Commit 1eec7151 authored by Christian Lamparter's avatar Christian Lamparter Committed by David S. Miller

net: dsa: qca8k: remove leftover phy accessors

This belated patch implements Andrew Lunn's request of
"remove the phy_read() and phy_write() functions."
<https://lore.kernel.org/patchwork/comment/902734/>

While seemingly harmless, this causes the switch's user
port PHYs to get registered twice. This is because the
DSA subsystem will create a slave mdio-bus not knowing
that the qca8k_phy_(read|write) accessors operate on
the external mdio-bus. So the same "bus" gets effectively
duplicated.

Cc: stable@vger.kernel.org
Fixes: 6b93fb46 ("net-next: dsa: add new driver for qca8xxx family")
Signed-off-by: default avatarChristian Lamparter <chunkeey@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 5e07321f
......@@ -624,22 +624,6 @@ qca8k_adjust_link(struct dsa_switch *ds, int port, struct phy_device *phy)
qca8k_port_set_status(priv, port, 1);
}
static int
qca8k_phy_read(struct dsa_switch *ds, int phy, int regnum)
{
struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
return mdiobus_read(priv->bus, phy, regnum);
}
static int
qca8k_phy_write(struct dsa_switch *ds, int phy, int regnum, u16 val)
{
struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
return mdiobus_write(priv->bus, phy, regnum, val);
}
static void
qca8k_get_strings(struct dsa_switch *ds, int port, u32 stringset, uint8_t *data)
{
......@@ -879,8 +863,6 @@ static const struct dsa_switch_ops qca8k_switch_ops = {
.setup = qca8k_setup,
.adjust_link = qca8k_adjust_link,
.get_strings = qca8k_get_strings,
.phy_read = qca8k_phy_read,
.phy_write = qca8k_phy_write,
.get_ethtool_stats = qca8k_get_ethtool_stats,
.get_sset_count = qca8k_get_sset_count,
.get_mac_eee = qca8k_get_mac_eee,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment