Merge branch 'selftests-udpgro-fixes'

Hangbin Liu says:

====================
selftests: Fix udpgro failures

There are 2 issues for the current udpgro test. The first one is the testing
doesn't record all the failures, which may report pass but the test actually
failed. e.g.
https://netdev-3.bots.linux.dev/vmksft-net/results/725661/45-udpgro-sh/stdout

The other one is after commit d7db7775 ("net: veth: do not manipulate
GRO when using XDP"), there is no need to load xdp program to enable GRO
on veth device.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

tools/testing/selftests/net/udpgro.sh

@@ -7,8 +7,6 @@ source net_helper.sh
 
 readonly PEER_NS="ns-peer-$(mktemp -u XXXXXX)"
 
-BPF_FILE="xdp_dummy.bpf.o"
-
 # set global exit status, but never reset nonzero one.
 check_err()
 {
@@ -38,7 +36,7 @@ cfg_veth() {
 	ip -netns "${PEER_NS}" addr add dev veth1 192.168.1.1/24
 	ip -netns "${PEER_NS}" addr add dev veth1 2001:db8::1/64 nodad
 	ip -netns "${PEER_NS}" link set dev veth1 up
-	ip -n "${PEER_NS}" link set veth1 xdp object ${BPF_FILE} section xdp
+	ip netns exec "${PEER_NS}" ethtool -K veth1 gro on
 }
 
 run_one() {
@@ -46,17 +44,19 @@ run_one() {
 	local -r all="$@"
 	local -r tx_args=${all%rx*}
 	local -r rx_args=${all#*rx}
+	local ret=0
 
 	cfg_veth
 
-	ip netns exec "${PEER_NS}" ./udpgso_bench_rx -C 1000 -R 10 ${rx_args} && \
-		echo "ok" || \
-		echo "failed" &
+	ip netns exec "${PEER_NS}" ./udpgso_bench_rx -C 1000 -R 10 ${rx_args} &
+	local PID1=$!
 
 	wait_local_port_listen ${PEER_NS} 8000 udp
 	./udpgso_bench_tx ${tx_args}
-	ret=$?
-	wait $(jobs -p)
+	check_err $?
+	wait ${PID1}
+	check_err $?
+	[ "$ret" -eq 0 ] && echo "ok" || echo "failed"
 	return $ret
 }
 
@@ -73,6 +73,7 @@ run_one_nat() {
 	local -r all="$@"
 	local -r tx_args=${all%rx*}
 	local -r rx_args=${all#*rx}
+	local ret=0
 
 	if [[ ${tx_args} = *-4* ]]; then
 		ipt_cmd=iptables
@@ -93,16 +94,17 @@ run_one_nat() {
 	# ... so that GRO will match the UDP_GRO enabled socket, but packets
 	# will land on the 'plain' one
 	ip netns exec "${PEER_NS}" ./udpgso_bench_rx -G ${family} -b ${addr1} -n 0 &
-	pid=$!
-	ip netns exec "${PEER_NS}" ./udpgso_bench_rx -C 1000 -R 10 ${family} -b ${addr2%/*} ${rx_args} && \
-		echo "ok" || \
-		echo "failed"&
+	local PID1=$!
+	ip netns exec "${PEER_NS}" ./udpgso_bench_rx -C 1000 -R 10 ${family} -b ${addr2%/*} ${rx_args} &
+	local PID2=$!
 
 	wait_local_port_listen "${PEER_NS}" 8000 udp
 	./udpgso_bench_tx ${tx_args}
-	ret=$?
-	kill -INT $pid
-	wait $(jobs -p)
+	check_err $?
+	kill -INT ${PID1}
+	wait ${PID2}
+	check_err $?
+	[ "$ret" -eq 0 ] && echo "ok" || echo "failed"
 	return $ret
 }
 
@@ -111,20 +113,26 @@ run_one_2sock() {
 	local -r all="$@"
 	local -r tx_args=${all%rx*}
 	local -r rx_args=${all#*rx}
+	local ret=0
 
 	cfg_veth
 
 	ip netns exec "${PEER_NS}" ./udpgso_bench_rx -C 1000 -R 10 ${rx_args} -p 12345 &
-	ip netns exec "${PEER_NS}" ./udpgso_bench_rx -C 2000 -R 10 ${rx_args} && \
-		echo "ok" || \
-		echo "failed" &
+	local PID1=$!
+	ip netns exec "${PEER_NS}" ./udpgso_bench_rx -C 2000 -R 10 ${rx_args} &
+	local PID2=$!
 
 	wait_local_port_listen "${PEER_NS}" 12345 udp
 	./udpgso_bench_tx ${tx_args} -p 12345
+	check_err $?
 	wait_local_port_listen "${PEER_NS}" 8000 udp
 	./udpgso_bench_tx ${tx_args}
-	ret=$?
-	wait $(jobs -p)
+	check_err $?
+	wait ${PID1}
+	check_err $?
+	wait ${PID2}
+	check_err $?
+	[ "$ret" -eq 0 ] && echo "ok" || echo "failed"
 	return $ret
 }
 
@@ -196,11 +204,6 @@ run_all() {
 	return $ret
 }
 
-if [ ! -f ${BPF_FILE} ]; then
-	echo "Missing ${BPF_FILE}. Run 'make' first"
-	exit -1
-fi
-
 if [[ $# -eq 0 ]]; then
 	run_all
 elif [[ $1 == "__subprocess" ]]; then