mfd: Add support for tps65910 device sleep

Adding support for device sleep through the external input control
signal "SLEEP".
Changing the SLEEP signal state can switch the device into SLEEP and
ACTIVE state.
Also adding sleep configuration for different resources so that they
should be keep on during sleep state of device.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

drivers/mfd/tps65910.c

@@ -90,6 +90,66 @@ static const struct regmap_config tps65910_regmap_config = {
 	.cache_type = REGCACHE_RBTREE,
 };
 
+static int __init tps65910_sleepinit(struct tps65910 *tps65910,
+		struct tps65910_board *pmic_pdata)
+{
+	struct device *dev = NULL;
+	int ret = 0;
+
+	dev = tps65910->dev;
+
+	if (!pmic_pdata->en_dev_slp)
+		return 0;
+
+	/* enabling SLEEP device state */
+	ret = tps65910_set_bits(tps65910, TPS65910_DEVCTRL,
+				DEVCTRL_DEV_SLP_MASK);
+	if (ret < 0) {
+		dev_err(dev, "set dev_slp failed: %d\n", ret);
+		goto err_sleep_init;
+	}
+
+	/* Return if there is no sleep keepon data. */
+	if (!pmic_pdata->slp_keepon)
+		return 0;
+
+	if (pmic_pdata->slp_keepon->therm_keepon) {
+		ret = tps65910_set_bits(tps65910, TPS65910_SLEEP_KEEP_RES_ON,
+				SLEEP_KEEP_RES_ON_THERM_KEEPON_MASK);
+		if (ret < 0) {
+			dev_err(dev, "set therm_keepon failed: %d\n", ret);
+			goto disable_dev_slp;
+		}
+	}
+
+	if (pmic_pdata->slp_keepon->clkout32k_keepon) {
+		ret = tps65910_set_bits(tps65910, TPS65910_SLEEP_KEEP_RES_ON,
+				SLEEP_KEEP_RES_ON_CLKOUT32K_KEEPON_MASK);
+		if (ret < 0) {
+			dev_err(dev, "set clkout32k_keepon failed: %d\n", ret);
+			goto disable_dev_slp;
+		}
+	}
+
+	if (pmic_pdata->slp_keepon->i2chs_keepon) {
+		ret = tps65910_set_bits(tps65910, TPS65910_SLEEP_KEEP_RES_ON,
+				SLEEP_KEEP_RES_ON_I2CHS_KEEPON_MASK);
+		if (ret < 0) {
+			dev_err(dev, "set i2chs_keepon failed: %d\n", ret);
+			goto disable_dev_slp;
+		}
+	}
+
+	return 0;
+
+disable_dev_slp:
+	tps65910_clear_bits(tps65910, TPS65910_DEVCTRL, DEVCTRL_DEV_SLP_MASK);
+
+err_sleep_init:
+	return ret;
+}
+
+
 static int tps65910_i2c_probe(struct i2c_client *i2c,
 			    const struct i2c_device_id *id)
 {
@@ -140,6 +200,8 @@ static int tps65910_i2c_probe(struct i2c_client *i2c,
 
 	tps65910_irq_init(tps65910, init_data->irq, init_data);
 
+	tps65910_sleepinit(tps65910, pmic_plat_data);
+
 	kfree(init_data);
 	return ret;
 

include/linux/mfd/tps65910.h

@@ -783,6 +783,18 @@
 #define TPS65910_SLEEP_CONTROL_EXT_INPUT_EN3		0x4
 #define TPS65911_SLEEP_CONTROL_EXT_INPUT_SLEEP		0x8
 
+/*
+ * Sleep keepon data: Maintains the state in sleep mode
+ * @therm_keepon: Keep on the thermal monitoring in sleep state.
+ * @clkout32k_keepon: Keep on the 32KHz clock output in sleep state.
+ * @i2chs_keepon: Keep on high speed internal clock in sleep state.
+ */
+struct tps65910_sleep_keepon_data {
+	unsigned therm_keepon:1;
+	unsigned clkout32k_keepon:1;
+	unsigned i2chs_keepon:1;
+};
+
 /**
  * struct tps65910_board
  * Board platform data may be used to initialize regulators.
@@ -794,6 +806,8 @@ struct tps65910_board {
 	int irq_base;
 	int vmbch_threshold;
 	int vmbch2_threshold;
+	bool en_dev_slp;
+	struct tps65910_sleep_keepon_data *slp_keepon;
 	bool en_gpio_sleep[TPS6591X_MAX_NUM_GPIO];
 	unsigned long regulator_ext_sleep_control[TPS65910_NUM_REGS];
 	struct regulator_init_data *tps65910_pmic_init_data[TPS65910_NUM_REGS];