wl18xx: add new phy configuration parameters for telec support

Add back-off settings to the wl18xx_mac_and_phy_params.  We had an
empty space where the new parameters are added, so this change doesn't
affect backwards-compatibility with older firmwares.

Update WL18XX_CONF_VERSION accordingly.
Signed-off-by: Victor Goldenshtein <victorg@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>

drivers/net/wireless/ti/wl18xx/conf.h

@@ -23,7 +23,7 @@
 #define __WL18XX_CONF_H__
 
 #define WL18XX_CONF_MAGIC	0x10e100ca
-#define WL18XX_CONF_VERSION	(WLCORE_CONF_VERSION | 0x0005)
+#define WL18XX_CONF_VERSION	(WLCORE_CONF_VERSION | 0x0006)
 #define WL18XX_CONF_MASK	0x0000ffff
 #define WL18XX_CONF_SIZE	(WLCORE_CONF_SIZE + \
 				 sizeof(struct wl18xx_priv_conf))
@@ -70,8 +70,9 @@ struct wl18xx_mac_and_phy_params {
 	u8 pwr_limit_reference_11_abg;
 	u8 per_chan_pwr_limit_arr_11p[NUM_OF_CHANNELS_11_P];
 	u8 pwr_limit_reference_11p;
-	u8 spare1[9];
-	u8 spare2[9];
+	u8 spare1;
+	u8 per_chan_bo_mode_11_abg[13];
+	u8 per_chan_bo_mode_11_p[4];
 	u8 primary_clock_setting_time;
 	u8 clock_valid_on_wake_up;
 	u8 secondary_clock_setting_time;

drivers/net/wireless/ti/wl18xx/main.c

@@ -547,6 +547,11 @@ static struct wl18xx_priv_conf wl18xx_default_priv_conf = {
 			0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 			0xff, 0xff, 0xff, 0xff, 0xff, 0xff },
 		.pwr_limit_reference_11p	= 0x64,
+		.per_chan_bo_mode_11_abg	= { 0x00, 0x00, 0x00, 0x00,
+						    0x00, 0x00, 0x00, 0x00,
+						    0x00, 0x00, 0x00, 0x00,
+						    0x00 },
+		.per_chan_bo_mode_11_p		= { 0x00, 0x00, 0x00, 0x00 },
 		.per_chan_pwr_limit_arr_11p	= { 0xff, 0xff, 0xff, 0xff,
 						    0xff, 0xff, 0xff },
 		.psat				= 0,