Commit 1dfbec39 authored by Xing Zheng's avatar Xing Zheng Committed by Heiko Stuebner

clk: rockchip: optimize 800MHz and 1GHz pll rates on RK3399

Usually, the 800MHz and 1GHz are supplied for CPLL and NPLL in the RK3399.
But dues to the carelessly copying from RK3036 when the RK3399 bringing up,
the refdiv == 6, it will increase the lock time, and it is not an optimal
configuration.

Let's fix them for the lock time and jitter are lower:
800 MHz:
- FVCO == 2.4 GHz, revdiv == 1.
1 GHz:
- FVCO == 3 GHz, revdiv == 1.
Signed-off-by: default avatarXing Zheng <zhengxing@rock-chips.com>
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
parent 46dd212a
...@@ -77,7 +77,7 @@ static struct rockchip_pll_rate_table rk3399_pll_rates[] = { ...@@ -77,7 +77,7 @@ static struct rockchip_pll_rate_table rk3399_pll_rates[] = {
RK3036_PLL_RATE(1104000000, 1, 46, 1, 1, 1, 0), RK3036_PLL_RATE(1104000000, 1, 46, 1, 1, 1, 0),
RK3036_PLL_RATE(1100000000, 12, 550, 1, 1, 1, 0), RK3036_PLL_RATE(1100000000, 12, 550, 1, 1, 1, 0),
RK3036_PLL_RATE(1008000000, 1, 84, 2, 1, 1, 0), RK3036_PLL_RATE(1008000000, 1, 84, 2, 1, 1, 0),
RK3036_PLL_RATE(1000000000, 6, 500, 2, 1, 1, 0), RK3036_PLL_RATE(1000000000, 1, 125, 3, 1, 1, 0),
RK3036_PLL_RATE( 984000000, 1, 82, 2, 1, 1, 0), RK3036_PLL_RATE( 984000000, 1, 82, 2, 1, 1, 0),
RK3036_PLL_RATE( 960000000, 1, 80, 2, 1, 1, 0), RK3036_PLL_RATE( 960000000, 1, 80, 2, 1, 1, 0),
RK3036_PLL_RATE( 936000000, 1, 78, 2, 1, 1, 0), RK3036_PLL_RATE( 936000000, 1, 78, 2, 1, 1, 0),
...@@ -87,7 +87,7 @@ static struct rockchip_pll_rate_table rk3399_pll_rates[] = { ...@@ -87,7 +87,7 @@ static struct rockchip_pll_rate_table rk3399_pll_rates[] = {
RK3036_PLL_RATE( 864000000, 1, 72, 2, 1, 1, 0), RK3036_PLL_RATE( 864000000, 1, 72, 2, 1, 1, 0),
RK3036_PLL_RATE( 840000000, 1, 70, 2, 1, 1, 0), RK3036_PLL_RATE( 840000000, 1, 70, 2, 1, 1, 0),
RK3036_PLL_RATE( 816000000, 1, 68, 2, 1, 1, 0), RK3036_PLL_RATE( 816000000, 1, 68, 2, 1, 1, 0),
RK3036_PLL_RATE( 800000000, 6, 400, 2, 1, 1, 0), RK3036_PLL_RATE( 800000000, 1, 100, 3, 1, 1, 0),
RK3036_PLL_RATE( 700000000, 6, 350, 2, 1, 1, 0), RK3036_PLL_RATE( 700000000, 6, 350, 2, 1, 1, 0),
RK3036_PLL_RATE( 696000000, 1, 58, 2, 1, 1, 0), RK3036_PLL_RATE( 696000000, 1, 58, 2, 1, 1, 0),
RK3036_PLL_RATE( 676000000, 3, 169, 2, 1, 1, 0), RK3036_PLL_RATE( 676000000, 3, 169, 2, 1, 1, 0),
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment