Commit 1e8a52e1 authored by Grant Likely's avatar Grant Likely

spi: By default setup spi_masters with 1 chipselect and dynamics bus number

Trivial simplification.  Instead of requiring spi master drivers to
always set the bus number (even when a dynamic number is desired),
this patch modifies spi_alloc_master() to initialize num_chipselect to
1 (because there will always be at least one CS) and bus_num to -1 for
dynamic allocation.  This simplifies the code needed to be written for
drivers.
Signed-off-by: default avatarGrant Likely <grant.likely@secretlab.ca>
parent 71422f9e
......@@ -216,9 +216,6 @@ static __devinit int ath79_spi_probe(struct platform_device *pdev)
if (pdata) {
master->bus_num = pdata->bus_num;
master->num_chipselect = pdata->num_chipselect;
} else {
master->bus_num = -1;
master->num_chipselect = 1;
}
sp->bitbang.master = spi_master_get(master);
......
......@@ -219,9 +219,6 @@ static void spi_lm70llp_attach(struct parport *p)
}
pp = spi_master_get_devdata(master);
master->bus_num = -1; /* dynamic alloc of a bus number */
master->num_chipselect = 1;
/*
* SPI and bitbang hookup.
*/
......
......@@ -433,7 +433,6 @@ static int __devinit mpc52xx_spi_probe(struct platform_device *op)
goto err_alloc;
}
master->bus_num = -1;
master->setup = mpc52xx_spi_setup;
master->transfer = mpc52xx_spi_transfer;
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST;
......@@ -479,8 +478,6 @@ static int __devinit mpc52xx_spi_probe(struct platform_device *op)
gpio_direction_output(gpio_cs, 1);
ms->gpio_cs[i] = gpio_cs;
}
} else {
master->num_chipselect = 1;
}
spin_lock_init(&ms->lock);
......
......@@ -466,9 +466,6 @@ static int __init spi_ppc4xx_of_probe(struct platform_device *op)
bbp->master->setup = spi_ppc4xx_setup;
bbp->master->cleanup = spi_ppc4xx_cleanup;
/* Allocate bus num dynamically. */
bbp->master->bus_num = -1;
/* the spi->mode bits understood by this driver: */
bbp->master->mode_bits =
SPI_CPHA | SPI_CPOL | SPI_CS_HIGH | SPI_LSB_FIRST;
......
......@@ -1438,7 +1438,6 @@ static int __devinit pch_spi_pd_probe(struct platform_device *plat_dev)
plat_dev->id, data->io_remap_addr);
/* initialize members of SPI master */
master->bus_num = -1;
master->num_chipselect = PCH_MAX_CS;
master->setup = pch_spi_setup;
master->transfer = pch_spi_transfer;
......
......@@ -936,6 +936,8 @@ struct spi_master *spi_alloc_master(struct device *dev, unsigned size)
return NULL;
device_initialize(&master->dev);
master->bus_num = -1;
master->num_chipselect = 1;
master->dev.class = &spi_master_class;
master->dev.parent = get_device(dev);
spi_master_set_devdata(master, &master[1]);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment