Commit 1d38e421 authored by Yakir Yang's avatar Yakir Yang Committed by Heiko Stuebner

drm/bridge: analogix_dp: detect Sink PSR state after configuring the PSR

Make sure the request PSR state takes effect in analogix_dp_send_psr_spd()
function, or print the sink PSR error state if we failed to apply the
requested PSR setting.

Cc: 征增 王 <wzz@rock-chips.com>
Cc: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: default avatarYakir Yang <ykk@rock-chips.com>
[seanpaul changed timeout loop to a readx poll]
Signed-off-by: default avatarSean Paul <seanpaul@chromium.org>
Signed-off-by: default avatarThierry Escande <thierry.escande@collabora.com>
Signed-off-by: default avatarEnric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: default avatarMarek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: default avatarArchit Taneja <architt@codeaurora.org>
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180309222327.18689-2-enric.balletbo@collabora.com
parent 2c17a436
......@@ -122,8 +122,7 @@ int analogix_dp_enable_psr(struct analogix_dp_device *dp)
psr_vsc.DB0 = 0;
psr_vsc.DB1 = EDP_VSC_PSR_STATE_ACTIVE | EDP_VSC_PSR_CRC_VALUES_VALID;
analogix_dp_send_psr_spd(dp, &psr_vsc);
return 0;
return analogix_dp_send_psr_spd(dp, &psr_vsc);
}
EXPORT_SYMBOL_GPL(analogix_dp_enable_psr);
......@@ -149,8 +148,7 @@ int analogix_dp_disable_psr(struct analogix_dp_device *dp)
if (ret != 1)
dev_err(dp->dev, "Failed to set DP Power0 %d\n", ret);
analogix_dp_send_psr_spd(dp, &psr_vsc);
return 0;
return analogix_dp_send_psr_spd(dp, &psr_vsc);
}
EXPORT_SYMBOL_GPL(analogix_dp_disable_psr);
......
......@@ -20,6 +20,8 @@
#define MAX_CR_LOOP 5
#define MAX_EQ_LOOP 5
#define DP_TIMEOUT_PSR_LOOP_MS 300
/* DP_MAX_LANE_COUNT */
#define DPCD_ENHANCED_FRAME_CAP(x) (((x) >> 7) & 0x1)
#define DPCD_MAX_LANE_COUNT(x) ((x) & 0x1f)
......@@ -247,8 +249,8 @@ void analogix_dp_config_video_slave_mode(struct analogix_dp_device *dp);
void analogix_dp_enable_scrambling(struct analogix_dp_device *dp);
void analogix_dp_disable_scrambling(struct analogix_dp_device *dp);
void analogix_dp_enable_psr_crc(struct analogix_dp_device *dp);
void analogix_dp_send_psr_spd(struct analogix_dp_device *dp,
struct edp_vsc_psr *vsc);
int analogix_dp_send_psr_spd(struct analogix_dp_device *dp,
struct edp_vsc_psr *vsc);
ssize_t analogix_dp_transfer(struct analogix_dp_device *dp,
struct drm_dp_aux_msg *msg);
......
......@@ -10,10 +10,11 @@
* option) any later version.
*/
#include <linux/device.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <drm/bridge/analogix_dp.h>
......@@ -992,10 +993,25 @@ void analogix_dp_enable_psr_crc(struct analogix_dp_device *dp)
writel(PSR_VID_CRC_ENABLE, dp->reg_base + ANALOGIX_DP_CRC_CON);
}
void analogix_dp_send_psr_spd(struct analogix_dp_device *dp,
struct edp_vsc_psr *vsc)
static ssize_t analogix_dp_get_psr_status(struct analogix_dp_device *dp)
{
ssize_t val;
u8 status;
val = drm_dp_dpcd_readb(&dp->aux, DP_PSR_STATUS, &status);
if (val < 0) {
dev_err(dp->dev, "PSR_STATUS read failed ret=%zd", val);
return val;
}
return status;
}
int analogix_dp_send_psr_spd(struct analogix_dp_device *dp,
struct edp_vsc_psr *vsc)
{
unsigned int val;
int ret;
ssize_t psr_status;
/* don't send info frame */
val = readl(dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
......@@ -1036,6 +1052,17 @@ void analogix_dp_send_psr_spd(struct analogix_dp_device *dp,
val = readl(dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
val |= IF_EN;
writel(val, dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
ret = readx_poll_timeout(analogix_dp_get_psr_status, dp, psr_status,
psr_status >= 0 &&
((vsc->DB1 && psr_status == DP_PSR_SINK_ACTIVE_RFB) ||
(!vsc->DB1 && psr_status == DP_PSR_SINK_INACTIVE)), 1500,
DP_TIMEOUT_PSR_LOOP_MS * 1000);
if (ret) {
dev_warn(dp->dev, "Failed to apply PSR %d\n", ret);
return ret;
}
return 0;
}
ssize_t analogix_dp_transfer(struct analogix_dp_device *dp,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment