Commit 20ed7c09 authored by Jeff Garzik's avatar Jeff Garzik

[netdrvr] 3c59x: snip changelog from source code

Driver source code is not the preferred place to store change history.
Acked-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent 2c1a1088
......@@ -17,172 +17,6 @@
410 Severn Ave., Suite 210
Annapolis MD 21403
Linux Kernel Additions:
0.99H+lk0.9 - David S. Miller - softnet, PCI DMA updates
0.99H+lk1.0 - Jeff Garzik <jgarzik@pobox.com>
Remove compatibility defines for kernel versions < 2.2.x.
Update for new 2.3.x module interface
LK1.1.2 (March 19, 2000)
* New PCI interface (jgarzik)
LK1.1.3 25 April 2000, Andrew Morton <andrewm@uow.edu.au>
- Merged with 3c575_cb.c
- Don't set RxComplete in boomerang interrupt enable reg
- spinlock in vortex_timer to protect mdio functions
- disable local interrupts around call to vortex_interrupt in
vortex_tx_timeout() (So vortex_interrupt can use spin_lock())
- Select window 3 in vortex_timer()'s write to Wn3_MAC_Ctrl
- In vortex_start_xmit(), move the lock to _after_ we've altered
vp->cur_tx and vp->tx_full. This defeats the race between
vortex_start_xmit() and vortex_interrupt which was identified
by Bogdan Costescu.
- Merged back support for six new cards from various sources
- Set vortex_have_pci if pci_module_init returns zero (fixes cardbus
insertion oops)
- Tell it that 3c905C has NWAY for 100bT autoneg
- Fix handling of SetStatusEnd in 'Too much work..' code, as
per 2.3.99's 3c575_cb (Dave Hinds).
- Split ISR into two for vortex & boomerang
- Fix MOD_INC/DEC races
- Handle resource allocation failures.
- Fix 3CCFE575CT LED polarity
- Make tx_interrupt_mitigation the default
LK1.1.4 25 April 2000, Andrew Morton <andrewm@uow.edu.au>
- Add extra TxReset to vortex_up() to fix 575_cb hotplug initialisation probs.
- Put vortex_info_tbl into __devinitdata
- In the vortex_error StatsFull HACK, disable stats in vp->intr_enable as well
as in the hardware.
- Increased the loop counter in issue_and_wait from 2,000 to 4,000.
LK1.1.5 28 April 2000, andrewm
- Added powerpc defines (John Daniel <jdaniel@etresoft.com> said these work...)
- Some extra diagnostics
- In vortex_error(), reset the Tx on maxCollisions. Otherwise most
chips usually get a Tx timeout.
- Added extra_reset module parm
- Replaced some inline timer manip with mod_timer
(Franois romieu <Francois.Romieu@nic.fr>)
- In vortex_up(), don't make Wn3_config initialisation dependent upon has_nway
(this came across from 3c575_cb).
LK1.1.6 06 Jun 2000, andrewm
- Backed out the PPC defines.
- Use del_timer_sync(), mod_timer().
- Fix wrapped ulong comparison in boomerang_rx()
- Add IS_TORNADO, use it to suppress 3c905C checksum error msg
(Donald Becker, I Lee Hetherington <ilh@sls.lcs.mit.edu>)
- Replace union wn3_config with BFINS/BFEXT manipulation for
sparc64 (Pete Zaitcev, Peter Jones)
- In vortex_error, do_tx_reset and vortex_tx_timeout(Vortex):
do a netif_wake_queue() to better recover from errors. (Anders Pedersen,
Donald Becker)
- Print a warning on out-of-memory (rate limited to 1 per 10 secs)
- Added two more Cardbus 575 NICs: 5b57 and 6564 (Paul Wagland)
LK1.1.7 2 Jul 2000 andrewm
- Better handling of shared IRQs
- Reset the transmitter on a Tx reclaim error
- Fixed crash under OOM during vortex_open() (Mark Hemment)
- Fix Rx cessation problem during OOM (help from Mark Hemment)
- The spinlocks around the mdio access were blocking interrupts for 300uS.
Fix all this to use spin_lock_bh() within mdio_read/write
- Only write to TxFreeThreshold if it's a boomerang - other NICs don't
have one.
- Added 802.3x MAC-layer flow control support
LK1.1.8 13 Aug 2000 andrewm
- Ignore request_region() return value - already reserved if Cardbus.
- Merged some additional Cardbus flags from Don's 0.99Qk
- Some fixes for 3c556 (Fred Maciel)
- Fix for EISA initialisation (Jan Rekorajski)
- Renamed MII_XCVR_PWR and EEPROM_230 to align with 3c575_cb and D. Becker's drivers
- Fixed MII_XCVR_PWR for 3CCFE575CT
- Added INVERT_LED_PWR, used it.
- Backed out the extra_reset stuff
LK1.1.9 12 Sep 2000 andrewm
- Backed out the tx_reset_resume flags. It was a no-op.
- In vortex_error, don't reset the Tx on txReclaim errors
- In vortex_error, don't reset the Tx on maxCollisions errors.
Hence backed out all the DownListPtr logic here.
- In vortex_error, give Tornado cards a partial TxReset on
maxCollisions (David Hinds). Defined MAX_COLLISION_RESET for this.
- Redid some driver flags and device names based on pcmcia_cs-3.1.20.
- Fixed a bug where, if vp->tx_full is set when the interface
is downed, it remains set when the interface is upped. Bad
things happen.
LK1.1.10 17 Sep 2000 andrewm
- Added EEPROM_8BIT for 3c555 (Fred Maciel)
- Added experimental support for the 3c556B Laptop Hurricane (Louis Gerbarg)
- Add HAS_NWAY to "3c900 Cyclone 10Mbps TPO"
LK1.1.11 13 Nov 2000 andrewm
- Dump MOD_INC/DEC_USE_COUNT, use SET_MODULE_OWNER
LK1.1.12 1 Jan 2001 andrewm (2.4.0-pre1)
- Call pci_enable_device before we request our IRQ (Tobias Ringstrom)
- Add 3c590 PCI latency timer hack to vortex_probe1 (from 0.99Ra)
- Added extended issue_and_wait for the 3c905CX.
- Look for an MII on PHY index 24 first (3c905CX oddity).
- Add HAS_NWAY to 3cSOHO100-TX (Brett Frankenberger)
- Don't free skbs we don't own on oom path in vortex_open().
LK1.1.13 27 Jan 2001
- Added explicit `medialock' flag so we can truly
lock the media type down with `options'.
- "check ioremap return and some tidbits" (Arnaldo Carvalho de Melo <acme@conectiva.com.br>)
- Added and used EEPROM_NORESET for 3c556B PM resumes.
- Fixed leakage of vp->rx_ring.
- Break out separate HAS_HWCKSM device capability flag.
- Kill vp->tx_full (ANK)
- Merge zerocopy fragment handling (ANK?)
LK1.1.14 15 Feb 2001
- Enable WOL. Can be turned on with `enable_wol' module option.
- EISA and PCI initialisation fixes (jgarzik, Manfred Spraul)
- If a device's internalconfig register reports it has NWAY,
use it, even if autoselect is enabled.
LK1.1.15 6 June 2001 akpm
- Prevent double counting of received bytes (Lars Christensen)
- Add ethtool support (jgarzik)
- Add module parm descriptions (Andrzej M. Krzysztofowicz)
- Implemented alloc_etherdev() API
- Special-case the 'Tx error 82' message.
LK1.1.16 18 July 2001 akpm
- Make NETIF_F_SG dependent upon nr_free_highpages(), not on CONFIG_HIGHMEM
- Lessen verbosity of bootup messages
- Fix WOL - use new PM API functions.
- Use netif_running() instead of vp->open in suspend/resume.
- Don't reset the interface logic on open/close/rmmod. It upsets
autonegotiation, and hence DHCP (from 0.99T).
- Back out EEPROM_NORESET flag because of the above (we do it for all
NICs).
- Correct 3c982 identification string
- Rename wait_for_completion() to issue_and_wait() to avoid completion.h
clash.
LK1.1.17 18Dec01 akpm
- PCI ID 9805 is a Python-T, not a dual-port Cyclone. Apparently.
And it has NWAY.
- Mask our advertised modes (vp->advertising) with our capabilities
(MII reg5) when deciding which duplex mode to use.
- Add `global_options' as default for options[]. Ditto global_enable_wol,
global_full_duplex.
LK1.1.18 01Jul02 akpm
- Fix for undocumented transceiver power-up bit on some 3c566B's
(Donald Becker, Rahul Karnik)
- See http://www.zip.com.au/~akpm/linux/#3c59x-2.3 for more details.
- Also see Documentation/networking/vortex.txt
LK1.1.19 10Nov02 Marc Zyngier <maz@wild-wind.fr.eu.org>
- EISA sysfs integration.
*/
/*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment