Commit 1f794483 authored by Anton Blanchard's avatar Anton Blanchard Committed by Roland Dreier

IB/ehca: Make output clearer by removing some debug messages

ehca spits out a lot of debugging information. I had to look closely to
see the "Port 1 is not active" message within all the debug:

eHCA Infiniband Device Driver (Rel.: SVNEHCA_0022)
eHCA scaling code enabled
ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_define_sqp Port 1 is not active.
ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_create_qp ehca_define_sqp() failed rc=ffffffffffffffff
ib_mad: Couldn't create ib_mad QP1
ib_mad: Couldn't open ehca0 port 1
ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_alloc_fmr unsupported fmr_attr->page_shift=9
ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_alloc_fmr rc=ffffffffffffffea pd=c000000b4b5b2420 mr_access_flags=7 fmr_attr=c0000005afd37394
fmr_create failed for FMR 0

Remove a few debug statements so that things are clearer:

eHCA Infiniband Device Driver (Rel.: SVNEHCA_0022)
eHCA scaling code enabled
ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_define_sqp Port 1 is not active.
ib_mad: Couldn't create ib_mad QP1
ib_mad: Couldn't open ehca0 port 1
ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_alloc_fmr unsupported fmr_attr->page_shift=9
fmr_create failed for FMR 0
Signed-off-by: default avatarAnton Blanchard <anton@samba.org>
Acked-by: default avatarHoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: default avatarRoland Dreier <rolandd@cisco.com>
parent d7dc3ccb
...@@ -846,10 +846,6 @@ struct ib_fmr *ehca_alloc_fmr(struct ib_pd *pd, ...@@ -846,10 +846,6 @@ struct ib_fmr *ehca_alloc_fmr(struct ib_pd *pd,
alloc_fmr_exit1: alloc_fmr_exit1:
ehca_mr_delete(e_fmr); ehca_mr_delete(e_fmr);
alloc_fmr_exit0: alloc_fmr_exit0:
if (IS_ERR(ib_fmr))
ehca_err(pd->device, "rc=%lx pd=%p mr_access_flags=%x "
"fmr_attr=%p", PTR_ERR(ib_fmr), pd,
mr_access_flags, fmr_attr);
return ib_fmr; return ib_fmr;
} /* end ehca_alloc_fmr() */ } /* end ehca_alloc_fmr() */
......
...@@ -714,8 +714,6 @@ static struct ehca_qp *internal_create_qp( ...@@ -714,8 +714,6 @@ static struct ehca_qp *internal_create_qp(
if (qp_type == IB_QPT_GSI) { if (qp_type == IB_QPT_GSI) {
h_ret = ehca_define_sqp(shca, my_qp, init_attr); h_ret = ehca_define_sqp(shca, my_qp, init_attr);
if (h_ret != H_SUCCESS) { if (h_ret != H_SUCCESS) {
ehca_err(pd->device, "ehca_define_sqp() failed rc=%lx",
h_ret);
ret = ehca2ib_return_code(h_ret); ret = ehca2ib_return_code(h_ret);
goto create_qp_exit4; goto create_qp_exit4;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment