Commit 20cfa93b authored by Jeff Garzik's avatar Jeff Garzik

Add basic ethtool ioctl support to pcmcia net drivers

3c589_cs, aironet4500_cs, and fmvj18x_cs.
parent 28334aab
......@@ -17,6 +17,9 @@
======================================================================*/
#define DRV_NAME "3c589_cs"
#define DRV_VERSION "1.162"
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
......@@ -28,6 +31,9 @@
#include <linux/interrupt.h>
#include <linux/in.h>
#include <linux/delay.h>
#include <linux/ethtool.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/system.h>
#include <asm/bitops.h>
......@@ -134,7 +140,7 @@ MODULE_PARM(irq_list, "1-4i");
INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
static char *version =
"3c589_cs.c 1.162 2001/10/13 00:08:50 (David Hinds)";
DRV_NAME ".c " DRV_VERSION " 2001/10/13 00:08:50 (David Hinds)";
#else
#define DEBUG(n, args...)
#endif
......@@ -159,6 +165,7 @@ static int el3_rx(struct net_device *dev);
static int el3_close(struct net_device *dev);
static void el3_tx_timeout(struct net_device *dev);
static void set_multicast_list(struct net_device *dev);
static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd);
static dev_info_t dev_info = "3c589_cs";
......@@ -249,7 +256,8 @@ static dev_link_t *tc589_attach(void)
dev->tx_timeout = el3_tx_timeout;
dev->watchdog_timeo = TX_TIMEOUT;
#endif
dev->do_ioctl = netdev_ioctl;
/* Register with Card Services */
link->next = dev_list;
dev_list = link;
......@@ -640,6 +648,71 @@ static void tc589_reset(struct net_device *dev)
| AdapterFailure, ioaddr + EL3_CMD);
}
static int netdev_ethtool_ioctl (struct net_device *dev, void *useraddr)
{
u32 ethcmd;
/* dev_ioctl() in ../../net/core/dev.c has already checked
capable(CAP_NET_ADMIN), so don't bother with that here. */
if (get_user(ethcmd, (u32 *)useraddr))
return -EFAULT;
switch (ethcmd) {
case ETHTOOL_GDRVINFO: {
struct ethtool_drvinfo info = { ETHTOOL_GDRVINFO };
strcpy (info.driver, DRV_NAME);
strcpy (info.version, DRV_VERSION);
sprintf(info.bus_info, "PCMCIA 0x%lx", dev->base_addr);
if (copy_to_user (useraddr, &info, sizeof (info)))
return -EFAULT;
return 0;
}
#ifdef PCMCIA_DEBUG
/* get message-level */
case ETHTOOL_GMSGLVL: {
struct ethtool_value edata = {ETHTOOL_GMSGLVL};
edata.data = pc_debug;
if (copy_to_user(useraddr, &edata, sizeof(edata)))
return -EFAULT;
return 0;
}
/* set message-level */
case ETHTOOL_SMSGLVL: {
struct ethtool_value edata;
if (copy_from_user(&edata, useraddr, sizeof(edata)))
return -EFAULT;
pc_debug = edata.data;
return 0;
}
#endif
default:
break;
}
return -EOPNOTSUPP;
}
static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
{
int rc;
switch (cmd) {
case SIOCETHTOOL:
rc = netdev_ethtool_ioctl(dev, (void *) rq->ifr_data);
break;
default:
rc = -EOPNOTSUPP;
break;
}
return rc;
}
static int el3_config(struct net_device *dev, struct ifmap *map)
{
if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) {
......
......@@ -10,8 +10,11 @@
*
*/
#define DRV_NAME "aironet4500_cs"
#define DRV_VERSION "0.1"
static const char *awc_version =
"aironet4500_cs.c v0.1 1/1/99 Elmer Joandi, elmer@ylenurme.ee.\n";
DRV_NAME ".c v" DRV_VERSION " 1/1/99 Elmer Joandi, elmer@ylenurme.ee.\n";
#include <linux/module.h>
......@@ -24,6 +27,9 @@ static const char *awc_version =
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/in.h>
#include <linux/ethtool.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/system.h>
#include <asm/bitops.h>
......@@ -159,6 +165,66 @@ static int awc_pcmcia_close(struct net_device *dev)
return ret;
}
static int netdev_ethtool_ioctl (struct net_device *dev, void *useraddr)
{
u32 ethcmd;
/* dev_ioctl() in ../../net/core/dev.c has already checked
capable(CAP_NET_ADMIN), so don't bother with that here. */
if (get_user(ethcmd, (u32 *)useraddr))
return -EFAULT;
switch (ethcmd) {
case ETHTOOL_GDRVINFO: {
struct ethtool_drvinfo info = { ETHTOOL_GDRVINFO };
strcpy (info.driver, DRV_NAME);
strcpy (info.version, DRV_VERSION);
sprintf(info.bus_info, "PCMCIA 0x%lx", dev->base_addr);
if (copy_to_user (useraddr, &info, sizeof (info)))
return -EFAULT;
return 0;
}
#ifdef PCMCIA_DEBUG
/* get message-level */
case ETHTOOL_GMSGLVL: {
struct ethtool_value edata = {ETHTOOL_GMSGLVL};
edata.data = pc_debug;
if (copy_to_user(useraddr, &edata, sizeof(edata)))
return -EFAULT;
return 0;
}
/* set message-level */
case ETHTOOL_SMSGLVL: {
struct ethtool_value edata;
if (copy_from_user(&edata, useraddr, sizeof(edata)))
return -EFAULT;
pc_debug = edata.data;
return 0;
}
#endif
default:
break;
}
return -EOPNOTSUPP;
}
static int awc_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
switch (cmd) {
case SIOCETHTOOL:
return netdev_ethtool_ioctl(dev, (void *) rq->ifr_data);
default:
return -EOPNOTSUPP;
}
return 0;
}
/*
awc_attach() creates an "instance" of the driver, allocating
local data structures for one device. The device is registered
......@@ -230,7 +296,8 @@ static dev_link_t *awc_attach(void)
// dev->set_config = &awc_config_misiganes,aga mitte awc_config;
dev->get_stats = &awc_get_stats;
// dev->set_multicast_list = &awc_set_multicast_list;
dev->do_ioctl = &awc_ioctl;
strcpy(dev->name, ((struct awc_private *)dev->priv)->node.dev_name);
ether_setup(dev);
......
......@@ -28,6 +28,9 @@
======================================================================*/
#define DRV_NAME "fmvj18x_cs"
#define DRV_VERSION "2.6"
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
......@@ -39,6 +42,9 @@
#include <linux/interrupt.h>
#include <linux/in.h>
#include <linux/delay.h>
#include <linux/ethtool.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/system.h>
......@@ -74,7 +80,7 @@ INT_MODULE_PARM(sram_config, 0);
#ifdef PCMCIA_DEBUG
INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
static char *version = "fmvj18x_cs.c 2.6 2001/09/17";
static char *version = DRV_NAME ".c " DRV_VERSION " 2001/09/17";
#else
#define DEBUG(n, args...)
#endif
......@@ -104,6 +110,7 @@ static void fjn_reset(struct net_device *dev);
static struct net_device_stats *fjn_get_stats(struct net_device *dev);
static void set_rx_mode(struct net_device *dev);
static void fjn_tx_timeout(struct net_device *dev);
static int fjn_ioctl(struct net_device *, struct ifreq *, int);
static dev_info_t dev_info = "fmvj18x_cs";
static dev_link_t *dev_list;
......@@ -316,6 +323,7 @@ static dev_link_t *fmvj18x_attach(void)
dev->tx_timeout = fjn_tx_timeout;
dev->watchdog_timeo = TX_TIMEOUT;
#endif
dev->do_ioctl = fjn_ioctl;
/* Register with Card Services */
link->next = dev_list;
......@@ -1103,6 +1111,65 @@ static void fjn_rx(struct net_device *dev)
/*====================================================================*/
static int netdev_ethtool_ioctl (struct net_device *dev, void *useraddr)
{
u32 ethcmd;
/* dev_ioctl() in ../../net/core/dev.c has already checked
capable(CAP_NET_ADMIN), so don't bother with that here. */
if (get_user(ethcmd, (u32 *)useraddr))
return -EFAULT;
switch (ethcmd) {
case ETHTOOL_GDRVINFO: {
struct ethtool_drvinfo info = { ETHTOOL_GDRVINFO };
strcpy (info.driver, DRV_NAME);
strcpy (info.version, DRV_VERSION);
sprintf(info.bus_info, "PCMCIA 0x%lx", dev->base_addr);
if (copy_to_user (useraddr, &info, sizeof (info)))
return -EFAULT;
return 0;
}
#ifdef PCMCIA_DEBUG
/* get message-level */
case ETHTOOL_GMSGLVL: {
struct ethtool_value edata = {ETHTOOL_GMSGLVL};
edata.data = pc_debug;
if (copy_to_user(useraddr, &edata, sizeof(edata)))
return -EFAULT;
return 0;
}
/* set message-level */
case ETHTOOL_SMSGLVL: {
struct ethtool_value edata;
if (copy_from_user(&edata, useraddr, sizeof(edata)))
return -EFAULT;
pc_debug = edata.data;
return 0;
}
#endif
default:
break;
}
return -EOPNOTSUPP;
}
static int fjn_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
switch (cmd) {
case SIOCETHTOOL:
return netdev_ethtool_ioctl(dev, (void *) rq->ifr_data);
default:
return -EOPNOTSUPP;
}
}
static int fjn_config(struct net_device *dev, struct ifmap *map){
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment