Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (166 commits)
  [PATCH] net: au1000_eth: PHY framework conversion
  [PATCH] 3c5zz ethernet: fix section warnings
  [PATCH] smc ethernet: fix section mismatch warnings
  [PATCH] hp ethernet: fix section mismatches
  [PATCH] Section mismatch in drivers/net/ne.o during modpost
  [PATCH] e1000: prevent statistics from getting garbled during reset
  [PATCH] smc911x Kconfig fix
  [PATCH] forcedeth: new device ids
  [PATCH] forcedeth config: version
  [PATCH] forcedeth config: module parameters
  [PATCH] forcedeth config: diagnostics
  [PATCH] forcedeth config: move functions
  [PATCH] forcedeth config: statistics
  [PATCH] forcedeth config: csum
  [PATCH] forcedeth config: wol
  [PATCH] forcedeth config: phy
  [PATCH] forcedeth config: flow control
  [PATCH] forcedeth config: ring sizes
  [PATCH] forcedeth config: tso cleanup
  [DOC] Update bonding documentation with sysfs info
  ...

Documentation/networking/README.ipw2200

@@ -14,8 +14,8 @@ Copyright (C) 2004-2006, Intel Corporation
 
 README.ipw2200
 
-Version: 1.0.8
-Date   : October 20, 2005
+Version: 1.1.2
+Date   : March 30, 2006
 
 
 Index
@@ -103,7 +103,7 @@ file.
 
 1.1. Overview of Features
 -----------------------------------------------
-The current release (1.0.8) supports the following features:
+The current release (1.1.2) supports the following features:
 
 + BSS mode (Infrastructure, Managed)
 + IBSS mode (Ad-Hoc)
@@ -247,8 +247,8 @@ and can set the contents via echo.  For example:
 % cat /sys/bus/pci/drivers/ipw2200/debug_level
 
 Will report the current debug level of the driver's logging subsystem 
-(only available if CONFIG_IPW_DEBUG was configured when the driver was 
-built).
+(only available if CONFIG_IPW2200_DEBUG was configured when the driver
+was built).
 
 You can set the debug level via:
 

MAINTAINERS

@@ -1425,6 +1425,8 @@ P:	Jesse Brandeburg
 M:	jesse.brandeburg@intel.com
 P:	Jeff Kirsher
 M:	jeffrey.t.kirsher@intel.com
+P:	Auke Kok
+M:	auke-jan.h.kok@intel.com
 W:	http://sourceforge.net/projects/e1000/
 S:	Supported
 
@@ -1437,6 +1439,8 @@ P:	Jesse Brandeburg
 M:	jesse.brandeburg@intel.com
 P:	Jeff Kirsher
 M:	jeffrey.t.kirsher@intel.com
+P:	Auke Kok
+M:	auke-jan.h.kok@intel.com
 W:	http://sourceforge.net/projects/e1000/
 S:	Supported
 
@@ -1449,6 +1453,8 @@ P:	John Ronciak
 M:	john.ronciak@intel.com
 P:	Jesse Brandeburg
 M:	jesse.brandeburg@intel.com
+P:	Auke Kok
+M:	auke-jan.h.kok@intel.com
 W:	http://sourceforge.net/projects/e1000/
 S:	Supported
 

drivers/net/3c501.c

@@ -909,7 +909,7 @@ MODULE_PARM_DESC(irq, "EtherLink IRQ number");
  * here also causes the module to be unloaded
  */
  
-int init_module(void)
+int __init init_module(void)
 {
 	dev_3c501 = el1_probe(-1);
 	if (IS_ERR(dev_3c501))

drivers/net/3c503.c

@@ -688,7 +688,7 @@ MODULE_LICENSE("GPL");
 
 /* This is set up so that only a single autoprobe takes place per call.
 ISA device autoprobes on a running machine are not recommended. */
-int
+int __init
 init_module(void)
 {
 	struct net_device *dev;

drivers/net/3c505.c

@@ -1633,7 +1633,7 @@ MODULE_PARM_DESC(io, "EtherLink Plus I/O base address(es)");
 MODULE_PARM_DESC(irq, "EtherLink Plus IRQ number(s) (assigned)");
 MODULE_PARM_DESC(dma, "EtherLink Plus DMA channel(s)");
 
-int init_module(void)
+int __init init_module(void)
 {
 	int this_dev, found = 0;
 

drivers/net/3c507.c

@@ -932,7 +932,7 @@ module_param(irq, int, 0);
 MODULE_PARM_DESC(io, "EtherLink16 I/O base address");
 MODULE_PARM_DESC(irq, "(ignored)");
 
-int init_module(void)
+int __init init_module(void)
 {
 	if (io == 0)
 		printk("3c507: You should not use auto-probing with insmod!\n");

drivers/net/3c523.c

@@ -1277,7 +1277,7 @@ MODULE_PARM_DESC(io, "EtherLink/MC I/O base address(es)");
 MODULE_PARM_DESC(irq, "EtherLink/MC IRQ number(s)");
 MODULE_LICENSE("GPL");
 
-int init_module(void)
+int __init init_module(void)
 {
 	int this_dev,found = 0;
 

drivers/net/3c527.c

@@ -1646,7 +1646,7 @@ static struct net_device *this_device;
  *	insmod multiple modules for now but it's a hack.
  */
 
-int init_module(void)
+int __init init_module(void)
 {
 	this_device = mc32_probe(-1);
 	if (IS_ERR(this_device))

drivers/net/8139cp.c

@@ -19,11 +19,11 @@
 	See the file COPYING in this distribution for more information.
 
 	Contributors:
-	
+
 		Wake-on-LAN support - Felipe Damasio <felipewd@terra.com.br>
 		PCI suspend/resume  - Felipe Damasio <felipewd@terra.com.br>
 		LinkChg interrupt   - Felipe Damasio <felipewd@terra.com.br>
-			
+
 	TODO:
 	* Test Tx checksumming thoroughly
 	* Implement dev->tx_timeout
@@ -461,7 +461,7 @@ static void cp_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
 static inline void cp_set_rxbufsize (struct cp_private *cp)
 {
 	unsigned int mtu = cp->dev->mtu;
-	
+
 	if (mtu > ETH_DATA_LEN)
 		/* MTU + ethernet header + FCS + optional VLAN tag */
 		cp->rx_buf_sz = mtu + ETH_HLEN + 8;
@@ -510,7 +510,7 @@ static void cp_rx_err_acct (struct cp_private *cp, unsigned rx_tail,
 static inline unsigned int cp_rx_csum_ok (u32 status)
 {
 	unsigned int protocol = (status >> 16) & 0x3;
-	
+
 	if (likely((protocol == RxProtoTCP) && (!(status & TCPFail))))
 		return 1;
 	else if ((protocol == RxProtoUDP) && (!(status & UDPFail)))
@@ -1061,7 +1061,7 @@ static void cp_init_hw (struct cp_private *cp)
 	cpw8(Config3, PARMEnable);
 	cp->wol_enabled = 0;
 
-	cpw8(Config5, cpr8(Config5) & PMEStatus); 
+	cpw8(Config5, cpr8(Config5) & PMEStatus);
 
 	cpw32_f(HiTxRingAddr, 0);
 	cpw32_f(HiTxRingAddr + 4, 0);
@@ -1351,7 +1351,7 @@ static void netdev_get_wol (struct cp_private *cp,
 		         WAKE_MCAST | WAKE_UCAST;
 	/* We don't need to go on if WOL is disabled */
 	if (!cp->wol_enabled) return;
-	
+
 	options        = cpr8 (Config3);
 	if (options & LinkUp)        wol->wolopts |= WAKE_PHY;
 	if (options & MagicPacket)   wol->wolopts |= WAKE_MAGIC;
@@ -1919,7 +1919,7 @@ static int cp_resume (struct pci_dev *pdev)
 	mii_check_media(&cp->mii_if, netif_msg_link(cp), FALSE);
 
 	spin_unlock_irqrestore (&cp->lock, flags);
-	
+
 	return 0;
 }
 #endif /* CONFIG_PM */

drivers/net/8139too.c

@@ -165,7 +165,7 @@ static int multicast_filter_limit = 32;
 static int debug = -1;
 
 /*
- * Receive ring size 
+ * Receive ring size
  * Warning: 64K ring has hardware issues and may lock up.
  */
 #if defined(CONFIG_SH_DREAMCAST)
@@ -257,7 +257,7 @@ static struct pci_device_id rtl8139_pci_tbl[] = {
 	{0x018a, 0x0106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
 	{0x126c, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
 	{0x1743, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
-	{0x021b, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, 
+	{0x021b, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
 
 #ifdef CONFIG_SH_SECUREEDGE5410
 	/* Bogus 8139 silicon reports 8129 without external PROM :-( */
@@ -1824,7 +1824,7 @@ static void rtl8139_rx_err (u32 rx_status, struct net_device *dev,
 	int tmp_work;
 #endif
 
-	if (netif_msg_rx_err (tp)) 
+	if (netif_msg_rx_err (tp))
 		printk(KERN_DEBUG "%s: Ethernet frame had errors, status %8.8x.\n",
 			dev->name, rx_status);
 	tp->stats.rx_errors++;
@@ -1944,7 +1944,7 @@ static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp,
 		 RTL_R16 (RxBufAddr),
 		 RTL_R16 (RxBufPtr), RTL_R8 (ChipCmd));
 
-	while (netif_running(dev) && received < budget 
+	while (netif_running(dev) && received < budget
 	       && (RTL_R8 (ChipCmd) & RxBufEmpty) == 0) {
 		u32 ring_offset = cur_rx % RX_BUF_LEN;
 		u32 rx_status;
@@ -2031,7 +2031,7 @@ static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp,
 
 			netif_receive_skb (skb);
 		} else {
-			if (net_ratelimit()) 
+			if (net_ratelimit())
 				printk (KERN_WARNING
 					"%s: Memory squeeze, dropping packet.\n",
 					dev->name);
@@ -2158,13 +2158,13 @@ static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance,
 	status = RTL_R16 (IntrStatus);
 
 	/* shared irq? */
-	if (unlikely((status & rtl8139_intr_mask) == 0)) 
+	if (unlikely((status & rtl8139_intr_mask) == 0))
 		goto out;
 
 	handled = 1;
 
 	/* h/w no longer present (hotplug?) or major error, bail */
-	if (unlikely(status == 0xFFFF)) 
+	if (unlikely(status == 0xFFFF))
 		goto out;
 
 	/* close possible race's with dev_close */

drivers/net/Kconfig

@@ -447,6 +447,7 @@ config MIPS_GT96100ETH
 config MIPS_AU1X00_ENET
 	bool "MIPS AU1000 Ethernet support"
 	depends on NET_ETHERNET && SOC_AU1X00
+	select PHYLIB
 	select CRC32
 	help
 	  If you have an Alchemy Semi AU1X00 based system
@@ -865,6 +866,22 @@ config DM9000
 	  <file:Documentation/networking/net-modules.txt>.  The module will be
 	  called dm9000.
 
+config SMC911X
+	tristate "SMSC LAN911[5678] support"
+	select CRC32
+	select MII
+	depends on NET_ETHERNET && ARCH_PXA
+	help
+	  This is a driver for SMSC's LAN911x series of Ethernet chipsets
+	  including the new LAN9115, LAN9116, LAN9117, and LAN9118.
+	  Say Y if you want it compiled into the kernel, 
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.linuxdoc.org/docs.html#howto>.
+
+	  This driver is also available as a module. The module will be 
+	  called smc911x.  If you want to compile it as a module, say M 
+	  here and read <file:Documentation/modules.txt>
+
 config NET_VENDOR_RACAL
 	bool "Racal-Interlan (Micom) NI cards"
 	depends on NET_ETHERNET && ISA
@@ -2311,6 +2328,23 @@ config S2IO_NAPI
 
 	  If in doubt, say N.
 
+config MYRI10GE
+	tristate "Myricom Myri-10G Ethernet support"
+	depends on PCI
+	select FW_LOADER
+	select CRC32
+	---help---
+	  This driver supports Myricom Myri-10G Dual Protocol interface in
+	  Ethernet mode. If the eeprom on your board is not recent enough,
+	  you will need a newer firmware image.
+	  You may get this image or more information, at:
+
+	  <http://www.myri.com/Myri-10G/>
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>.  The module
+	  will be called myri10ge.
+
 endmenu
 
 source "drivers/net/tokenring/Kconfig"

drivers/net/Makefile

@@ -192,7 +192,9 @@ obj-$(CONFIG_R8169) += r8169.o
 obj-$(CONFIG_AMD8111_ETH) += amd8111e.o
 obj-$(CONFIG_IBMVETH) += ibmveth.o
 obj-$(CONFIG_S2IO) += s2io.o
+obj-$(CONFIG_MYRI10GE) += myri10ge/
 obj-$(CONFIG_SMC91X) += smc91x.o
+obj-$(CONFIG_SMC911X) += smc911x.o
 obj-$(CONFIG_DM9000) += dm9000.o
 obj-$(CONFIG_FEC_8XX) += fec_8xx/
 

drivers/net/au1000_eth.h

@@ -40,120 +40,6 @@
 
 #define MULTICAST_FILTER_LIMIT 64
 
-/* FIXME 
- * The PHY defines should be in a separate file.
- */
-
-/* MII register offsets */
-#define	MII_CONTROL 0x0000
-#define MII_STATUS  0x0001
-#define MII_PHY_ID0 0x0002
-#define	MII_PHY_ID1 0x0003
-#define MII_ANADV   0x0004
-#define MII_ANLPAR  0x0005
-#define MII_AEXP    0x0006
-#define MII_ANEXT   0x0007
-#define MII_LSI_PHY_CONFIG 0x0011
-/* Status register */
-#define MII_LSI_PHY_STAT   0x0012
-#define MII_AMD_PHY_STAT   MII_LSI_PHY_STAT
-#define MII_INTEL_PHY_STAT 0x0011
-
-#define MII_AUX_CNTRL  0x0018
-/* mii registers specific to AMD 79C901 */
-#define	MII_STATUS_SUMMARY = 0x0018
-
-/* MII Control register bit definitions. */
-#define	MII_CNTL_FDX      0x0100
-#define MII_CNTL_RST_AUTO 0x0200
-#define	MII_CNTL_ISOLATE  0x0400
-#define MII_CNTL_PWRDWN   0x0800
-#define	MII_CNTL_AUTO     0x1000
-#define MII_CNTL_F100     0x2000
-#define	MII_CNTL_LPBK     0x4000
-#define MII_CNTL_RESET    0x8000
-
-/* MII Status register bit  */
-#define	MII_STAT_EXT        0x0001 
-#define MII_STAT_JAB        0x0002
-#define	MII_STAT_LINK       0x0004
-#define MII_STAT_CAN_AUTO   0x0008
-#define	MII_STAT_FAULT      0x0010 
-#define MII_STAT_AUTO_DONE  0x0020
-#define	MII_STAT_CAN_T      0x0800
-#define MII_STAT_CAN_T_FDX  0x1000
-#define	MII_STAT_CAN_TX     0x2000 
-#define MII_STAT_CAN_TX_FDX 0x4000
-#define	MII_STAT_CAN_T4     0x8000
-
-
-#define		MII_ID1_OUI_LO		0xFC00	/* low bits of OUI mask */
-#define		MII_ID1_MODEL		0x03F0	/* model number */
-#define		MII_ID1_REV		0x000F	/* model number */
-
-/* MII NWAY Register Bits ...
-   valid for the ANAR (Auto-Negotiation Advertisement) and
-   ANLPAR (Auto-Negotiation Link Partner) registers */
-#define	MII_NWAY_NODE_SEL 0x001f
-#define MII_NWAY_CSMA_CD  0x0001
-#define	MII_NWAY_T	  0x0020
-#define MII_NWAY_T_FDX    0x0040
-#define	MII_NWAY_TX       0x0080
-#define MII_NWAY_TX_FDX   0x0100
-#define	MII_NWAY_T4       0x0200 
-#define MII_NWAY_PAUSE    0x0400 
-#define	MII_NWAY_RF       0x2000 /* Remote Fault */
-#define MII_NWAY_ACK      0x4000 /* Remote Acknowledge */
-#define	MII_NWAY_NP       0x8000 /* Next Page (Enable) */
-
-/* mii stsout register bits */
-#define	MII_STSOUT_LINK_FAIL 0x4000
-#define	MII_STSOUT_SPD       0x0080
-#define MII_STSOUT_DPLX      0x0040
-
-/* mii stsics register bits */
-#define	MII_STSICS_SPD       0x8000
-#define MII_STSICS_DPLX      0x4000
-#define	MII_STSICS_LINKSTS   0x0001
-
-/* mii stssum register bits */
-#define	MII_STSSUM_LINK  0x0008
-#define MII_STSSUM_DPLX  0x0004
-#define	MII_STSSUM_AUTO  0x0002
-#define MII_STSSUM_SPD   0x0001
-
-/* lsi phy status register */
-#define MII_LSI_PHY_STAT_FDX	0x0040
-#define MII_LSI_PHY_STAT_SPD	0x0080
-
-/* amd phy status register */
-#define MII_AMD_PHY_STAT_FDX	0x0800
-#define MII_AMD_PHY_STAT_SPD	0x0400
-
-/* intel phy status register */
-#define MII_INTEL_PHY_STAT_FDX	0x0200
-#define MII_INTEL_PHY_STAT_SPD	0x4000
-
-/* Auxilliary Control/Status Register */
-#define MII_AUX_FDX      0x0001
-#define MII_AUX_100      0x0002
-#define MII_AUX_F100     0x0004
-#define MII_AUX_ANEG     0x0008
-
-typedef struct mii_phy {
-	struct mii_phy * next;
-	struct mii_chip_info * chip_info;
-	u16 status;
-	u32 *mii_control_reg;
-	u32 *mii_data_reg;
-} mii_phy_t;
-
-struct phy_ops {
-	int (*phy_init) (struct net_device *, int);
-	int (*phy_reset) (struct net_device *, int);
-	int (*phy_status) (struct net_device *, int, u16 *, u16 *);
-};
-
 /* 
  * Data Buffer Descriptor. Data buffers must be aligned on 32 byte 
  * boundary for both, receive and transmit.
@@ -200,7 +86,6 @@ typedef struct mac_reg {
 
 
 struct au1000_private {
-	
 	db_dest_t *pDBfree;
 	db_dest_t db[NUM_RX_BUFFS+NUM_TX_BUFFS];
 	volatile rx_dma_t *rx_dma_ring[NUM_RX_DMA];
@@ -213,8 +98,15 @@ struct au1000_private {
 	u32 tx_full;
 
 	int mac_id;
-	mii_phy_t *mii;
-	struct phy_ops *phy_ops;
+
+	int mac_enabled;       /* whether MAC is currently enabled and running (req. for mdio) */
+
+	int old_link;          /* used by au1000_adjust_link */
+	int old_speed;
+	int old_duplex;
+
+	struct phy_device *phy_dev;
+	struct mii_bus mii_bus;
 	
 	/* These variables are just for quick access to certain regs addresses. */
 	volatile mac_reg_t *mac;  /* mac registers                      */   
@@ -223,14 +115,6 @@ struct au1000_private {
 	u32 vaddr;                /* virtual address of rx/tx buffers   */
 	dma_addr_t dma_addr;      /* dma address of rx/tx buffers       */
 
-	u8 *hash_table;
-	u32 hash_mode;
-	u32 intr_work_done; /* number of Rx and Tx pkts processed in the isr */
-	int phy_addr;          /* phy address */
-	u32 options;           /* User-settable misc. driver options. */
-	u32 drv_flags;
-	int want_autoneg;
 	struct net_device_stats stats;
-	struct timer_list timer;
 	spinlock_t lock;       /* Serialise access to device */
 };

drivers/net/cassini.c

@@ -4877,7 +4877,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
 				  const struct pci_device_id *ent)
 {
 	static int cas_version_printed = 0;
-	unsigned long casreg_base, casreg_len;
+	unsigned long casreg_len;
 	struct net_device *dev;
 	struct cas *cp;
 	int i, err, pci_using_dac;
@@ -4972,7 +4972,6 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
 		pci_using_dac = 0;
 	}
 
-	casreg_base = pci_resource_start(pdev, 0);
 	casreg_len = pci_resource_len(pdev, 0);
 
 	cp = netdev_priv(dev);
@@ -5024,7 +5023,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
 	cp->timer_ticks = 0;
 
 	/* give us access to cassini registers */
-	cp->regs = ioremap(casreg_base, casreg_len);
+	cp->regs = pci_iomap(pdev, 0, casreg_len);
 	if (cp->regs == 0UL) {
 		printk(KERN_ERR PFX "Cannot map device registers, "
 		       "aborting.\n");
@@ -5123,7 +5122,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
 		cas_shutdown(cp);
 	mutex_unlock(&cp->pm_mutex);
 
-	iounmap(cp->regs);
+	pci_iounmap(pdev, cp->regs);
 
 
 err_out_free_res:
@@ -5171,7 +5170,7 @@ static void __devexit cas_remove_one(struct pci_dev *pdev)
 #endif
 	pci_free_consistent(pdev, sizeof(struct cas_init_block),
 			    cp->init_block, cp->block_dvma);
-	iounmap(cp->regs);
+	pci_iounmap(pdev, cp->regs);
 	free_netdev(dev);
 	pci_release_regions(pdev);
 	pci_disable_device(pdev);

drivers/net/e100.c

@@ -2780,6 +2780,80 @@ static void e100_shutdown(struct pci_dev *pdev)
 		DPRINTK(PROBE,ERR, "Error enabling wake\n");
 }
 
+/* ------------------ PCI Error Recovery infrastructure  -------------- */
+/**
+ * e100_io_error_detected - called when PCI error is detected.
+ * @pdev: Pointer to PCI device
+ * @state: The current pci conneection state
+ */
+static pci_ers_result_t e100_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+
+	/* Similar to calling e100_down(), but avoids adpater I/O. */
+	netdev->stop(netdev);
+
+	/* Detach; put netif into state similar to hotplug unplug. */
+	netif_poll_enable(netdev);
+	netif_device_detach(netdev);
+
+	/* Request a slot reset. */
+	return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * e100_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch.
+ */
+static pci_ers_result_t e100_io_slot_reset(struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct nic *nic = netdev_priv(netdev);
+
+	if (pci_enable_device(pdev)) {
+		printk(KERN_ERR "e100: Cannot re-enable PCI device after reset.\n");
+		return PCI_ERS_RESULT_DISCONNECT;
+	}
+	pci_set_master(pdev);
+
+	/* Only one device per card can do a reset */
+	if (0 != PCI_FUNC(pdev->devfn))
+		return PCI_ERS_RESULT_RECOVERED;
+	e100_hw_reset(nic);
+	e100_phy_init(nic);
+
+	return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * e100_io_resume - resume normal operations
+ * @pdev: Pointer to PCI device
+ *
+ * Resume normal operations after an error recovery
+ * sequence has been completed.
+ */
+static void e100_io_resume(struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct nic *nic = netdev_priv(netdev);
+
+	/* ack any pending wake events, disable PME */
+	pci_enable_wake(pdev, 0, 0);
+
+	netif_device_attach(netdev);
+	if (netif_running(netdev)) {
+		e100_open(netdev);
+		mod_timer(&nic->watchdog, jiffies);
+	}
+}
+
+static struct pci_error_handlers e100_err_handler = {
+	.error_detected = e100_io_error_detected,
+	.slot_reset = e100_io_slot_reset,
+	.resume = e100_io_resume,
+};
 
 static struct pci_driver e100_driver = {
 	.name =         DRV_NAME,
@@ -2791,6 +2865,7 @@ static struct pci_driver e100_driver = {
 	.resume =       e100_resume,
 #endif
 	.shutdown =     e100_shutdown,
+	.err_handler = &e100_err_handler,
 };
 
 static int __init e100_init_module(void)

drivers/net/e1000/Makefile

 ################################################################################
 #
 # 
-# Copyright(c) 1999 - 2003 Intel Corporation. All rights reserved.
+# Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved.
 # 
 # This program is free software; you can redistribute it and/or modify it 
 # under the terms of the GNU General Public License as published by the Free 
@@ -22,6 +22,7 @@
 # 
 # Contact Information:
 # Linux NICS <linux.nics@intel.com>
+# e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
 # Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 #
 ################################################################################

drivers/net/e1000/e1000.h

 /*******************************************************************************
 
   
-  Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+  Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved.
   
   This program is free software; you can redistribute it and/or modify it 
   under the terms of the GNU General Public License as published by the Free 
@@ -22,6 +22,7 @@
   
   Contact Information:
   Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 
 *******************************************************************************/
@@ -114,6 +115,8 @@ struct e1000_adapter;
 /* Supported Rx Buffer Sizes */
 #define E1000_RXBUFFER_128   128    /* Used for packet split */
 #define E1000_RXBUFFER_256   256    /* Used for packet split */
+#define E1000_RXBUFFER_512   512
+#define E1000_RXBUFFER_1024  1024
 #define E1000_RXBUFFER_2048  2048
 #define E1000_RXBUFFER_4096  4096
 #define E1000_RXBUFFER_8192  8192
@@ -334,7 +337,6 @@ struct e1000_adapter {
 	boolean_t have_msi;
 #endif
 	/* to not mess up cache alignment, always add to the bottom */
-	boolean_t txb2b;
 #ifdef NETIF_F_TSO
 	boolean_t tso_force;
 #endif

drivers/net/e1000/e1000_ethtool.c

 /*******************************************************************************
 
   
-  Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+  Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved.
   
   This program is free software; you can redistribute it and/or modify it 
   under the terms of the GNU General Public License as published by the Free 
@@ -22,6 +22,7 @@
   
   Contact Information:
   Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 
 *******************************************************************************/
@@ -864,8 +865,8 @@ static int
 e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data)
 {
 	struct net_device *netdev = adapter->netdev;
- 	uint32_t mask, i=0, shared_int = TRUE;
- 	uint32_t irq = adapter->pdev->irq;
+	uint32_t mask, i=0, shared_int = TRUE;
+	uint32_t irq = adapter->pdev->irq;
 
 	*data = 0;
 
@@ -891,22 +892,22 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data)
 		/* Interrupt to test */
 		mask = 1 << i;
 
- 		if (!shared_int) {
- 			/* Disable the interrupt to be reported in
- 			 * the cause register and then force the same
- 			 * interrupt and see if one gets posted.  If
- 			 * an interrupt was posted to the bus, the
- 			 * test failed.
- 			 */
- 			adapter->test_icr = 0;
- 			E1000_WRITE_REG(&adapter->hw, IMC, mask);
- 			E1000_WRITE_REG(&adapter->hw, ICS, mask);
- 			msec_delay(10);
-
- 			if (adapter->test_icr & mask) {
- 				*data = 3;
- 				break;
- 			}
+		if (!shared_int) {
+			/* Disable the interrupt to be reported in
+			 * the cause register and then force the same
+			 * interrupt and see if one gets posted.  If
+			 * an interrupt was posted to the bus, the
+			 * test failed.
+			 */
+			adapter->test_icr = 0;
+			E1000_WRITE_REG(&adapter->hw, IMC, mask);
+			E1000_WRITE_REG(&adapter->hw, ICS, mask);
+			msec_delay(10);
+
+			if (adapter->test_icr & mask) {
+				*data = 3;
+				break;
+			}
 		}
 
 		/* Enable the interrupt to be reported in
@@ -925,7 +926,7 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data)
 			break;
 		}
 
- 		if (!shared_int) {
+		if (!shared_int) {
 			/* Disable the other interrupts to be reported in
 			 * the cause register and then force the other
 			 * interrupts and see if any get posted.  If

drivers/net/e1000/e1000_hw.h

 /*******************************************************************************
 
   
-  Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+  Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved.
   
   This program is free software; you can redistribute it and/or modify it 
   under the terms of the GNU General Public License as published by the Free 
@@ -22,6 +22,7 @@
   
   Contact Information:
   Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 
 *******************************************************************************/
@@ -374,7 +375,7 @@ struct e1000_host_mng_dhcp_cookie{
 };
 #endif
 
-int32_t e1000_mng_write_dhcp_info(struct e1000_hw *hw, uint8_t *buffer, 
+int32_t e1000_mng_write_dhcp_info(struct e1000_hw *hw, uint8_t *buffer,
 							uint16_t length);
 boolean_t e1000_check_mng_mode(struct e1000_hw *hw);
 boolean_t e1000_enable_tx_pkt_filtering(struct e1000_hw *hw);
@@ -1801,7 +1802,7 @@ struct e1000_hw {
  *       value2 = [0..64512],    default=4096
  *       value3 = [0..64512],    default=0
  */
-    
+
 #define E1000_PSRCTL_BSIZE0_MASK   0x0000007F
 #define E1000_PSRCTL_BSIZE1_MASK   0x00003F00
 #define E1000_PSRCTL_BSIZE2_MASK   0x003F0000

drivers/net/e1000/e1000_osdep.h

 /*******************************************************************************
 
   
-  Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+  Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved.
   
   This program is free software; you can redistribute it and/or modify it 
   under the terms of the GNU General Public License as published by the Free 
@@ -22,6 +22,7 @@
   
   Contact Information:
   Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 
 *******************************************************************************/

drivers/net/e1000/e1000_param.c

 /*******************************************************************************
 
   
-  Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+  Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved.
   
   This program is free software; you can redistribute it and/or modify it 
   under the terms of the GNU General Public License as published by the Free 
@@ -22,6 +22,7 @@
   
   Contact Information:
   Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 
 *******************************************************************************/

drivers/net/epic100.c

@@ -21,15 +21,15 @@
 	http://www.scyld.com/network/epic100.html
 
 	---------------------------------------------------------------------
-	
+
 	Linux kernel-specific changes:
-	
+
 	LK1.1.2 (jgarzik):
 	* Merge becker version 1.09 (4/08/2000)
 
 	LK1.1.3:
 	* Major bugfix to 1.09 driver (Francis Romieu)
-	
+
 	LK1.1.4 (jgarzik):
 	* Merge becker test version 1.09 (5/29/2000)
 
@@ -66,7 +66,7 @@
 	LK1.1.14 (Kryzsztof Halasa):
 	* fix spurious bad initializations
 	* pound phy a la SMSC's app note on the subject
-	
+
 	AC1.1.14ac
 	* fix power up/down for ethtool that broke in 1.11
 
@@ -244,7 +244,7 @@ static struct pci_device_id epic_pci_tbl[] = {
 };
 MODULE_DEVICE_TABLE (pci, epic_pci_tbl);
 
-	
+
 #ifndef USE_IO_OPS
 #undef inb
 #undef inw
@@ -370,7 +370,7 @@ static int epic_close(struct net_device *dev);
 static struct net_device_stats *epic_get_stats(struct net_device *dev);
 static void set_rx_mode(struct net_device *dev);
 
-
+
 
 static int __devinit epic_init_one (struct pci_dev *pdev,
 				    const struct pci_device_id *ent)
@@ -392,9 +392,9 @@ static int __devinit epic_init_one (struct pci_dev *pdev,
 		printk (KERN_INFO "%s" KERN_INFO "%s" KERN_INFO "%s",
 			version, version2, version3);
 #endif
-	
+
 	card_idx++;
-	
+
 	ret = pci_enable_device(pdev);
 	if (ret)
 		goto out;
@@ -405,7 +405,7 @@ static int __devinit epic_init_one (struct pci_dev *pdev,
 		ret = -ENODEV;
 		goto err_out_disable;
 	}
-	
+
 	pci_set_master(pdev);
 
 	ret = pci_request_regions(pdev, DRV_NAME);
@@ -498,7 +498,7 @@ static int __devinit epic_init_one (struct pci_dev *pdev,
 	ep->pci_dev = pdev;
 	ep->chip_id = chip_idx;
 	ep->chip_flags = pci_id_tbl[chip_idx].drv_flags;
-	ep->irq_mask = 
+	ep->irq_mask =
 		(ep->chip_flags & TYPE2_INTR ?  PCIBusErr175 : PCIBusErr170)
 		 | CntFull | TxUnderrun | EpicNapiEvent;
 
@@ -587,7 +587,7 @@ static int __devinit epic_init_one (struct pci_dev *pdev,
 	pci_disable_device(pdev);
 	goto out;
 }
-
+
 /* Serial EEPROM section. */
 
 /*  EEPROM_Ctrl bits. */
@@ -709,7 +709,7 @@ static void mdio_write(struct net_device *dev, int phy_id, int loc, int value)
 
 	outw(value, ioaddr + MIIData);
 	outl((phy_id << 9) | (loc << 4) | MII_WRITEOP, ioaddr + MIICtrl);
-	for (i = 10000; i > 0; i--) { 
+	for (i = 10000; i > 0; i--) {
 		barrier();
 		if ((inl(ioaddr + MIICtrl) & MII_WRITEOP) == 0)
 			break;
@@ -717,7 +717,7 @@ static void mdio_write(struct net_device *dev, int phy_id, int loc, int value)
 	return;
 }
 
-
+
 static int epic_open(struct net_device *dev)
 {
 	struct epic_private *ep = dev->priv;
@@ -760,7 +760,7 @@ static int epic_open(struct net_device *dev)
 #endif
 
 	udelay(20); /* Looks like EPII needs that if you want reliable RX init. FIXME: pci posting bug? */
-	
+
 	for (i = 0; i < 3; i++)
 		outl(cpu_to_le16(((u16*)dev->dev_addr)[i]), ioaddr + LAN0 + i*4);
 
@@ -803,7 +803,7 @@ static int epic_open(struct net_device *dev)
 
 	/* Enable interrupts by setting the interrupt mask. */
 	outl((ep->chip_flags & TYPE2_INTR ? PCIBusErr175 : PCIBusErr170)
-		 | CntFull | TxUnderrun 
+		 | CntFull | TxUnderrun
 		 | RxError | RxHeader | EpicNapiEvent, ioaddr + INTMASK);
 
 	if (debug > 1)
@@ -831,7 +831,7 @@ static void epic_pause(struct net_device *dev)
 	struct epic_private *ep = dev->priv;
 
 	netif_stop_queue (dev);
-	
+
 	/* Disable interrupts by clearing the interrupt mask. */
 	outl(0x00000000, ioaddr + INTMASK);
 	/* Stop the chip's Tx and Rx DMA processes. */
@@ -987,7 +987,7 @@ static void epic_init_ring(struct net_device *dev)
 	for (i = 0; i < RX_RING_SIZE; i++) {
 		ep->rx_ring[i].rxstatus = 0;
 		ep->rx_ring[i].buflength = cpu_to_le32(ep->rx_buf_sz);
-		ep->rx_ring[i].next = ep->rx_ring_dma + 
+		ep->rx_ring[i].next = ep->rx_ring_dma +
 				      (i+1)*sizeof(struct epic_rx_desc);
 		ep->rx_skbuff[i] = NULL;
 	}
@@ -1002,7 +1002,7 @@ static void epic_init_ring(struct net_device *dev)
 			break;
 		skb->dev = dev;			/* Mark as being used by this device. */
 		skb_reserve(skb, 2);	/* 16 byte align the IP header. */
-		ep->rx_ring[i].bufaddr = pci_map_single(ep->pci_dev, 
+		ep->rx_ring[i].bufaddr = pci_map_single(ep->pci_dev,
 			skb->data, ep->rx_buf_sz, PCI_DMA_FROMDEVICE);
 		ep->rx_ring[i].rxstatus = cpu_to_le32(DescOwn);
 	}
@@ -1013,7 +1013,7 @@ static void epic_init_ring(struct net_device *dev)
 	for (i = 0; i < TX_RING_SIZE; i++) {
 		ep->tx_skbuff[i] = NULL;
 		ep->tx_ring[i].txstatus = 0x0000;
-		ep->tx_ring[i].next = ep->tx_ring_dma + 
+		ep->tx_ring[i].next = ep->tx_ring_dma +
 			(i+1)*sizeof(struct epic_tx_desc);
 	}
 	ep->tx_ring[i-1].next = ep->tx_ring_dma;
@@ -1026,7 +1026,7 @@ static int epic_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	int entry, free_count;
 	u32 ctrl_word;
 	unsigned long flags;
-	
+
 	if (skb->len < ETH_ZLEN) {
 		skb = skb_padto(skb, ETH_ZLEN);
 		if (skb == NULL)
@@ -1042,7 +1042,7 @@ static int epic_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	entry = ep->cur_tx % TX_RING_SIZE;
 
 	ep->tx_skbuff[entry] = skb;
-	ep->tx_ring[entry].bufaddr = pci_map_single(ep->pci_dev, skb->data, 
+	ep->tx_ring[entry].bufaddr = pci_map_single(ep->pci_dev, skb->data,
 		 			            skb->len, PCI_DMA_TODEVICE);
 	if (free_count < TX_QUEUE_LEN/2) {/* Typical path */
 		ctrl_word = cpu_to_le32(0x100000); /* No interrupt */
@@ -1126,7 +1126,7 @@ static void epic_tx(struct net_device *dev, struct epic_private *ep)
 
 		/* Free the original skb. */
 		skb = ep->tx_skbuff[entry];
-		pci_unmap_single(ep->pci_dev, ep->tx_ring[entry].bufaddr, 
+		pci_unmap_single(ep->pci_dev, ep->tx_ring[entry].bufaddr,
 				 skb->len, PCI_DMA_TODEVICE);
 		dev_kfree_skb_irq(skb);
 		ep->tx_skbuff[entry] = NULL;
@@ -1281,8 +1281,8 @@ static int epic_rx(struct net_device *dev, int budget)
 							       ep->rx_buf_sz,
 							       PCI_DMA_FROMDEVICE);
 			} else {
-				pci_unmap_single(ep->pci_dev, 
-					ep->rx_ring[entry].bufaddr, 
+				pci_unmap_single(ep->pci_dev,
+					ep->rx_ring[entry].bufaddr,
 					ep->rx_buf_sz, PCI_DMA_FROMDEVICE);
 				skb_put(skb = ep->rx_skbuff[entry], pkt_len);
 				ep->rx_skbuff[entry] = NULL;
@@ -1307,7 +1307,7 @@ static int epic_rx(struct net_device *dev, int budget)
 				break;
 			skb->dev = dev;			/* Mark as being used by this device. */
 			skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
-			ep->rx_ring[entry].bufaddr = pci_map_single(ep->pci_dev, 
+			ep->rx_ring[entry].bufaddr = pci_map_single(ep->pci_dev,
 				skb->data, ep->rx_buf_sz, PCI_DMA_FROMDEVICE);
 			work_done++;
 		}
@@ -1403,7 +1403,7 @@ static int epic_close(struct net_device *dev)
 		ep->rx_ring[i].rxstatus = 0;		/* Not owned by Epic chip. */
 		ep->rx_ring[i].buflength = 0;
 		if (skb) {
-			pci_unmap_single(ep->pci_dev, ep->rx_ring[i].bufaddr, 
+			pci_unmap_single(ep->pci_dev, ep->rx_ring[i].bufaddr,
 				 	 ep->rx_buf_sz, PCI_DMA_FROMDEVICE);
 			dev_kfree_skb(skb);
 		}
@@ -1414,7 +1414,7 @@ static int epic_close(struct net_device *dev)
 		ep->tx_skbuff[i] = NULL;
 		if (!skb)
 			continue;
-		pci_unmap_single(ep->pci_dev, ep->tx_ring[i].bufaddr, 
+		pci_unmap_single(ep->pci_dev, ep->tx_ring[i].bufaddr,
 				 skb->len, PCI_DMA_TODEVICE);
 		dev_kfree_skb(skb);
 	}
@@ -1607,7 +1607,7 @@ static void __devexit epic_remove_one (struct pci_dev *pdev)
 {
 	struct net_device *dev = pci_get_drvdata(pdev);
 	struct epic_private *ep = dev->priv;
-	
+
 	pci_free_consistent(pdev, TX_TOTAL_SIZE, ep->tx_ring, ep->tx_ring_dma);
 	pci_free_consistent(pdev, RX_TOTAL_SIZE, ep->rx_ring, ep->rx_ring_dma);
 	unregister_netdev(dev);

drivers/net/hp-plus.c

@@ -446,7 +446,7 @@ MODULE_LICENSE("GPL");
 
 /* This is set up so that only a single autoprobe takes place per call.
 ISA device autoprobes on a running machine are not recommended. */
-int
+int __init
 init_module(void)
 {
 	struct net_device *dev;

drivers/net/hp.c

@@ -384,7 +384,7 @@ hp_block_output(struct net_device *dev, int count,
 }
 
 /* This function resets the ethercard if something screws up. */
-static void
+static void __init
 hp_init_card(struct net_device *dev)
 {
 	int irq = dev->irq;
@@ -409,7 +409,7 @@ MODULE_LICENSE("GPL");
 
 /* This is set up so that only a single autoprobe takes place per call.
 ISA device autoprobes on a running machine are not recommended. */
-int
+int __init
 init_module(void)
 {
 	struct net_device *dev;

drivers/net/ibmlana.c

-/* 
+/*
 net-3-driver for the IBM LAN Adapter/A
 
 This is an extension to the Linux operating system, and is covered by the
@@ -11,9 +11,9 @@ This driver is based both on the SK_MCA driver, which is itself based on the
 SK_G16 and 3C523 driver.
 
 paper sources:
-  'PC Hardware: Aufbau, Funktionsweise, Programmierung' by 
+  'PC Hardware: Aufbau, Funktionsweise, Programmierung' by
   Hans-Peter Messmer for the basic Microchannel stuff
-  
+
   'Linux Geraetetreiber' by Allesandro Rubini, Kalle Dalheimer
   for help on Ethernet driver programming
 
@@ -27,14 +27,14 @@ paper sources:
 
 special acknowledgements to:
   - Bob Eager for helping me out with documentation from IBM
-  - Jim Shorney for his endless patience with me while I was using 
+  - Jim Shorney for his endless patience with me while I was using
     him as a beta tester to trace down the address filter bug ;-)
 
   Missing things:
 
   -> set debug level via ioctl instead of compile-time switches
   -> I didn't follow the development of the 2.1.x kernels, so my
-     assumptions about which things changed with which kernel version 
+     assumptions about which things changed with which kernel version
      are probably nonsense
 
 History:
@@ -275,7 +275,7 @@ static void InitDscrs(struct net_device *dev)
 	priv->rrastart = raddr = priv->txbufstart + (TXBUFCNT * PKTSIZE);
 	priv->rdastart = addr = priv->rrastart + (priv->rxbufcnt * sizeof(rra_t));
 	priv->rxbufstart = baddr = priv->rdastart + (priv->rxbufcnt * sizeof(rda_t));
-	
+
 	for (z = 0; z < priv->rxbufcnt; z++) {
 		rra.startlo = baddr;
 		rra.starthi = 0;
@@ -570,7 +570,7 @@ static void irqrx_handler(struct net_device *dev)
 		lrdaaddr = priv->rdastart + (priv->lastrxdescr * sizeof(rda_t));
 		memcpy_fromio(&rda, priv->base + rdaaddr, sizeof(rda_t));
 
-		/* iron out upper word halves of fields we use - SONIC will duplicate 
+		/* iron out upper word halves of fields we use - SONIC will duplicate
 		   bits 0..15 to 16..31 */
 
 		rda.status &= 0xffff;
@@ -836,9 +836,9 @@ static int ibmlana_tx(struct sk_buff *skb, struct net_device *dev)
 	baddr = priv->txbufstart + (priv->nexttxdescr * PKTSIZE);
 	memcpy_toio(priv->base + baddr, skb->data, skb->len);
 
-	/* copy filler into RAM - in case we're filling up... 
+	/* copy filler into RAM - in case we're filling up...
 	   we're filling a bit more than necessary, but that doesn't harm
-	   since the buffer is far larger... 
+	   since the buffer is far larger...
 	   Sorry Linus for the filler string but I couldn't resist ;-) */
 
 	if (tmplen > skb->len) {
@@ -952,7 +952,7 @@ static int ibmlana_probe(struct net_device *dev)
 	priv->realirq = irq;
 	priv->medium = medium;
 	spin_lock_init(&priv->lock);
-		
+
 
 	/* set base + irq for this device (irq not allocated so far) */
 

drivers/net/ibmlana.h

@@ -17,7 +17,7 @@
 /* media enumeration - defined in a way that it fits onto the LAN/A's
    POS registers... */
 
-typedef enum { 
+typedef enum {
 	Media_10BaseT, Media_10Base5,
 	Media_Unknown, Media_10Base2, Media_Count
 } ibmlana_medium;
@@ -27,7 +27,7 @@ typedef enum {
 typedef struct {
 	unsigned int slot;		/* MCA-Slot-#                       */
 	struct net_device_stats stat;	/* packet statistics            */
-	int realirq;			/* memorizes actual IRQ, even when 
+	int realirq;			/* memorizes actual IRQ, even when
 					   currently not allocated          */
 	ibmlana_medium medium;		/* physical cannector               */
 	u32 	tdastart, txbufstart,	/* addresses                        */
@@ -41,7 +41,7 @@ typedef struct {
 	spinlock_t lock;
 } ibmlana_priv;
 
-/* this card uses quite a lot of I/O ports...luckily the MCA bus decodes 
+/* this card uses quite a lot of I/O ports...luckily the MCA bus decodes
    a full 64K I/O range... */
 
 #define IBM_LANA_IORANGE 0xa0

drivers/net/ibmveth.h

@@ -75,10 +75,13 @@
 
 #define IbmVethNumBufferPools 5
 #define IBMVETH_BUFF_OH 22 /* Overhead: 14 ethernet header + 8 opaque handle */
+#define IBMVETH_MAX_MTU 68
+#define IBMVETH_MAX_POOL_COUNT 4096
+#define IBMVETH_MAX_BUF_SIZE (1024 * 128)
 
-/* pool_size should be sorted */
 static int pool_size[] = { 512, 1024 * 2, 1024 * 16, 1024 * 32, 1024 * 64 };
 static int pool_count[] = { 256, 768, 256, 256, 256 };
+static int pool_active[] = { 1, 1, 0, 0, 0};
 
 #define IBM_VETH_INVALID_MAP ((u16)0xffff)
 
@@ -94,6 +97,7 @@ struct ibmveth_buff_pool {
     dma_addr_t *dma_addr;
     struct sk_buff **skbuff;
     int active;
+    struct kobject kobj;
 };
 
 struct ibmveth_rx_q {
@@ -118,6 +122,7 @@ struct ibmveth_adapter {
     dma_addr_t filter_list_dma;
     struct ibmveth_buff_pool rx_buff_pool[IbmVethNumBufferPools];
     struct ibmveth_rx_q rx_queue;
+    int pool_config;
 
     /* adapter specific stats */
     u64 replenish_task_cycles;
@@ -134,7 +139,7 @@ struct ibmveth_adapter {
     spinlock_t stats_lock;
 };
 
-struct ibmveth_buf_desc_fields {	
+struct ibmveth_buf_desc_fields {
     u32 valid : 1;
     u32 toggle : 1;
     u32 reserved : 6;
@@ -143,7 +148,7 @@ struct ibmveth_buf_desc_fields {
 };
 
 union ibmveth_buf_desc {
-    u64 desc;	
+    u64 desc;
     struct ibmveth_buf_desc_fields fields;
 };
 

drivers/net/ixgb/Makefile

 ################################################################################
 #
 # 
-# Copyright(c) 1999 - 2002 Intel Corporation. All rights reserved.
+# Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved.
 # 
 # This program is free software; you can redistribute it and/or modify it 
 # under the terms of the GNU General Public License as published by the Free 

drivers/net/ixgb/ixgb_ee.c

 /*******************************************************************************
 
   
-  Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+  Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved.
   
   This program is free software; you can redistribute it and/or modify it 
   under the terms of the GNU General Public License as published by the Free 

drivers/net/ixgb/ixgb_ee.h

 /*******************************************************************************
 
   
-  Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+  Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved.
   
   This program is free software; you can redistribute it and/or modify it 
   under the terms of the GNU General Public License as published by the Free 

drivers/net/ixgb/ixgb_hw.c

 /*******************************************************************************
 
   
-  Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+  Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved.
   
   This program is free software; you can redistribute it and/or modify it 
   under the terms of the GNU General Public License as published by the Free 

drivers/net/myri10ge/Makefile

+#
+# Makefile for the Myricom Myri-10G ethernet driver
+#
+
+obj-$(CONFIG_MYRI10GE) += myri10ge.o