usb: typec: ucsi: Add new notification bits

Newer UCSI versions defined additional notification bits that can be
enabled by the PPM. Add their definitions and convert all definitions
to BIT_ULL() as we now cross the 32-bit boundary.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/3filrg6mbh6m3galir7ew5juakd25uvksimr7mqd7uc5td3xza@fdvxcewozqehSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/typec/ucsi/ucsi.h

@@ -124,18 +124,23 @@ void ucsi_connector_change(struct ucsi *ucsi, u8 num);
 #define UCSI_ACK_COMMAND_COMPLETE		BIT(17)
 
 /* SET_NOTIFICATION_ENABLE command bits */
-#define UCSI_ENABLE_NTFY_CMD_COMPLETE		BIT(16)
-#define UCSI_ENABLE_NTFY_EXT_PWR_SRC_CHANGE	BIT(17)
-#define UCSI_ENABLE_NTFY_PWR_OPMODE_CHANGE	BIT(18)
-#define UCSI_ENABLE_NTFY_CAP_CHANGE		BIT(21)
-#define UCSI_ENABLE_NTFY_PWR_LEVEL_CHANGE	BIT(22)
-#define UCSI_ENABLE_NTFY_PD_RESET_COMPLETE	BIT(23)
-#define UCSI_ENABLE_NTFY_CAM_CHANGE		BIT(24)
-#define UCSI_ENABLE_NTFY_BAT_STATUS_CHANGE	BIT(25)
-#define UCSI_ENABLE_NTFY_PARTNER_CHANGE		BIT(27)
-#define UCSI_ENABLE_NTFY_PWR_DIR_CHANGE		BIT(28)
-#define UCSI_ENABLE_NTFY_CONNECTOR_CHANGE	BIT(30)
-#define UCSI_ENABLE_NTFY_ERROR			BIT(31)
+#define UCSI_ENABLE_NTFY_CMD_COMPLETE		BIT_ULL(16)
+#define UCSI_ENABLE_NTFY_EXT_PWR_SRC_CHANGE	BIT_ULL(17)
+#define UCSI_ENABLE_NTFY_PWR_OPMODE_CHANGE	BIT_ULL(18)
+#define UCSI_ENABLE_NTFY_ATTENTION		BIT_ULL(19)
+#define UCSI_ENABLE_NTFY_LPM_FW_UPDATE_REQ	BIT_ULL(20)
+#define UCSI_ENABLE_NTFY_CAP_CHANGE		BIT_ULL(21)
+#define UCSI_ENABLE_NTFY_PWR_LEVEL_CHANGE	BIT_ULL(22)
+#define UCSI_ENABLE_NTFY_PD_RESET_COMPLETE	BIT_ULL(23)
+#define UCSI_ENABLE_NTFY_CAM_CHANGE		BIT_ULL(24)
+#define UCSI_ENABLE_NTFY_BAT_STATUS_CHANGE	BIT_ULL(25)
+#define UCSI_ENABLE_NTFY_SECURITY_REQ_PARTNER	BIT_ULL(26)
+#define UCSI_ENABLE_NTFY_PARTNER_CHANGE		BIT_ULL(27)
+#define UCSI_ENABLE_NTFY_PWR_DIR_CHANGE		BIT_ULL(28)
+#define UCSI_ENABLE_NTFY_SET_RETIMER_MODE	BIT_ULL(29)
+#define UCSI_ENABLE_NTFY_CONNECTOR_CHANGE	BIT_ULL(30)
+#define UCSI_ENABLE_NTFY_ERROR			BIT_ULL(31)
+#define UCSI_ENABLE_NTFY_SINK_PATH_STS_CHANGE	BIT_ULL(32)
 #define UCSI_ENABLE_NTFY_ALL			0xdbe70000
 
 /* SET_UOR command bits */