ARM: dts: BCM5301X: Relicense Christian's code to the GPL 2.0+ / MIT

Move code added by Christian to the bcm-ns.dtsi which uses dual
licensing. That syncs more Northstar code to be based on the same
licensing schema.

Cc: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Link: https://lore.kernel.org/r/20230605061049.16136-1-zajec5@gmail.comSigned-off-by: Florian Fainelli <florian.fainelli@broadcom.com>

arch/arm/boot/dts/bcm-ns.dtsi

@@ -182,6 +182,10 @@ pcie1: pcie@13000 {
 			reg = <0x00013000 0x1000>;
 		};
 
+		pcie2: pcie@14000 {
+			reg = <0x00014000 0x1000>;
+		};
+
 		usb2: usb2@21000 {
 			reg = <0x00021000 0x1000>;
 
@@ -274,6 +278,14 @@ gmac3: ethernet@27000 {
 		};
 	};
 
+	pwm: pwm@18002000 {
+		compatible = "brcm,iproc-pwm";
+		reg = <0x18002000 0x28>;
+		clocks = <&osc>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
 	mdio: mdio@18003000 {
 		compatible = "brcm,iproc-mdio";
 		reg = <0x18003000 0x8>;
@@ -299,6 +311,15 @@ ports {
 		};
 	};
 
+	uart2: serial@18008000 {
+		compatible = "ns16550a";
+		reg = <0x18008000 0x20>;
+		clocks = <&iprocslow>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
 	dmu-bus@1800c000 {
 		compatible = "simple-bus";
 		ranges = <0 0x1800c000 0x1000>;

arch/arm/boot/dts/bcm5301x.dtsi

@@ -69,20 +69,6 @@ periph_clk: periph_clk {
 		};
 	};
 
-	axi@18000000 {
-		pcie2: pcie@14000 {
-			reg = <0x00014000 0x1000>;
-		};
-	};
-
-	pwm: pwm@18002000 {
-		compatible = "brcm,iproc-pwm";
-		reg = <0x18002000 0x28>;
-		clocks = <&osc>;
-		#pwm-cells = <3>;
-		status = "disabled";
-	};
-
 	mdio-mux@18003000 {
 		compatible = "mdio-mux-mmioreg", "mdio-mux";
 		mdio-parent-bus = <&mdio>;
@@ -110,15 +96,6 @@ usb3_dmp: syscon@18105000 {
 		reg = <0x18105000 0x1000>;
 	};
 
-	uart2: serial@18008000 {
-		compatible = "ns16550a";
-		reg = <0x18008000 0x20>;
-		clocks = <&iprocslow>;
-		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		status = "disabled";
-	};
-
 	i2c0: i2c@18009000 {
 		compatible = "brcm,iproc-i2c";
 		reg = <0x18009000 0x50>;