Commit 1ed4565b authored by Akinobu Mita's avatar Akinobu Mita Committed by Greg Kroah-Hartman

iio: adc: ti-ads1015: avoid getting stale result after runtime resume

commit 73e3e3fc upstream.

This driver assumes that the device is operating in the continuous
conversion mode which performs the conversion continuously.  So this driver
doesn't insert a wait time before reading the conversion register if the
configuration is not changed from a previous request.

This assumption is broken if the device is runtime suspended and entered
a power-down state.  The forthcoming request causes reading a stale result
from the conversion register as the device is runtime resumed just before.

Fix it by adding a flag to detect that condition and insert a necessary
wait time.

Cc: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: default avatarAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent c72ad1a4
......@@ -176,6 +176,12 @@ struct ads1015_data {
struct ads1015_channel_data channel_data[ADS1015_CHANNELS];
unsigned int *data_rate;
/*
* Set to true when the ADC is switched to the continuous-conversion
* mode and exits from a power-down state. This flag is used to avoid
* getting the stale result from the conversion register.
*/
bool conv_invalid;
};
static bool ads1015_is_writeable_reg(struct device *dev, unsigned int reg)
......@@ -254,9 +260,10 @@ int ads1015_get_adc_result(struct ads1015_data *data, int chan, int *val)
if (ret < 0)
return ret;
if (change) {
if (change || data->conv_invalid) {
conv_time = DIV_ROUND_UP(USEC_PER_SEC, data->data_rate[dr]);
usleep_range(conv_time, conv_time + 1);
data->conv_invalid = false;
}
return regmap_read(data->regmap, ADS1015_CONV_REG, val);
......@@ -624,6 +631,8 @@ static int ads1015_probe(struct i2c_client *client,
if (ret)
return ret;
data->conv_invalid = true;
ret = pm_runtime_set_active(&client->dev);
if (ret)
goto err_buffer_cleanup;
......@@ -679,10 +688,15 @@ static int ads1015_runtime_resume(struct device *dev)
{
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
struct ads1015_data *data = iio_priv(indio_dev);
int ret;
return regmap_update_bits(data->regmap, ADS1015_CFG_REG,
ret = regmap_update_bits(data->regmap, ADS1015_CFG_REG,
ADS1015_CFG_MOD_MASK,
ADS1015_CONTINUOUS << ADS1015_CFG_MOD_SHIFT);
if (!ret)
data->conv_invalid = true;
return ret;
}
#endif
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment