc@12180000 {
 				status = "okay";
 				vmmc-supply = <&pm8921_l6>;
 				pinctrl-names	= "default";
@@ -329,7 +329,7 @@ sdcc3: sdcc@12180000 {
 				cd-gpios	= <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
 			};
 			/* WLAN */
-			sdcc4: sdcc@121c0000 {
+			sdcc4: mmc@121c0000 {
 				status = "okay";
 				vmmc-supply = <&ext_3p3v>;
 				vqmmc-supply = <&pm8921_lvs1>;

arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts

@@ -374,14 +374,14 @@ serial@1a240000 {
 		};
 
 		amba {
-			sdcc1: sdcc@12400000 {
+			sdcc1: mmc@12400000 {
 				status = "okay";
 
 				vmmc-supply = <&pm8921_l5>;
 				vqmmc-supply = <&pm8921_s4>;
 			};
 
-			sdcc3: sdcc@12180000 {
+			sdcc3: mmc@12180000 {
 				status = "okay";
 
 				vmmc-supply = <&pm8921_l6>;

arch/arm/boot/dts/qcom-apq8064.dtsi

@@ -1073,7 +1073,7 @@ amba {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
-			sdcc1: sdcc@12400000 {
+			sdcc1: mmc@12400000 {
 				status		= "disabled";
 				compatible	= "arm,pl18x", "arm,primecell";
 				pinctrl-names	= "default";
@@ -1093,7 +1093,7 @@ sdcc1: sdcc@12400000 {
 				dma-names = "tx", "rx";
 			};
 
-			sdcc3: sdcc@12180000 {
+			sdcc3: mmc@12180000 {
 				compatible	= "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
 				status		= "disabled";
@@ -1111,7 +1111,7 @@ sdcc3: sdcc@12180000 {
 				dma-names = "tx", "rx";
 			};
 
-			sdcc4: sdcc@121c0000 {
+			sdcc4: mmc@121c0000 {
 				compatible	= "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
 				status		= "disabled";

arch/arm/boot/dts/qcom-ipq8064.dtsi

@@ -1181,7 +1181,7 @@ amba: amba {
 			#size-cells = <1>;
 			ranges;
 
-			sdcc1: sdcc@12400000 {
+			sdcc1: mmc@12400000 {
 				status          = "disabled";
 				compatible      = "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
@@ -1201,7 +1201,7 @@ sdcc1: sdcc@12400000 {
 				dma-names = "tx", "rx";
 			};
 
-			sdcc3: sdcc@12180000 {
+			sdcc3: mmc@12180000 {
 				compatible      = "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
 				status          = "disabled";

arch/arm/boot/dts/qcom-mdm9615.dtsi

@@ -354,7 +354,7 @@ amba {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
-			sdcc1: sdcc@12180000 {
+			sdcc1: mmc@12180000 {
 				status = "disabled";
 				compatible = "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
@@ -374,7 +374,7 @@ sdcc1: sdcc@12180000 {
 				assigned-clock-rates = <400000>;
 			};
 
-			sdcc2: sdcc@12140000 {
+			sdcc2: mmc@12140000 {
 				compatible = "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
 				status = "disabled";

arch/arm/boot/dts/qcom-msm8660-surf.dts

@@ -35,13 +35,13 @@ vsdcc_fixed: vsdcc-regulator {
 
 		amba {
 			/* eMMC */
-			sdcc1: sdcc@12400000 {
+			sdcc1: mmc@12400000 {
 				status = "okay";
 				vmmc-supply = <&vsdcc_fixed>;
 			};
 
 			/* External micro SD card */
-			sdcc3: sdcc@12180000 {
+			sdcc3: mmc@12180000 {
 				status = "okay";
 				vmmc-supply = <&vsdcc_fixed>;
 			};

arch/arm/boot/dts/qcom-msm8660.dtsi

@@ -483,7 +483,7 @@ amba {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
-			sdcc1: sdcc@12400000 {
+			sdcc1: mmc@12400000 {
 				status		= "disabled";
 				compatible	= "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
@@ -499,7 +499,7 @@ sdcc1: sdcc@12400000 {
 				cap-mmc-highspeed;
 			};
 
-			sdcc2: sdcc@12140000 {
+			sdcc2: mmc@12140000 {
 				status		= "disabled";
 				compatible	= "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
@@ -514,7 +514,7 @@ sdcc2: sdcc@12140000 {
 				cap-mmc-highspeed;
 			};
 
-			sdcc3: sdcc@12180000 {
+			sdcc3: mmc@12180000 {
 				compatible	= "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
 				status		= "disabled";
@@ -530,7 +530,7 @@ sdcc3: sdcc@12180000 {
 				no-1-8-v;
 			};
 
-			sdcc4: sdcc@121c0000 {
+			sdcc4: mmc@121c0000 {
 				compatible	= "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
 				status		= "disabled";
@@ -545,7 +545,7 @@ sdcc4: sdcc@121c0000 {
 				cap-mmc-highspeed;
 			};
 
-			sdcc5: sdcc@12200000 {
+			sdcc5: mmc@12200000 {
 				compatible	= "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
 				status		= "disabled";

arch/arm/boot/dts/qcom-msm8960-cdp.dts

@@ -26,12 +26,12 @@ serial@16440000 {
 
 		amba {
 			/* eMMC */
-			sdcc1: sdcc@12400000 {
+			sdcc1: mmc@12400000 {
 				status = "okay";
 			};
 
 			/* External micro SD card */
-			sdcc3: sdcc@12180000 {
+			sdcc3: mmc@12180000 {
 				status = "okay";
 			};
 		};

arch/arm/boot/dts/qcom-msm8960.dtsi

@@ -263,7 +263,7 @@ amba {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
-			sdcc1: sdcc@12400000 {
+			sdcc1: mmc@12400000 {
 				status		= "disabled";
 				compatible	= "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
@@ -280,7 +280,7 @@ sdcc1: sdcc@12400000 {
 				vmmc-supply = <&vsdcc_fixed>;
 			};
 
-			sdcc3: sdcc@12180000 {
+			sdcc3: mmc@12180000 {
 				compatible	= "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
 				status		= "disabled";