Commit 1e821dd2 authored by Clemens Ladisch's avatar Clemens Ladisch Committed by Jaroslav Kysela

[ALSA] oxygen: use AC97 interrupt

After an AC97 register read or write, use the AC97 interrupt instead of
polling to wait for the access to be completed.
Signed-off-by: default avatarClemens Ladisch <clemens@ladisch.de>
Signed-off-by: default avatarJaroslav Kysela <perex@perex.cz>
parent 911b499a
......@@ -3,6 +3,7 @@
#include <linux/mutex.h>
#include <linux/spinlock.h>
#include <linux/wait.h>
#include <linux/workqueue.h>
#include "oxygen_regs.h"
......@@ -65,6 +66,7 @@ struct oxygen {
struct snd_pcm_substream *streams[PCM_COUNT];
struct snd_kcontrol *controls[CONTROL_COUNT];
struct work_struct spdif_input_bits_work;
wait_queue_head_t ac97_waitqueue;
};
struct oxygen_model {
......
......@@ -85,14 +85,22 @@ EXPORT_SYMBOL(oxygen_write32_masked);
static int oxygen_ac97_wait(struct oxygen *chip, unsigned int mask)
{
unsigned long timeout = jiffies + msecs_to_jiffies(1);
do {
udelay(5);
cond_resched();
if (oxygen_read8(chip, OXYGEN_AC97_INTERRUPT_STATUS) & mask)
return 0;
} while (time_after_eq(timeout, jiffies));
return -EIO;
u8 status = 0;
/*
* Reading the status register also clears the bits, so we have to save
* the read bits in status.
*/
wait_event_timeout(chip->ac97_waitqueue,
({ status |= oxygen_read8(chip, OXYGEN_AC97_INTERRUPT_STATUS);
status & mask; }),
msecs_to_jiffies(1) + 1);
/*
* Check even after a timeout because this function should not require
* the AC'97 interrupt to be enabled.
*/
status |= oxygen_read8(chip, OXYGEN_AC97_INTERRUPT_STATUS);
return status & mask ? 0 : -EIO;
}
/*
......
......@@ -53,7 +53,8 @@ static irqreturn_t oxygen_interrupt(int dummy, void *dev_id)
OXYGEN_CHANNEL_MULTICH |
OXYGEN_CHANNEL_AC97 |
OXYGEN_INT_SPDIF_IN_DETECT |
OXYGEN_INT_GPIO);
OXYGEN_INT_GPIO |
OXYGEN_INT_AC97);
if (clear) {
if (clear & OXYGEN_INT_SPDIF_IN_DETECT)
chip->interrupt_mask &= ~OXYGEN_INT_SPDIF_IN_DETECT;
......@@ -89,6 +90,9 @@ static irqreturn_t oxygen_interrupt(int dummy, void *dev_id)
if ((status & OXYGEN_INT_MIDI) && chip->midi)
snd_mpu401_uart_interrupt(0, chip->midi->private_data);
if (status & OXYGEN_INT_AC97)
wake_up(&chip->ac97_waitqueue);
return IRQ_HANDLED;
}
......@@ -306,7 +310,9 @@ static void __devinit oxygen_init(struct oxygen *chip)
(2 << OXYGEN_A_MONITOR_ROUTE_2_SHIFT) |
(3 << OXYGEN_A_MONITOR_ROUTE_3_SHIFT));
oxygen_write8(chip, OXYGEN_AC97_INTERRUPT_MASK, 0);
oxygen_write8(chip, OXYGEN_AC97_INTERRUPT_MASK,
OXYGEN_AC97_INT_READ_DONE |
OXYGEN_AC97_INT_WRITE_DONE);
oxygen_write32(chip, OXYGEN_AC97_OUT_CONFIG, 0);
oxygen_write32(chip, OXYGEN_AC97_IN_CONFIG, 0);
if (!(chip->has_ac97_0 | chip->has_ac97_1))
......@@ -408,6 +414,7 @@ int __devinit oxygen_pci_probe(struct pci_dev *pci, int index, char *id,
mutex_init(&chip->mutex);
INIT_WORK(&chip->spdif_input_bits_work,
oxygen_spdif_input_bits_changed);
init_waitqueue_head(&chip->ac97_waitqueue);
err = pci_enable_device(pci);
if (err < 0)
......@@ -471,7 +478,7 @@ int __devinit oxygen_pci_probe(struct pci_dev *pci, int index, char *id,
oxygen_proc_init(chip);
spin_lock_irq(&chip->reg_lock);
chip->interrupt_mask |= OXYGEN_INT_SPDIF_IN_DETECT;
chip->interrupt_mask |= OXYGEN_INT_SPDIF_IN_DETECT | OXYGEN_INT_AC97;
oxygen_write16(chip, OXYGEN_INTERRUPT_MASK, chip->interrupt_mask);
spin_unlock_irq(&chip->reg_lock);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment