[POWERPC] maple: Kill fixup_maple_ide

This function has been a no-op for about 18 months; it's there in
the history should anyone need to resurrect it.
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

arch/powerpc/platforms/maple/pci.c

@@ -592,50 +592,3 @@ int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel)
 	}
 	return irq;
 }
-
-/* XXX: To remove once all firmwares are ok */
-static void fixup_maple_ide(struct pci_dev* dev)
-{
-	if (!machine_is(maple))
-		return;
-
-#if 0 /* Enable this to enable IDE port 0 */
-	{
-		u8 v;
-
-		pci_read_config_byte(dev, 0x40, &v);
-		v |= 2;
-		pci_write_config_byte(dev, 0x40, v);
-	}
-#endif
-#if 0 /* fix bus master base */
-	pci_write_config_dword(dev, 0x20, 0xcc01);
-	printk("old ide resource: %lx -> %lx \n",
-	       dev->resource[4].start, dev->resource[4].end);
-	dev->resource[4].start = 0xcc00;
-	dev->resource[4].end = 0xcc10;
-#endif
-#if 0 /* Enable this to fixup IDE sense/polarity of irqs in IO-APICs */
-	{
-		struct pci_dev *apicdev;
-		u32 v;
-
-		apicdev = pci_get_slot (dev->bus, PCI_DEVFN(5,0));
-		if (apicdev == NULL)
-			printk("IDE Fixup IRQ: Can't find IO-APIC !\n");
-		else {
-			pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*14);
-			pci_read_config_dword(apicdev, 0xf4, &v);
-			v &= ~0x00000022;
-			pci_write_config_dword(apicdev, 0xf4, v);
-			pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*15);
-			pci_read_config_dword(apicdev, 0xf4, &v);
-			v &= ~0x00000022;
-			pci_write_config_dword(apicdev, 0xf4, v);
-			pci_dev_put(apicdev);
-		}
-	}
-#endif
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_IDE,
-			 fixup_maple_ide);