ahci: Get rid of pci_dev argument in ahci_save_initial_config()

To make the function generic we have to get rid of "struct pci_dev *",
so let's pass just a "struct devce *".
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

drivers/ata/ahci.c

@@ -840,7 +840,7 @@ static ssize_t ahci_show_port_cmd(struct device *dev,
 
 /**
  *	ahci_save_initial_config - Save and fixup initial config values
- *	@pdev: target PCI device
+ *	@dev: target AHCI device
  *	@hpriv: host private area to store config values
  *	@force_port_map: force port map to a specified value
  *	@mask_port_map: mask out particular bits from port map
@@ -855,7 +855,7 @@ static ssize_t ahci_show_port_cmd(struct device *dev,
  *	LOCKING:
  *	None.
  */
-static void ahci_save_initial_config(struct pci_dev *pdev,
+static void ahci_save_initial_config(struct device *dev,
 				     struct ahci_host_priv *hpriv,
 				     unsigned int force_port_map,
 				     unsigned int mask_port_map)
@@ -883,45 +883,43 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
 
 	/* some chips have errata preventing 64bit use */
 	if ((cap & HOST_CAP_64) && (hpriv->flags & AHCI_HFLAG_32BIT_ONLY)) {
-		dev_printk(KERN_INFO, &pdev->dev,
+		dev_printk(KERN_INFO, dev,
 			   "controller can't do 64bit DMA, forcing 32bit\n");
 		cap &= ~HOST_CAP_64;
 	}
 
 	if ((cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_NO_NCQ)) {
-		dev_printk(KERN_INFO, &pdev->dev,
+		dev_printk(KERN_INFO, dev,
 			   "controller can't do NCQ, turning off CAP_NCQ\n");
 		cap &= ~HOST_CAP_NCQ;
 	}
 
 	if (!(cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_YES_NCQ)) {
-		dev_printk(KERN_INFO, &pdev->dev,
+		dev_printk(KERN_INFO, dev,
 			   "controller can do NCQ, turning on CAP_NCQ\n");
 		cap |= HOST_CAP_NCQ;
 	}
 
 	if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) {
-		dev_printk(KERN_INFO, &pdev->dev,
+		dev_printk(KERN_INFO, dev,
 			   "controller can't do PMP, turning off CAP_PMP\n");
 		cap &= ~HOST_CAP_PMP;
 	}
 
 	if ((cap & HOST_CAP_SNTF) && (hpriv->flags & AHCI_HFLAG_NO_SNTF)) {
-		dev_printk(KERN_INFO, &pdev->dev,
+		dev_printk(KERN_INFO, dev,
 			   "controller can't do SNTF, turning off CAP_SNTF\n");
 		cap &= ~HOST_CAP_SNTF;
 	}
 
 	if (force_port_map && port_map != force_port_map) {
-		dev_printk(KERN_INFO, &pdev->dev,
-			   "forcing port_map 0x%x -> 0x%x\n",
+		dev_printk(KERN_INFO, dev, "forcing port_map 0x%x -> 0x%x\n",
 			   port_map, force_port_map);
 		port_map = force_port_map;
 	}
 
 	if (mask_port_map) {
-		dev_printk(KERN_ERR, &pdev->dev,
-			   "masking port_map 0x%x -> 0x%x\n",
+		dev_printk(KERN_ERR, dev, "masking port_map 0x%x -> 0x%x\n",
 			   port_map,
 			   port_map & mask_port_map);
 		port_map &= mask_port_map;
@@ -939,7 +937,7 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
 		 * port_map and let it be generated from n_ports.
 		 */
 		if (map_ports > ahci_nr_ports(cap)) {
-			dev_printk(KERN_WARNING, &pdev->dev,
+			dev_printk(KERN_WARNING, dev,
 				   "implemented port map (0x%x) contains more "
 				   "ports than nr_ports (%u), using nr_ports\n",
 				   port_map, ahci_nr_ports(cap));
@@ -950,7 +948,7 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
 	/* fabricate port_map from cap.nr_ports */
 	if (!port_map) {
 		port_map = (1 << ahci_nr_ports(cap)) - 1;
-		dev_printk(KERN_WARNING, &pdev->dev,
+		dev_printk(KERN_WARNING, dev,
 			   "forcing PORTS_IMPL to 0x%x\n", port_map);
 
 		/* write the fixed up value to the PI register */
@@ -988,7 +986,8 @@ static void ahci_pci_save_initial_config(struct pci_dev *pdev,
 			  "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n");
 	}
 
-	ahci_save_initial_config(pdev, hpriv, force_port_map, mask_port_map);
+	ahci_save_initial_config(&pdev->dev, hpriv, force_port_map,
+				 mask_port_map);
 }
 
 /**