Commit 2066fd28 authored by Chaotian Jing's avatar Chaotian Jing Committed by Ulf Hansson

mmc: mediatek: change some dev_err to dev_dbg

there are too many error logs shown when use CMD21/CMD19 to do tune,
and it will appear at each resume time, print out so many logs to the
uart console cost too mush time. so change it to dev_dbg.
Signed-off-by: default avatarChaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
parent ec076cd2
......@@ -972,7 +972,7 @@ static bool msdc_data_xfer_done(struct msdc_host *host, u32 events,
if ((events & MSDC_INT_XFER_COMPL) && (!stop || !stop->error)) {
data->bytes_xfered = data->blocks * data->blksz;
} else {
dev_err(host->dev, "interrupt events: %x\n", events);
dev_dbg(host->dev, "interrupt events: %x\n", events);
msdc_reset_hw(host);
host->error |= REQ_DAT_ERR;
data->bytes_xfered = 0;
......@@ -982,10 +982,10 @@ static bool msdc_data_xfer_done(struct msdc_host *host, u32 events,
else if (events & MSDC_INT_DATCRCERR)
data->error = -EILSEQ;
dev_err(host->dev, "%s: cmd=%d; blocks=%d",
dev_dbg(host->dev, "%s: cmd=%d; blocks=%d",
__func__, mrq->cmd->opcode, data->blocks);
dev_err(host->dev, "data_error=%d xfer_size=%d\n",
(int)data->error, data->bytes_xfered);
dev_dbg(host->dev, "data_error=%d xfer_size=%d\n",
(int)data->error, data->bytes_xfered);
}
msdc_data_xfer_next(host, mrq, data);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment