Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "A handful of fixes for 3.11 are still trickling in.  These are:
   - A couple of fixes for older OMAP platforms
   - Another few fixes for at91 (lateish due to European summer
     vacations)
   - A late-found problem with USB on Tegra, fix is to keep VBUS
     regulator on at all times
   - One fix for Exynos 5440 dealing with CPU detection
   - One MAINTAINERS update"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: tegra: always enable USB VBUS regulators
  ARM: davinci: nand: specify ecc strength
  ARM: OMAP: rx51: change musb mode to OTG
  ARM: OMAP2: fix musb usage for n8x0
  MAINTAINERS: Update email address for Benoit Cousson
  ARM: at91/DT: fix at91sam9n12ek memory node
  ARM: at91: add missing uart clocks DT entries
  ARM: SAMSUNG: fix to support for missing cpu specific map_io
  ARM: at91/DT: at91sam9x5ek: fix USB host property to enable port C

MAINTAINERS

@@ -5884,7 +5884,7 @@ F:	drivers/i2c/busses/i2c-omap.c
 F:	include/linux/i2c-omap.h
 
 OMAP DEVICE TREE SUPPORT
-M:	Benoît Cousson <b-cousson@ti.com>
+M:	Benoît Cousson <bcousson@baylibre.com>
 M:	Tony Lindgren <tony@atomide.com>
 L:	linux-omap@vger.kernel.org
 L:	devicetree@vger.kernel.org
@@ -5964,14 +5964,14 @@ S:	Maintained
 F:	drivers/char/hw_random/omap-rng.c
 
 OMAP HWMOD SUPPORT
-M:	Benoît Cousson <b-cousson@ti.com>
+M:	Benoît Cousson <bcousson@baylibre.com>
 M:	Paul Walmsley <paul@pwsan.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	arch/arm/mach-omap2/omap_hwmod.*
 
 OMAP HWMOD DATA FOR OMAP4-BASED DEVICES
-M:	Benoît Cousson <b-cousson@ti.com>
+M:	Benoît Cousson <bcousson@baylibre.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	arch/arm/mach-omap2/omap_hwmod_44xx_data.c

arch/arm/boot/dts/at91sam9n12ek.dts

@@ -14,11 +14,11 @@ / {
 	compatible = "atmel,at91sam9n12ek", "atmel,at91sam9n12", "atmel,at91sam9";
 
 	chosen {
-		bootargs = "mem=128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";
+		bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";
 	};
 
 	memory {
-		reg = <0x20000000 0x10000000>;
+		reg = <0x20000000 0x8000000>;
 	};
 
 	clocks {

arch/arm/boot/dts/at91sam9x5ek.dtsi

@@ -94,8 +94,9 @@ watchdog@fffffe40 {
 
 		usb0: ohci@00600000 {
 			status = "okay";
-			num-ports = <2>;
-			atmel,vbus-gpio = <&pioD 19 GPIO_ACTIVE_LOW
+			num-ports = <3>;
+			atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
+					   &pioD 19 GPIO_ACTIVE_LOW
 					   &pioD 20 GPIO_ACTIVE_LOW
 					  >;
 		};

arch/arm/boot/dts/tegra20-seaboard.dts

@@ -830,6 +830,8 @@ vbus_reg: regulator@3 {
 			regulator-max-microvolt = <5000000>;
 			enable-active-high;
 			gpio = <&gpio 24 0>; /* PD0 */
+			regulator-always-on;
+			regulator-boot-on;
 		};
 	};
 

arch/arm/boot/dts/tegra20-trimslice.dts

@@ -412,6 +412,8 @@ vbus_reg: regulator@2 {
 			regulator-max-microvolt = <5000000>;
 			enable-active-high;
 			gpio = <&gpio 170 0>; /* PV2 */
+			regulator-always-on;
+			regulator-boot-on;
 		};
 	};
 

arch/arm/boot/dts/tegra20-whistler.dts

@@ -588,6 +588,8 @@ vbus1_reg: regulator@2 {
 			regulator-max-microvolt = <5000000>;
 			enable-active-high;
 			gpio = <&tca6416 0 0>; /* GPIO_PMU0 */
+			regulator-always-on;
+			regulator-boot-on;
 		};
 
 		vbus3_reg: regulator@3 {
@@ -598,6 +600,8 @@ vbus3_reg: regulator@3 {
 			regulator-max-microvolt = <5000000>;
 			enable-active-high;
 			gpio = <&tca6416 1 0>; /* GPIO_PMU1 */
+			regulator-always-on;
+			regulator-boot-on;
 		};
 	};
 

arch/arm/mach-at91/at91sam9x5.c

@@ -227,6 +227,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("usart", "f8020000.serial", &usart1_clk),
 	CLKDEV_CON_DEV_ID("usart", "f8024000.serial", &usart2_clk),
 	CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk),
+	CLKDEV_CON_DEV_ID("usart", "f8040000.serial", &uart0_clk),
+	CLKDEV_CON_DEV_ID("usart", "f8044000.serial", &uart1_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb0_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk),
 	CLKDEV_CON_DEV_ID("mci_clk", "f0008000.mmc", &mmc0_clk),

arch/arm/mach-davinci/board-dm355-leopard.c

@@ -75,6 +75,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
 	.parts			= davinci_nand_partitions,
 	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
 	.ecc_mode		= NAND_ECC_HW_SYNDROME,
+	.ecc_bits		= 4,
 	.bbt_options		= NAND_BBT_USE_FLASH,
 };
 

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -153,6 +153,7 @@ static struct davinci_nand_pdata davinci_evm_nandflash_data = {
 	.parts		= davinci_evm_nandflash_partition,
 	.nr_parts	= ARRAY_SIZE(davinci_evm_nandflash_partition),
 	.ecc_mode	= NAND_ECC_HW,
+	.ecc_bits	= 1,
 	.bbt_options	= NAND_BBT_USE_FLASH,
 	.timing		= &davinci_evm_nandflash_timing,
 };

arch/arm/mach-davinci/board-dm646x-evm.c

@@ -90,6 +90,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
 	.parts			= davinci_nand_partitions,
 	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
 	.ecc_mode		= NAND_ECC_HW,
+	.ecc_bits		= 1,
 	.options		= 0,
 };
 

arch/arm/mach-davinci/board-neuros-osd2.c

@@ -88,6 +88,7 @@ static struct davinci_nand_pdata davinci_ntosd2_nandflash_data = {
 	.parts		= davinci_ntosd2_nandflash_partition,
 	.nr_parts	= ARRAY_SIZE(davinci_ntosd2_nandflash_partition),
 	.ecc_mode	= NAND_ECC_HW,
+	.ecc_bits	= 1,
 	.bbt_options	= NAND_BBT_USE_FLASH,
 };
 

arch/arm/mach-omap2/board-n8x0.c

@@ -122,11 +122,7 @@ static struct musb_hdrc_config musb_config = {
 };
 
 static struct musb_hdrc_platform_data tusb_data = {
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
 	.mode		= MUSB_OTG,
-#else
-	.mode		= MUSB_HOST,
-#endif
 	.set_power	= tusb_set_power,
 	.min_power	= 25,	/* x2 = 50 mA drawn from VBUS as peripheral */
 	.power		= 100,	/* Max 100 mA VBUS for host mode */

arch/arm/mach-omap2/board-rx51.c

@@ -85,7 +85,7 @@ static struct omap_board_mux board_mux[] __initdata = {
 
 static struct omap_musb_board_data musb_board_data = {
 	.interface_type		= MUSB_INTERFACE_ULPI,
-	.mode			= MUSB_PERIPHERAL,
+	.mode			= MUSB_OTG,
 	.power			= 0,
 };
 

arch/arm/mach-omap2/usb-musb.c

@@ -38,11 +38,8 @@ static struct musb_hdrc_config musb_config = {
 };
 
 static struct musb_hdrc_platform_data musb_plat = {
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
 	.mode		= MUSB_OTG,
-#else
-	.mode		= MUSB_HOST,
-#endif
+
 	/* .clock is set dynamically */
 	.config		= &musb_config,
 

arch/arm/plat-samsung/init.c

@@ -55,12 +55,13 @@ void __init s3c_init_cpu(unsigned long idcode,
 
 	printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode);
 
-	if (cpu->map_io == NULL || cpu->init == NULL) {
+	if (cpu->init == NULL) {
 		printk(KERN_ERR "CPU %s support not enabled\n", cpu->name);
 		panic("Unsupported Samsung CPU");
 	}
 
-	cpu->map_io();
+	if (cpu->map_io)
+		cpu->map_io();
 }
 
 /* s3c24xx_init_clocks