Commit 1e2ac982 authored by Stefan Wahren's avatar Stefan Wahren Committed by Eduardo Valentin

dt-bindings: Add thermal zone to bcm2835-thermal example

Add a thermal zone in order to make the example complete.
Signed-off-by: default avatarStefan Wahren <stefan.wahren@i2se.com>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarEduardo Valentin <edubezval@gmail.com>
parent 75f78d6d
...@@ -3,15 +3,39 @@ Binding for Thermal Sensor driver for BCM2835 SoCs. ...@@ -3,15 +3,39 @@ Binding for Thermal Sensor driver for BCM2835 SoCs.
Required parameters: Required parameters:
------------------- -------------------
compatible: should be one of: "brcm,bcm2835-thermal", compatible: should be one of: "brcm,bcm2835-thermal",
"brcm,bcm2836-thermal" or "brcm,bcm2837-thermal" "brcm,bcm2836-thermal" or "brcm,bcm2837-thermal"
reg: Address range of the thermal registers. reg: Address range of the thermal registers.
clocks: Phandle of the clock used by the thermal sensor. clocks: Phandle of the clock used by the thermal sensor.
#thermal-sensor-cells: should be 0 (see thermal.txt)
Example: Example:
thermal-zones {
cpu_thermal: cpu-thermal {
polling-delay-passive = <0>;
polling-delay = <1000>;
thermal-sensors = <&thermal>;
trips {
cpu-crit {
temperature = <80000>;
hysteresis = <0>;
type = "critical";
};
};
coefficients = <(-538) 407000>;
cooling-maps {
};
};
};
thermal: thermal@7e212000 { thermal: thermal@7e212000 {
compatible = "brcm,bcm2835-thermal"; compatible = "brcm,bcm2835-thermal";
reg = <0x7e212000 0x8>; reg = <0x7e212000 0x8>;
clocks = <&clocks BCM2835_CLOCK_TSENS>; clocks = <&clocks BCM2835_CLOCK_TSENS>;
#thermal-sensor-cells = <0>;
}; };
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment