Commit 20bb8685 authored by Keith Owens's avatar Keith Owens Committed by Tony Luck

[IA64] Wire in the MCA/INIT handler stacks

Wire the MCA/INIT handler stacks into DTR[2] and track them in
IA64_KR(CURRENT_STACK).  This gives the MCA/INIT handler stacks the
same TLB status as normal kernel stacks.  Reload the old CURRENT_STACK
data on return from OS to SAL.
Signed-off-by: default avatarKeith Owens <kaos@sgi.com>
Signed-off-by: default avatarTony Luck <tony.luck@intel.com>
parent 83a78d9b
......@@ -489,24 +489,27 @@ ia64_state_save:
;;
st8 [temp1]=r17,16 // pal_min_state
st8 [temp2]=r6,16 // prev_IA64_KR_CURRENT
mov r6=IA64_KR(CURRENT_STACK)
;;
st8 [temp1]=r6,16 // prev_IA64_KR_CURRENT_STACK
st8 [temp2]=r0,16 // prev_task, starts off as NULL
mov r6=cr.ifa
;;
st8 [temp1]=r0,16 // prev_task, starts off as NULL
st8 [temp2]=r12,16 // cr.isr
st8 [temp1]=r12,16 // cr.isr
st8 [temp2]=r6,16 // cr.ifa
mov r12=cr.itir
;;
st8 [temp1]=r6,16 // cr.ifa
st8 [temp2]=r12,16 // cr.itir
st8 [temp1]=r12,16 // cr.itir
st8 [temp2]=r11,16 // cr.iipa
mov r12=cr.iim
;;
st8 [temp1]=r11,16 // cr.iipa
st8 [temp2]=r12,16 // cr.iim
mov r6=cr.iha
st8 [temp1]=r12,16 // cr.iim
(p1) mov r12=IA64_MCA_COLD_BOOT
(p2) mov r12=IA64_INIT_WARM_BOOT
mov r6=cr.iha
;;
st8 [temp1]=r6,16 // cr.iha
st8 [temp2]=r12 // os_status, default is cold boot
st8 [temp2]=r6,16 // cr.iha
st8 [temp1]=r12 // os_status, default is cold boot
mov r6=IA64_MCA_SAME_CONTEXT
;;
st8 [temp1]=r6 // context, default is same context
......@@ -823,9 +826,12 @@ ia64_state_restore:
ld8 r12=[temp1],16 // sal_ra
ld8 r9=[temp2],16 // sal_gp
;;
ld8 r22=[temp1],24 // pal_min_state, virtual. skip prev_task
ld8 r22=[temp1],16 // pal_min_state, virtual
ld8 r21=[temp2],16 // prev_IA64_KR_CURRENT
;;
ld8 r16=[temp1],16 // prev_IA64_KR_CURRENT_STACK
ld8 r20=[temp2],16 // prev_task
;;
ld8 temp3=[temp1],16 // cr.isr
ld8 temp4=[temp2],16 // cr.ifa
;;
......@@ -846,6 +852,45 @@ ia64_state_restore:
ld8 r8=[temp1] // os_status
ld8 r10=[temp2] // context
/* Wire IA64_TR_CURRENT_STACK to the stack that we are resuming to. To
* avoid any dependencies on the algorithm in ia64_switch_to(), just
* purge any existing CURRENT_STACK mapping and insert the new one.
*
* r16 contains prev_IA64_KR_CURRENT_STACK, r21 contains
* prev_IA64_KR_CURRENT, these values may have been changed by the C
* code. Do not use r8, r9, r10, r22, they contain values ready for
* the return to SAL.
*/
mov r15=IA64_KR(CURRENT_STACK) // physical granule mapped by IA64_TR_CURRENT_STACK
;;
shl r15=r15,IA64_GRANULE_SHIFT
;;
dep r15=-1,r15,61,3 // virtual granule
mov r18=IA64_GRANULE_SHIFT<<2 // for cr.itir.ps
;;
ptr.d r15,r18
;;
srlz.d
extr.u r19=r21,61,3 // r21 = prev_IA64_KR_CURRENT
shl r20=r16,IA64_GRANULE_SHIFT // r16 = prev_IA64_KR_CURRENT_STACK
movl r21=PAGE_KERNEL // page properties
;;
mov IA64_KR(CURRENT_STACK)=r16
cmp.ne p6,p0=RGN_KERNEL,r19 // new stack is in the kernel region?
or r21=r20,r21 // construct PA | page properties
(p6) br.spnt 1f // the dreaded cpu 0 idle task in region 5:(
;;
mov cr.itir=r18
mov cr.ifa=r21
mov r20=IA64_TR_CURRENT_STACK
;;
itr.d dtr[r20]=r21
;;
srlz.d
1:
br.sptk b0
//EndStub//////////////////////////////////////////////////////////////////////
......@@ -982,6 +1027,7 @@ ia64_set_kernel_registers:
add temp4=temp4, temp1 // &struct ia64_sal_os_state.os_gp
add r12=temp1, temp3 // kernel stack pointer on MCA/INIT stack
add r13=temp1, r3 // set current to start of MCA/INIT stack
add r20=temp1, r3 // physical start of MCA/INIT stack
;;
ld8 r1=[temp4] // OS GP from SAL OS state
;;
......@@ -991,7 +1037,35 @@ ia64_set_kernel_registers:
;;
mov IA64_KR(CURRENT)=r13
// FIXME: do I need to wire IA64_KR_CURRENT_STACK and IA64_TR_CURRENT_STACK?
/* Wire IA64_TR_CURRENT_STACK to the MCA/INIT handler stack. To avoid
* any dependencies on the algorithm in ia64_switch_to(), just purge
* any existing CURRENT_STACK mapping and insert the new one.
*/
mov r16=IA64_KR(CURRENT_STACK) // physical granule mapped by IA64_TR_CURRENT_STACK
;;
shl r16=r16,IA64_GRANULE_SHIFT
;;
dep r16=-1,r16,61,3 // virtual granule
mov r18=IA64_GRANULE_SHIFT<<2 // for cr.itir.ps
;;
ptr.d r16,r18
;;
srlz.d
shr.u r16=r20,IA64_GRANULE_SHIFT // r20 = physical start of MCA/INIT stack
movl r21=PAGE_KERNEL // page properties
;;
mov IA64_KR(CURRENT_STACK)=r16
or r21=r20,r21 // construct PA | page properties
;;
mov cr.itir=r18
mov cr.ifa=r13
mov r20=IA64_TR_CURRENT_STACK
;;
itr.d dtr[r20]=r21
;;
srlz.d
br.sptk b0
......
......@@ -80,7 +80,12 @@ struct ia64_sal_os_state {
u64 sal_ra; /* Return address in SAL, physical */
u64 sal_gp; /* GP of the SAL - physical */
pal_min_state_area_t *pal_min_state; /* from R17. physical in asm, virtual in C */
/* Previous values of IA64_KR(CURRENT) and IA64_KR(CURRENT_STACK).
* Note: if the MCA/INIT recovery code wants to resume to a new context
* then it must change these values to reflect the new kernel stack.
*/
u64 prev_IA64_KR_CURRENT; /* previous value of IA64_KR(CURRENT) */
u64 prev_IA64_KR_CURRENT_STACK;
struct task_struct *prev_task; /* previous task, NULL if it is not useful */
/* Some interrupt registers are not saved in minstate, pt_regs or
* switch_stack. Because MCA/INIT can occur when interrupts are
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment