Commit 1cea7326 authored by Colin Cross's avatar Colin Cross Committed by Erik Gilling

[ARM] tegra: SMP support

Signed-off-by: default avatarColin Cross <ccross@android.com>
Signed-off-by: default avatarErik Gilling <konkers@android.com>
parent d8611961
......@@ -1112,10 +1112,11 @@ config SMP
bool "Symmetric Multi-Processing (EXPERIMENTAL)"
depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\
ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_TEGRA)
depends on GENERIC_CLOCKEVENTS
select USE_GENERIC_SMP_HELPERS
select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500 || \
ARCH_VEXPRESS_CA9X4 || ARCH_TEGRA)
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
......@@ -1185,9 +1186,10 @@ config LOCAL_TIMERS
bool "Use local timer interrupts"
depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_TEGRA)
default y
select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_VEXPRESS || ARCH_OMAP4 || ARCH_U8500)
select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_VEXPRESS || ARCH_OMAP4 || \\
ARCH_U8500 || ARCH_TEGRA
help
Enable support for local timers on SMP platforms, rather then the
legacy IPI broadcast method. Local timers allows the system
......
......@@ -3,3 +3,5 @@ obj-y += io.o
obj-y += irq.o
obj-y += clock.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_clocks.o
obj-$(CONFIG_SMP) += platsmp.o localtimer.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
#include <linux/linkage.h>
#include <linux/init.h>
.section ".text.head", "ax"
__CPUINIT
/*
* Tegra specific entry point for secondary CPUs.
* The secondary kernel init calls v7_flush_dcache_all before it enables
* the L1; however, the L1 comes out of reset in an undefined state, so
* the clean + invalidate performed by v7_flush_dcache_all causes a bunch
* of cache lines with uninitialized data and uninitialized tags to get
* written out to memory, which does really unpleasant things to the main
* processor. We fix this by performing an invalidate, rather than a
* clean + invalidate, before jumping into the kernel.
*/
ENTRY(v7_invalidate_l1)
mov r0, #0
mcr p15, 2, r0, c0, c0, 0
mrc p15, 1, r0, c0, c0, 0
ldr r1, =0x7fff
and r2, r1, r0, lsr #13
ldr r1, =0x3ff
and r3, r1, r0, lsr #3 @ NumWays - 1
add r2, r2, #1 @ NumSets
and r0, r0, #0x7
add r0, r0, #4 @ SetShift
clz r1, r3 @ WayShift
add r4, r3, #1 @ NumWays
1: sub r2, r2, #1 @ NumSets--
mov r3, r4 @ Temp = NumWays
2: subs r3, r3, #1 @ Temp--
mov r5, r3, lsl r1
mov r6, r2, lsl r0
orr r5, r5, r6 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
mcr p15, 0, r5, c7, c6, 2
bgt 2b
cmp r2, #0
bgt 1b
dsb
isb
mov pc, lr
ENDPROC(v7_invalidate_l1)
ENTRY(tegra_secondary_startup)
msr cpsr_fsxc, #0xd3
bl v7_invalidate_l1
mrc p15, 0, r0, c0, c0, 5
and r0, r0, #15
ldr r1, =0x6000f100
str r0, [r1]
1: ldr r2, [r1]
cmp r0, r2
beq 1b
b secondary_startup
ENDPROC(tegra_secondary_startup)
/*
* linux/arch/arm/mach-realview/hotplug.c
*
* Copyright (C) 2002 ARM Ltd.
* All Rights Reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/smp.h>
#include <linux/completion.h>
#include <asm/cacheflush.h>
static DECLARE_COMPLETION(cpu_killed);
static inline void cpu_enter_lowpower(void)
{
unsigned int v;
flush_cache_all();
asm volatile(
" mcr p15, 0, %1, c7, c5, 0\n"
" mcr p15, 0, %1, c7, c10, 4\n"
/*
* Turn off coherency
*/
" mrc p15, 0, %0, c1, c0, 1\n"
" bic %0, %0, #0x20\n"
" mcr p15, 0, %0, c1, c0, 1\n"
" mrc p15, 0, %0, c1, c0, 0\n"
" bic %0, %0, #0x04\n"
" mcr p15, 0, %0, c1, c0, 0\n"
: "=&r" (v)
: "r" (0)
: "cc");
}
static inline void cpu_leave_lowpower(void)
{
unsigned int v;
asm volatile(
"mrc p15, 0, %0, c1, c0, 0\n"
" orr %0, %0, #0x04\n"
" mcr p15, 0, %0, c1, c0, 0\n"
" mrc p15, 0, %0, c1, c0, 1\n"
" orr %0, %0, #0x20\n"
" mcr p15, 0, %0, c1, c0, 1\n"
: "=&r" (v)
:
: "cc");
}
static inline void platform_do_lowpower(unsigned int cpu)
{
/*
* there is no power-control hardware on this platform, so all
* we can do is put the core into WFI; this is safe as the calling
* code will have already disabled interrupts
*/
for (;;) {
/*
* here's the WFI
*/
asm(".word 0xe320f003\n"
:
:
: "memory", "cc");
/*if (pen_release == cpu) {*/
/*
* OK, proper wakeup, we're done
*/
break;
/*}*/
/*
* getting here, means that we have come out of WFI without
* having been woken up - this shouldn't happen
*
* The trouble is, letting people know about this is not really
* possible, since we are currently running incoherently, and
* therefore cannot safely call printk() or anything else
*/
#ifdef DEBUG
printk(KERN_WARN "CPU%u: spurious wakeup call\n", cpu);
#endif
}
}
int platform_cpu_kill(unsigned int cpu)
{
return wait_for_completion_timeout(&cpu_killed, 5000);
}
/*
* platform-specific code to shutdown a CPU
*
* Called with IRQs disabled
*/
void platform_cpu_die(unsigned int cpu)
{
#ifdef DEBUG
unsigned int this_cpu = hard_smp_processor_id();
if (cpu != this_cpu) {
printk(KERN_CRIT "Eek! platform_cpu_die running on %u, should be %u\n",
this_cpu, cpu);
BUG();
}
#endif
printk(KERN_NOTICE "CPU%u: shutdown\n", cpu);
complete(&cpu_killed);
/*
* we're ready for shutdown now, so do it
*/
cpu_enter_lowpower();
platform_do_lowpower(cpu);
/*
* bring this CPU back into the world of cache
* coherency, and then restore interrupts
*/
cpu_leave_lowpower();
}
int platform_cpu_disable(unsigned int cpu)
{
/*
* we don't allow CPU 0 to be shutdown (it is still too special
* e.g. clock tick interrupts)
*/
return cpu == 0 ? -EPERM : 0;
}
#ifndef ASMARM_ARCH_SMP_H
#define ASMARM_ARCH_SMP_H
#include <asm/hardware/gic.h>
#define hard_smp_processor_id() \
({ \
unsigned int cpunum; \
__asm__("mrc p15, 0, %0, c0, c0, 5" \
: "=r" (cpunum)); \
cpunum &= 0x0F; \
})
/*
* We use IRQ1 as the IPI
*/
static inline void smp_cross_call(const struct cpumask *mask)
{
gic_raise_softirq(mask, 1);
}
/*
* Do nothing on MPcore.
*/
static inline void smp_cross_call_done(cpumask_t callmap)
{
}
#endif
/*
* arch/arm/mach-tegra/localtimer.c
*
* Copyright (C) 2002 ARM Ltd.
* All Rights Reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/clockchips.h>
#include <asm/irq.h>
#include <asm/smp_twd.h>
#include <asm/localtimer.h>
/*
* Setup the local clock events for a CPU.
*/
void __cpuinit local_timer_setup(struct clock_event_device *evt)
{
evt->irq = IRQ_LOCALTIMER;
twd_timer_setup(evt);
}
/*
* linux/arch/arm/mach-tegra/platsmp.c
*
* Copyright (C) 2002 ARM Ltd.
* All Rights Reserved
*
* Copyright (C) 2009 Palm
* All Rights Reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/jiffies.h>
#include <linux/smp.h>
#include <linux/io.h>
#include <asm/cacheflush.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/localtimer.h>
#include <asm/smp_scu.h>
#include <mach/iomap.h>
extern void tegra_secondary_startup(void);
static DEFINE_SPINLOCK(boot_lock);
static void __iomem *scu_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE);
#define EVP_CPU_RESET_VECTOR \
(IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE) + 0x100)
#define CLK_RST_CONTROLLER_CLK_CPU_CMPLX \
(IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x4c)
#define CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR \
(IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x344)
void __cpuinit platform_secondary_init(unsigned int cpu)
{
trace_hardirqs_off();
/*
* if any interrupts are already enabled for the primary
* core (e.g. timer irq), then they will not have been enabled
* for us: do so
*/
gic_cpu_init(0, IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x100);
/*
* Synchronise with the boot thread.
*/
spin_lock(&boot_lock);
spin_unlock(&boot_lock);
}
int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned long old_boot_vector;
unsigned long boot_vector;
unsigned long timeout;
u32 reg;
/*
* set synchronisation state between this boot processor
* and the secondary one
*/
spin_lock(&boot_lock);
/* set the reset vector to point to the secondary_startup routine */
boot_vector = virt_to_phys(tegra_secondary_startup);
old_boot_vector = readl(EVP_CPU_RESET_VECTOR);
writel(boot_vector, EVP_CPU_RESET_VECTOR);
/* enable cpu clock on cpu1 */
reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
writel(reg & ~(1<<9), CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
reg = (1<<13) | (1<<9) | (1<<5) | (1<<1);
writel(reg, CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR);
smp_wmb();
flush_cache_all();
/* unhalt the cpu */
writel(0, IO_ADDRESS(TEGRA_FLOW_CTRL_BASE) + 0x14);
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
if (readl(EVP_CPU_RESET_VECTOR) != boot_vector)
break;
udelay(10);
}
/* put the old boot vector back */
writel(old_boot_vector, EVP_CPU_RESET_VECTOR);
/*
* now the secondary core is starting up let it run its
* calibrations, then wait for it to finish
*/
spin_unlock(&boot_lock);
return 0;
}
/*
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
void __init smp_init_cpus(void)
{
unsigned int i, ncores = scu_get_core_count(scu_base);
for (i = 0; i < ncores; i++)
cpu_set(i, cpu_possible_map);
}
void __init smp_prepare_cpus(unsigned int max_cpus)
{
unsigned int ncores = scu_get_core_count(scu_base);
unsigned int cpu = smp_processor_id();
int i;
smp_store_cpu_info(cpu);
/*
* are we trying to boot more cores than exist?
*/
if (max_cpus > ncores)
max_cpus = ncores;
/*
* Initialise the present map, which describes the set of CPUs
* actually populated at the present time.
*/
for (i = 0; i < max_cpus; i++)
set_cpu_present(i, true);
/*
* Initialise the SCU if there are more than one CPU and let
* them know where to start. Note that, on modern versions of
* MILO, the "poke" doesn't actually do anything until each
* individual core is sent a soft interrupt to get it out of
* WFI
*/
if (max_cpus > 1) {
percpu_timer_setup();
scu_enable(scu_base);
}
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment