Commit 1f78867b authored by Michael Krufky's avatar Michael Krufky Committed by Mauro Carvalho Chehab

V4L/DVB (5231): Gl861: whitespace cleanups

Signed-off-by: default avatarMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@infradead.org>
parent e465ea7e
......@@ -17,7 +17,7 @@ module_param_named(debug,dvb_usb_gl861_debug, int, 0644);
MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS);
static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr,
u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
{
u16 index;
u16 value = addr << 8;
......@@ -33,25 +33,25 @@ static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr,
}
switch (wlen) {
case 1:
index = wbuf[0];
break;
case 2:
index = wbuf[0];
value = value + wbuf[1];
break;
default:
warn("wlen = %x, aborting.", wlen);
return -EINVAL;
case 1:
index = wbuf[0];
break;
case 2:
index = wbuf[0];
value = value + wbuf[1];
break;
default:
warn("wlen = %x, aborting.", wlen);
return -EINVAL;
}
return usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), req, type,
value, index, rbuf, rlen, 2000);
value, index, rbuf, rlen, 2000);
}
/* I2C */
static int gl861_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
int num)
int num)
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
int i;
......@@ -66,12 +66,12 @@ static int gl861_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
/* write/read request */
if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) {
if (gl861_i2c_msg(d, msg[i].addr, msg[i].buf,
msg[i].len, msg[i+1].buf, msg[i+1].len) < 0)
msg[i].len, msg[i+1].buf, msg[i+1].len) < 0)
break;
i++;
} else
if (gl861_i2c_msg(d, msg[i].addr, msg[i].buf,
msg[i].len, NULL, 0) < 0)
msg[i].len, NULL, 0) < 0)
break;
}
......@@ -108,7 +108,7 @@ static struct zl10353_config gl861_zl10353_config = {
static int gl861_frontend_attach(struct dvb_usb_adapter *adap)
{
if ((adap->fe = dvb_attach(zl10353_attach, &gl861_zl10353_config,
&adap->dev->i2c_adap)) != NULL) {
&adap->dev->i2c_adap)) != NULL) {
return 0;
}
......@@ -119,7 +119,7 @@ static int gl861_frontend_attach(struct dvb_usb_adapter *adap)
static struct dvb_usb_device_properties gl861_properties;
static int gl861_probe(struct usb_interface *intf,
const struct usb_device_id *id)
const struct usb_device_id *id)
{
struct dvb_usb_device *d;
struct usb_host_interface *alt;
......@@ -128,8 +128,7 @@ static int gl861_probe(struct usb_interface *intf,
if (intf->num_altsetting < 2)
return -ENODEV;
if ((ret = dvb_usb_device_init(intf, &gl861_properties, THIS_MODULE,
&d)) == 0) {
if ((ret = dvb_usb_device_init(intf, &gl861_properties, THIS_MODULE, &d)) == 0) {
alt = usb_altnum_to_altsetting(intf, 0);
if (alt == NULL) {
......@@ -138,7 +137,7 @@ static int gl861_probe(struct usb_interface *intf,
}
ret = usb_set_interface(d->udev, alt->desc.bInterfaceNumber,
alt->desc.bAlternateSetting);
alt->desc.bAlternateSetting);
}
return ret;
......@@ -146,7 +145,7 @@ static int gl861_probe(struct usb_interface *intf,
static struct usb_device_id gl861_table [] = {
{ USB_DEVICE(USB_VID_MSI, USB_PID_MSI_MEGASKY580_55801) },
{} /* Terminating entry */
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, gl861_table);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment