drm/i915: Save/restore cursor state on suspend/resume.

This may fix cursor corruption in X on resume, which would persist until
the cursor was hidden and then shown again.

V2: Also include the cursor control regs.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>

drivers/gpu/drm/i915/i915_drv.h

@@ -285,6 +285,13 @@ typedef struct drm_i915_private {
 	u8 saveDACMASK;
 	u8 saveCR[37];
 	uint64_t saveFENCE[16];
+	u32 saveCURACNTR;
+	u32 saveCURAPOS;
+	u32 saveCURABASE;
+	u32 saveCURBCNTR;
+	u32 saveCURBPOS;
+	u32 saveCURBBASE;
+	u32 saveCURSIZE;
 
 	struct {
 		struct drm_mm gtt_space;
@@ -642,6 +649,7 @@ void i915_gem_detach_phys_object(struct drm_device *dev,
 void i915_gem_free_all_phys_object(struct drm_device *dev);
 int i915_gem_object_get_pages(struct drm_gem_object *obj);
 void i915_gem_object_put_pages(struct drm_gem_object *obj);
+void i915_gem_release(struct drm_device * dev, struct drm_file *file_priv);
 
 /* i915_gem_tiling.c */
 void i915_gem_detect_bit_6_swizzle(struct drm_device *dev);

drivers/gpu/drm/i915/i915_suspend.c

@@ -295,6 +295,16 @@ int i915_save_state(struct drm_device *dev)
 	i915_save_palette(dev, PIPE_B);
 	dev_priv->savePIPEBSTAT = I915_READ(PIPEBSTAT);
 
+	/* Cursor state */
+	dev_priv->saveCURACNTR = I915_READ(CURACNTR);
+	dev_priv->saveCURAPOS = I915_READ(CURAPOS);
+	dev_priv->saveCURABASE = I915_READ(CURABASE);
+	dev_priv->saveCURBCNTR = I915_READ(CURBCNTR);
+	dev_priv->saveCURBPOS = I915_READ(CURBPOS);
+	dev_priv->saveCURBBASE = I915_READ(CURBBASE);
+	if (!IS_I9XX(dev))
+		dev_priv->saveCURSIZE = I915_READ(CURSIZE);
+
 	/* CRT state */
 	dev_priv->saveADPA = I915_READ(ADPA);
 
@@ -480,6 +490,16 @@ int i915_restore_state(struct drm_device *dev)
 	I915_WRITE(DSPBCNTR, dev_priv->saveDSPBCNTR);
 	I915_WRITE(DSPBADDR, I915_READ(DSPBADDR));
 
+	/* Cursor state */
+	I915_WRITE(CURAPOS, dev_priv->saveCURAPOS);
+	I915_WRITE(CURACNTR, dev_priv->saveCURACNTR);
+	I915_WRITE(CURABASE, dev_priv->saveCURABASE);
+	I915_WRITE(CURBPOS, dev_priv->saveCURBPOS);
+	I915_WRITE(CURBCNTR, dev_priv->saveCURBCNTR);
+	I915_WRITE(CURBBASE, dev_priv->saveCURBBASE);
+	if (!IS_I9XX(dev))
+		I915_WRITE(CURSIZE, dev_priv->saveCURSIZE);
+
 	/* CRT state */
 	I915_WRITE(ADPA, dev_priv->saveADPA);