Commit 1f42c290 authored by Stephen Gallimore's avatar Stephen Gallimore Committed by Srinivas Kandagatla

drivers: reset: Reset controller driver for STiH415

This patch adds a reset controller platform driver for the STiH415
SoC. This initial version provides a compatible driver for the
"st,stih415-powerdown" device, which registers a system configuration
register based reset controller that controls the powerdown state of
hardware such as the on-chip USB host controllers.
Signed-off-by: default avatarStephen Gallimore <stephen.gallimore@st.com>
Signed-off-by: default avatarSrinivas Kandagatla <srinivas.kandagatla@st.com>
Acked-by: default avatarPhilipp Zabel <p.zabel@pengutronix.de>
parent e5d76075
......@@ -4,4 +4,8 @@ config STI_RESET_SYSCFG
bool
select RESET_CONTROLLER
config STIH415_RESET
bool
select STI_RESET_SYSCFG
endif
obj-$(CONFIG_STI_RESET_SYSCFG) += reset-syscfg.o
# SoC specific reset devices
obj-$(CONFIG_STIH415_RESET) += reset-stih415.o
/*
* Copyright (C) 2013 STMicroelectronics (R&D) Limited
* Author: Stephen Gallimore <stephen.gallimore@st.com>
* Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <dt-bindings/reset-controller/stih415-resets.h>
#include "reset-syscfg.h"
/*
* STiH415 Peripheral powerdown definitions.
*/
static const char stih415_front[] = "st,stih415-front-syscfg";
static const char stih415_rear[] = "st,stih415-rear-syscfg";
static const char stih415_sbc[] = "st,stih415-sbc-syscfg";
static const char stih415_lpm[] = "st,stih415-lpm-syscfg";
#define STIH415_PDN_FRONT(_bit) \
_SYSCFG_RST_CH(stih415_front, SYSCFG_114, _bit, SYSSTAT_187, _bit)
#define STIH415_PDN_REAR(_cntl, _stat) \
_SYSCFG_RST_CH(stih415_rear, SYSCFG_336, _cntl, SYSSTAT_384, _stat)
#define SYSCFG_114 0x38 /* Powerdown request EMI/NAND/Keyscan */
#define SYSSTAT_187 0x15c /* Powerdown status EMI/NAND/Keyscan */
#define SYSCFG_336 0x90 /* Powerdown request USB/SATA/PCIe */
#define SYSSTAT_384 0x150 /* Powerdown status USB/SATA/PCIe */
static const struct syscfg_reset_channel_data stih415_powerdowns[] = {
[STIH415_EMISS_POWERDOWN] = STIH415_PDN_FRONT(0),
[STIH415_NAND_POWERDOWN] = STIH415_PDN_FRONT(1),
[STIH415_KEYSCAN_POWERDOWN] = STIH415_PDN_FRONT(2),
[STIH415_USB0_POWERDOWN] = STIH415_PDN_REAR(0, 0),
[STIH415_USB1_POWERDOWN] = STIH415_PDN_REAR(1, 1),
[STIH415_USB2_POWERDOWN] = STIH415_PDN_REAR(2, 2),
[STIH415_SATA0_POWERDOWN] = STIH415_PDN_REAR(3, 3),
[STIH415_SATA1_POWERDOWN] = STIH415_PDN_REAR(4, 4),
[STIH415_PCIE_POWERDOWN] = STIH415_PDN_REAR(5, 8),
};
static struct syscfg_reset_controller_data stih415_powerdown_controller = {
.wait_for_ack = true,
.nr_channels = ARRAY_SIZE(stih415_powerdowns),
.channels = stih415_powerdowns,
};
static struct of_device_id stih415_reset_match[] = {
{ .compatible = "st,stih415-powerdown",
.data = &stih415_powerdown_controller, },
{},
};
static struct platform_driver stih415_reset_driver = {
.probe = syscfg_reset_probe,
.driver = {
.name = "reset-stih415",
.owner = THIS_MODULE,
.of_match_table = stih415_reset_match,
},
};
static int __init stih415_reset_init(void)
{
return platform_driver_register(&stih415_reset_driver);
}
arch_initcall(stih415_reset_init);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment