Commit 1e27b9e4 authored by Ido Schimmel's avatar Ido Schimmel Committed by David S. Miller

mlxsw: core: Add support for module EEPROM read by page

Add support for ethtool_ops::get_module_eeprom_by_page() which allows
user space to read transceiver module EEPROM based on passed parameters.

The I2C address is not validated in order to avoid module-specific code.
In case of wrong address, error will be returned from device's firmware.

Tested by comparing output with legacy method (ioctl) output.
Signed-off-by: default avatarIdo Schimmel <idosch@nvidia.com>
Tested-by: default avatarVadim Pasternak <vadimp@nvidia.com>
Reviewed-by: default avatarJiri Pirko <jiri@nvidia.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent cecefb3a
......@@ -3,6 +3,7 @@
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/ethtool.h>
#include <linux/sfp.h>
#include "core.h"
......@@ -315,6 +316,79 @@ int mlxsw_env_get_module_eeprom(struct net_device *netdev,
}
EXPORT_SYMBOL(mlxsw_env_get_module_eeprom);
static int mlxsw_env_mcia_status_process(const char *mcia_pl,
struct netlink_ext_ack *extack)
{
u8 status = mlxsw_reg_mcia_status_get(mcia_pl);
switch (status) {
case MLXSW_REG_MCIA_STATUS_GOOD:
return 0;
case MLXSW_REG_MCIA_STATUS_NO_EEPROM_MODULE:
NL_SET_ERR_MSG_MOD(extack, "No response from module's EEPROM");
return -EIO;
case MLXSW_REG_MCIA_STATUS_MODULE_NOT_SUPPORTED:
NL_SET_ERR_MSG_MOD(extack, "Module type not supported by the device");
return -EOPNOTSUPP;
case MLXSW_REG_MCIA_STATUS_MODULE_NOT_CONNECTED:
NL_SET_ERR_MSG_MOD(extack, "No module present indication");
return -EIO;
case MLXSW_REG_MCIA_STATUS_I2C_ERROR:
NL_SET_ERR_MSG_MOD(extack, "Error occurred while trying to access module's EEPROM using I2C");
return -EIO;
case MLXSW_REG_MCIA_STATUS_MODULE_DISABLED:
NL_SET_ERR_MSG_MOD(extack, "Module is disabled");
return -EIO;
default:
NL_SET_ERR_MSG_MOD(extack, "Unknown error");
return -EIO;
}
}
int
mlxsw_env_get_module_eeprom_by_page(struct mlxsw_core *mlxsw_core, u8 module,
const struct ethtool_module_eeprom *page,
struct netlink_ext_ack *extack)
{
u32 bytes_read = 0;
u16 device_addr;
/* Offset cannot be larger than 2 * ETH_MODULE_EEPROM_PAGE_LEN */
device_addr = page->offset;
while (bytes_read < page->length) {
char eeprom_tmp[MLXSW_REG_MCIA_EEPROM_SIZE];
char mcia_pl[MLXSW_REG_MCIA_LEN];
u8 size;
int err;
size = min_t(u8, page->length - bytes_read,
MLXSW_REG_MCIA_EEPROM_SIZE);
mlxsw_reg_mcia_pack(mcia_pl, module, 0, page->page,
device_addr + bytes_read, size,
page->i2c_address);
mlxsw_reg_mcia_bank_number_set(mcia_pl, page->bank);
err = mlxsw_reg_query(mlxsw_core, MLXSW_REG(mcia), mcia_pl);
if (err) {
NL_SET_ERR_MSG_MOD(extack, "Failed to access module's EEPROM");
return err;
}
err = mlxsw_env_mcia_status_process(mcia_pl, extack);
if (err)
return err;
mlxsw_reg_mcia_eeprom_memcpy_from(mcia_pl, eeprom_tmp);
memcpy(page->data + bytes_read, eeprom_tmp, size);
bytes_read += size;
}
return bytes_read;
}
EXPORT_SYMBOL(mlxsw_env_get_module_eeprom_by_page);
static int mlxsw_env_module_has_temp_sensor(struct mlxsw_core *mlxsw_core,
u8 module,
bool *p_has_temp_sensor)
......
......@@ -4,6 +4,8 @@
#ifndef _MLXSW_CORE_ENV_H
#define _MLXSW_CORE_ENV_H
#include <linux/ethtool.h>
struct ethtool_modinfo;
struct ethtool_eeprom;
......@@ -17,6 +19,11 @@ int mlxsw_env_get_module_eeprom(struct net_device *netdev,
struct mlxsw_core *mlxsw_core, int module,
struct ethtool_eeprom *ee, u8 *data);
int
mlxsw_env_get_module_eeprom_by_page(struct mlxsw_core *mlxsw_core, u8 module,
const struct ethtool_module_eeprom *page,
struct netlink_ext_ack *extack);
int
mlxsw_env_module_overheat_counter_get(struct mlxsw_core *mlxsw_core, u8 module,
u64 *p_counter);
......
......@@ -112,10 +112,23 @@ mlxsw_m_get_module_eeprom(struct net_device *netdev, struct ethtool_eeprom *ee,
ee, data);
}
static int
mlxsw_m_get_module_eeprom_by_page(struct net_device *netdev,
const struct ethtool_module_eeprom *page,
struct netlink_ext_ack *extack)
{
struct mlxsw_m_port *mlxsw_m_port = netdev_priv(netdev);
struct mlxsw_core *core = mlxsw_m_port->mlxsw_m->core;
return mlxsw_env_get_module_eeprom_by_page(core, mlxsw_m_port->module,
page, extack);
}
static const struct ethtool_ops mlxsw_m_port_ethtool_ops = {
.get_drvinfo = mlxsw_m_module_get_drvinfo,
.get_module_info = mlxsw_m_get_module_info,
.get_module_eeprom = mlxsw_m_get_module_eeprom,
.get_module_eeprom_by_page = mlxsw_m_get_module_eeprom_by_page,
};
static int
......
......@@ -1050,6 +1050,19 @@ static int mlxsw_sp_get_module_eeprom(struct net_device *netdev,
return err;
}
static int
mlxsw_sp_get_module_eeprom_by_page(struct net_device *dev,
const struct ethtool_module_eeprom *page,
struct netlink_ext_ack *extack)
{
struct mlxsw_sp_port *mlxsw_sp_port = netdev_priv(dev);
struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp;
u8 module = mlxsw_sp_port->mapping.module;
return mlxsw_env_get_module_eeprom_by_page(mlxsw_sp->core, module, page,
extack);
}
static int
mlxsw_sp_get_ts_info(struct net_device *netdev, struct ethtool_ts_info *info)
{
......@@ -1199,6 +1212,7 @@ const struct ethtool_ops mlxsw_sp_port_ethtool_ops = {
.set_link_ksettings = mlxsw_sp_port_set_link_ksettings,
.get_module_info = mlxsw_sp_get_module_info,
.get_module_eeprom = mlxsw_sp_get_module_eeprom,
.get_module_eeprom_by_page = mlxsw_sp_get_module_eeprom_by_page,
.get_ts_info = mlxsw_sp_get_ts_info,
.get_eth_phy_stats = mlxsw_sp_get_eth_phy_stats,
.get_eth_mac_stats = mlxsw_sp_get_eth_mac_stats,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment