Commit 2089052f authored by Guenter Roeck's avatar Guenter Roeck Committed by David S. Miller

net: dsa: mv88e6352: Use common port initialization code

This prepares the driver for hardware bridging.
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 8d6d09e7
...@@ -215,28 +215,6 @@ static int mv88e6352_setup_port(struct dsa_switch *ds, int p) ...@@ -215,28 +215,6 @@ static int mv88e6352_setup_port(struct dsa_switch *ds, int p)
val |= 0x000c; val |= 0x000c;
REG_WRITE(addr, 0x04, val); REG_WRITE(addr, 0x04, val);
/* Port Control 1: disable trunking. Also, if this is the
* CPU port, enable learn messages to be sent to this port.
*/
REG_WRITE(addr, 0x05, dsa_is_cpu_port(ds, p) ? 0x8000 : 0x0000);
/* Port based VLAN map: give each port its own address
* database, allow the CPU port to talk to each of the 'real'
* ports, and allow each of the 'real' ports to only talk to
* the upstream port.
*/
val = (p & 0xf) << 12;
if (dsa_is_cpu_port(ds, p))
val |= ds->phys_port_mask;
else
val |= 1 << dsa_upstream_port(ds);
REG_WRITE(addr, 0x06, val);
/* Default VLAN ID and priority: don't set a default VLAN
* ID, and set the default packet priority to zero.
*/
REG_WRITE(addr, 0x07, 0x0000);
/* Port Control 2: don't force a good FCS, set the maximum /* Port Control 2: don't force a good FCS, set the maximum
* frame size to 10240 bytes, don't let the switch add or * frame size to 10240 bytes, don't let the switch add or
* strip 802.1q tags, don't discard tagged or untagged frames * strip 802.1q tags, don't discard tagged or untagged frames
...@@ -281,7 +259,7 @@ static int mv88e6352_setup_port(struct dsa_switch *ds, int p) ...@@ -281,7 +259,7 @@ static int mv88e6352_setup_port(struct dsa_switch *ds, int p)
*/ */
REG_WRITE(addr, 0x19, 0x7654); REG_WRITE(addr, 0x19, 0x7654);
return 0; return mv88e6xxx_setup_port_common(ds, p);
} }
#ifdef CONFIG_NET_DSA_HWMON #ifdef CONFIG_NET_DSA_HWMON
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment